ThinkWiki - User contributions [en]

Installing openSUSE 10.2 on an IBM ThinkPad T60

2007-09-10T08:35:57Z

Stooofer: /* What had to be configured by hand */

= Lenovo ThinkPad {{T60}} (model 2623-D6U) =

== Hardware Details ==

* Intel Core Duo T7600 (2.33GHz, 2MB L2, 667MHz FSB)
* 2GB RAM (2 NonParity DDR2 SDRAM SoDIMM PC2-5300)
* ATI Mobility Radeon X1400
* 15.4inch WXGA (1600x1200)
* 100GB, 7200rpm Serial ATA (Hitachi HTS541080G9SA00)
* Intel PRO/1000 Gigabit Ethernet
* Intel PRO/Wireless 3945ABG
* Bluetooth
* Firewire
* SD Card Reader
* 56K V.92 Modem

== Software Details ==

* [http://en.opensuse.org/Released_Version openSUSE 10.2] retail DVD9 iso

== Installation procedure ==

=== Setup ===

You could start the installation procedure using a USB Stick. [http://en.opensuse.org/Installation_without_CD#Creating_a_bootable_USB_Stick_from_Linux instructions to set up a boot USB key]. This contains GRUB and the loader for the installer. The actual installation media was on an NFS share. To set this up, copy the contents of the CDS/DVD into a directory (or mount the DVD iso image loopback) then share the directory containing CD1 via NFS, is the simplest way. Sharing the DVD as a SMB share works from windows, too.

You could also install over the network or using the DVD or CD's.

=== Installation from USB Key Notes ===

Press F12 during POST to get the boot selector menu up, choose the USB Key. This boots into GRUB. Press F4 here to set the installation source to NFS or SMB as needed, and enter the server details. For example, with SMB, enter the server name, the name of the share, and the directory where the first CD's contents are, eg 'CD1'. Now the installer is loaded from the share and proceeds as a usual SUSE install. No special steps are required during the install, but read the documentation about [[ Pre-Installation_steps | preserving or moving the ThinkVantage rescue partition ]] before you commit to the installation.

{{NOTE|After installing the software, the installer reboots into the installed system to configure it, as usual. Note that because it was booted from a USB key, GRUB has been installed onto the key instead of the hard disk. You can correct this after the configuration is completed, but for now, keep the USB key inserted, boot from that again. The GRUB menu boots the installed system from the hard disk, just like the old days with LILO and a boot floppy. Once the installation and you're logged in, start YaST2, go to System, Bootloader, and change the boot loader location to its proper location (I recommend the boot or root partition with the Generic MBR option). Now the laptop can boot on its own. }}

== What works out of the box ==

=== Hardware ===

* Ethernet adaptor
* Intel 3945ABG Wireless ethernet adapter
{{NOTE|Install w/Extra's CD, or later you will need to install the '''ipw-firmware''' and '''ipw3945d''' packages from a non-oss repository or the Extras CD. Also, make sure when you are testing that you have the hardware based network kill switch turned off for network/bluetooth. It is located near the IR port in the front. You can also turn the kill switch on and off using ''Fn + F5'', so you do not really need to use the hardware based kill switch should not be enabled.}}
* VESA Graphics (crappy, yet functional out of box)
* Sound playback
{{NOTE|You may need to fiddle around with the mute and volume buttons, or sound may appear to be not working and the driver may get interrupt timeout messages.}}
* USB
* Bluetooth
* Trackpoint

=== Power management etc ===

* Suspend to disk (Fn+F12)
* Suspend to RAM (Fn+F4)
* Disable display (Fn+F3)
* CPU speed stepping (required BIOS update to 2.05 though)
* LCD Brightness depending on current power scheme, via KPowersave and HAL

=== Extra keys ===

* Volume control, keyboard light and screen brightness control
* Lid switch (LCD off when lid closed, resume from suspend to RAM when opened)
* Multimedia keys with KMix and Amarok
* Browser back/forward keys with Konqueror

== What had to be configured by hand ==

* Mouse wheel emulation, set "Emulate Mouse wheel with button 2" in SaX2 mouse settings
* (From X60 Howto, unconfirmed) Keyboard dead keys for international characters, set "Right Alt is Compose" in SaX2 keyboard settings, then ralt-shift-2, a => Ã¤
* (From X60 Howto, unconfirmed) Sound recording, using KMix or other mixer, set the mic as capture source, turn it up, enable and turn up 'Capture' channel.
* By default the fan runs all the time. If power management on the ipw3945 is enabled, it only runs about 1/3 of the time. Use 'iwpriv eth1 set_power 7' to enable power management - this comes at the cost of increasing latency when using wireless. See [http://ipw3945.sourceforge.net/README.ipw3945 the ipw3495 README] for details
* Fingerprint reader, see http://www.thinkwiki.org/wiki/How_to_enable_the_fingerprint_reader_with_ThinkFinger

=== Acceleration for ATI Mobility Radeon X1300 ===

You will need to follow this howto to install the driver:

http://www.suse.de/~sndirsch/ati-installer-HOWTO.html

Make sure to install gcc and kernel-source before running the ati-driver-installer program.

After that, you should be able to set up dual headed modes w/external LCD's and all that other fun stuff.

=== TrackPoint Scrolling ===

By default you can use the right and bottom edges of your touchpad to scroll through documents. If you use the TrackPoint instad of the touchpad, you'll find that scrolling is disabled by default. To enable it, edit the file '''/etc/X11/xorg.conf'''

Now find the entry for your TrackPoint device. It looks something like this:

<pre>
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Colorado Kensington Mouse-in-a-box"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
</pre>

Now, add the following two options in that InputDevice section:

<pre>
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
</pre>

Save and exit the file. Restart your ThinkPad (or logout, and press CTRL-ALT-BACKSPACE). You should now be able to scoll by holding down the middle button for your TrackPoint and using the TrackPoint to scroll.

== What doesn't work yet ==

== Not tested yet ==

* Firewire
* PCMCIA slot
* Embedded Security Subsystem (TCPA)
* Active Protection System (HDAPS)
* Modem
* Maximum battery life

== lscpi ==
<pre>> lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [ATI Mobility Radeon X1300]
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
</pre>

= References / Resources =

; Get lots of multimedia stuff installed (like DVD playback, RealPlayer, and QuickTime...) : http://en.opensuse.org/OpenSUSE_10.2_multimedia_galore_HOWTO
[[Category: openSUSE]] [[Category: t60]]

Installing openSUSE 10.2 on an IBM ThinkPad T60

2007-09-10T08:33:24Z

Stooofer: /* Not tested yet */

= Lenovo ThinkPad {{T60}} (model 2623-D6U) =

== Hardware Details ==

* Intel Core Duo T7600 (2.33GHz, 2MB L2, 667MHz FSB)
* 2GB RAM (2 NonParity DDR2 SDRAM SoDIMM PC2-5300)
* ATI Mobility Radeon X1400
* 15.4inch WXGA (1600x1200)
* 100GB, 7200rpm Serial ATA (Hitachi HTS541080G9SA00)
* Intel PRO/1000 Gigabit Ethernet
* Intel PRO/Wireless 3945ABG
* Bluetooth
* Firewire
* SD Card Reader
* 56K V.92 Modem

== Software Details ==

* [http://en.opensuse.org/Released_Version openSUSE 10.2] retail DVD9 iso

== Installation procedure ==

=== Setup ===

You could start the installation procedure using a USB Stick. [http://en.opensuse.org/Installation_without_CD#Creating_a_bootable_USB_Stick_from_Linux instructions to set up a boot USB key]. This contains GRUB and the loader for the installer. The actual installation media was on an NFS share. To set this up, copy the contents of the CDS/DVD into a directory (or mount the DVD iso image loopback) then share the directory containing CD1 via NFS, is the simplest way. Sharing the DVD as a SMB share works from windows, too.

You could also install over the network or using the DVD or CD's.

=== Installation from USB Key Notes ===

Press F12 during POST to get the boot selector menu up, choose the USB Key. This boots into GRUB. Press F4 here to set the installation source to NFS or SMB as needed, and enter the server details. For example, with SMB, enter the server name, the name of the share, and the directory where the first CD's contents are, eg 'CD1'. Now the installer is loaded from the share and proceeds as a usual SUSE install. No special steps are required during the install, but read the documentation about [[ Pre-Installation_steps | preserving or moving the ThinkVantage rescue partition ]] before you commit to the installation.

{{NOTE|After installing the software, the installer reboots into the installed system to configure it, as usual. Note that because it was booted from a USB key, GRUB has been installed onto the key instead of the hard disk. You can correct this after the configuration is completed, but for now, keep the USB key inserted, boot from that again. The GRUB menu boots the installed system from the hard disk, just like the old days with LILO and a boot floppy. Once the installation and you're logged in, start YaST2, go to System, Bootloader, and change the boot loader location to its proper location (I recommend the boot or root partition with the Generic MBR option). Now the laptop can boot on its own. }}

== What works out of the box ==

=== Hardware ===

* Ethernet adaptor
* Intel 3945ABG Wireless ethernet adapter
{{NOTE|Install w/Extra's CD, or later you will need to install the '''ipw-firmware''' and '''ipw3945d''' packages from a non-oss repository or the Extras CD. Also, make sure when you are testing that you have the hardware based network kill switch turned off for network/bluetooth. It is located near the IR port in the front. You can also turn the kill switch on and off using ''Fn + F5'', so you do not really need to use the hardware based kill switch should not be enabled.}}
* VESA Graphics (crappy, yet functional out of box)
* Sound playback
{{NOTE|You may need to fiddle around with the mute and volume buttons, or sound may appear to be not working and the driver may get interrupt timeout messages.}}
* USB
* Bluetooth
* Trackpoint

=== Power management etc ===

* Suspend to disk (Fn+F12)
* Suspend to RAM (Fn+F4)
* Disable display (Fn+F3)
* CPU speed stepping (required BIOS update to 2.05 though)
* LCD Brightness depending on current power scheme, via KPowersave and HAL

=== Extra keys ===

* Volume control, keyboard light and screen brightness control
* Lid switch (LCD off when lid closed, resume from suspend to RAM when opened)
* Multimedia keys with KMix and Amarok
* Browser back/forward keys with Konqueror

== What had to be configured by hand ==

* Mouse wheel emulation, set "Emulate Mouse wheel with button 2" in SaX2 mouse settings
* (From X60 Howto, unconfirmed) Keyboard dead keys for international characters, set "Right Alt is Compose" in SaX2 keyboard settings, then ralt-shift-2, a => Ã¤
* (From X60 Howto, unconfirmed) Sound recording, using KMix or other mixer, set the mic as capture source, turn it up, enable and turn up 'Capture' channel.
* By default the fan runs all the time. If power management on the ipw3945 is enabled, it only runs about 1/3 of the time. Use 'iwpriv eth1 set_power 7' to enable power management - this comes at the cost of increasing latency when using wireless. See [http://ipw3945.sourceforge.net/README.ipw3945 the ipw3495 README] for details

=== Acceleration for ATI Mobility Radeon X1300 ===

You will need to follow this howto to install the driver:

http://www.suse.de/~sndirsch/ati-installer-HOWTO.html

Make sure to install gcc and kernel-source before running the ati-driver-installer program.

After that, you should be able to set up dual headed modes w/external LCD's and all that other fun stuff.

=== TrackPoint Scrolling ===

By default you can use the right and bottom edges of your touchpad to scroll through documents. If you use the TrackPoint instad of the touchpad, you'll find that scrolling is disabled by default. To enable it, edit the file '''/etc/X11/xorg.conf'''

Now find the entry for your TrackPoint device. It looks something like this:

<pre>
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Colorado Kensington Mouse-in-a-box"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
</pre>

Now, add the following two options in that InputDevice section:

<pre>
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
</pre>

Save and exit the file. Restart your ThinkPad (or logout, and press CTRL-ALT-BACKSPACE). You should now be able to scoll by holding down the middle button for your TrackPoint and using the TrackPoint to scroll.

== What doesn't work yet ==

== Not tested yet ==

* Firewire
* PCMCIA slot
* Embedded Security Subsystem (TCPA)
* Active Protection System (HDAPS)
* Modem
* Maximum battery life

== lscpi ==
<pre>> lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [ATI Mobility Radeon X1300]
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
</pre>

= References / Resources =

; Get lots of multimedia stuff installed (like DVD playback, RealPlayer, and QuickTime...) : http://en.opensuse.org/OpenSUSE_10.2_multimedia_galore_HOWTO
[[Category: openSUSE]] [[Category: t60]]

Talk:How to enable integrated fingerprint reader with BioAPI

2007-01-07T23:12:14Z

Stooofer: /* Using instructions with OpenSuSE 10.1 */

== Removing the GUI Prompt ==
For all of you that have had the oppertunity to see the fingerprint image, I think we can all agree that this needs to be changed at ounce. A couple of ideas come to mind, first is to trick bioapi to think that X is not running, and secound is to figure out where the images are being pulled from and then edit them. The later would be nice, but I have been experimenting with strace for several hours and have came up with nothing. Any other ideas?

--[[User:Paul Strefling|Paul Strefling]] 18:42, 18 July 2006 (CEST)
----

== chmod 777 -R /usr/local/var/bioapi/ ==

Is the above necessary? I just made a debian package of xscreensaver with the patch applied, and when using the bioapi debian pacakge from [http://www.qrivy.net/~michael/temp/ Michael R. Crusoe's site] which has this directory put in /usr/var/bioapi I had not to change the permissions to world-writeable there. Write access to the logfile and usb device are necessary, but that directory works with 755 as well (even though it comes with 777 in Michael's package), and all files and subdirectories are 644/755 too.

--[[User:Spiney|spiney]] 00:08, 11 Nov 2005 (CET)
----

== Qt Compilation Success ==

Here it worked with qt ;)

--

I didn't get it to work anyway, but I'm curious about your Qt version(s) as it seemed to want Qt 3 when I was playing with it.

--[[User:Keegan|keegan]] 05:07, 24 Dec 2005 (CET)

== using absolute paths for commands ==

I don't know whether using absolute paths in the articles is a good idea, at least not for tools like {{cmd|lsusb|}} which are not established utilities (i.e. used for more than a decade or something ;)) and happen to be in different locations in different distributions. E.g. said {{cmd|lsusb|}} resides in {{path|/usr/sbin|}} on Debian systems.

--[[User:Spiney|spiney]] 16:45, 12 Nov 2005 (CET)
----

I'm using debian testing and it's in {{path|/usr/bin|}}. I agree that the confusion is bad; dropping the absolute paths and adding a general note about checking {{cmd|$PATH|}} in case of problems is probably good.

--[[User:keegan|keegan]]

== BioAPI error #3 ==

Its kind of strage it used to work with everythig (kdm,console,lock,etc)
Now it only works with kdm. It allways gives back:

pam_bioapi[8113]: Unable to initialize Bioapi framework, BioAPI error #:3.

Even when I set the right permissions on /proc/bus/usb.

I am able to run the Sample program as normal user after setting the permissions, but when I change within a user session by su I amnot able to run the Sample program a also get an error Code #3.

From an other terminal (alt+strg+Fx) I am able to run the Sample program but at the login I still get the error #3.

I cant remember to have changed anything an d bevor I was able to login in a console with my fingerprint now only kdm is working even kde lock-session
isnt working anymore.

Any suggestions ?

==Permission errors exclusive to xscreensaver==

I followed the instructions above and got everything working, including non-root programs like xscreensaver. However, the script to change usbfs permissions is finicky and fails to work with a lot of things like suspend/resume. Therefore, I switched to specifying <tt>devgid=108,devmode=0660,busgid=108,busmode=0770,listgid=108,listmode=0660</tt> as mount parameters for usbfs, where group 108 is a group I created and added my normal user to. This seems like a much better way of doing things, and it almost works. However, xscreensaver (using the newer patch) gives the familiar <tt>Unable to load BioAPI BSP with UUID of <nowiki>{</nowiki>5550454b-2054-464d-2f45-535320425350<nowiki>}</nowiki>, BioAPI error #194d.</tt> error in {{path|/var/log/auth.log|}}. I don't think this is a straightfoward permissions problem because
<ul>
<li>the permissions in {{path|/proc/bus/usb|}} are correct by inspection</li>
<li>I can write to the device file as my normal user</li>
<li>other programs like {{cmd|test_verify-pam_bioapi|}} and [http://pamtester.sourceforge.net/ {{cmd|pamtester|}}] work as my normal user</li>
<li>the weirdest one: xscreensaver works when the {{cmd|xscreensaver|}} daemon is launched from within {{cmd|strace|}}. It's still running as my normal user ({{cmd|strace|}} is not setuid root). I have absolutely no idea what would cause this. I thought it might be an environment issue, but the difference in environment between the {{cmd|strace|}} session and my normal session is trivial.</li>
</ul>

At this point I'm hoping it's something dumb, but I'm out of ideas. The {{cmd|xscreensaver|}} error is <tt>pam_authenticate (...) ==> 7 (Authentication failure)</tt>, for the record.

--[[User:keegan|keegan]]
----

I had the same problem and found that it was caused by the setuid permission on xscreensaver. After chmod'ing it to 755 and restarting xscreensaver, bioapi authentication worked.

--[[User:henning|henning]] 09:22, 8 Aug 2006 (CET)
----

Could you provide all the log lines between pam_start and pam_end when running {{cmd|xscreensaver -verbose|}}?

BTW, the idea with using the mount options for usbfs is very good, maybe you should add that info to the article page? I use the permission changing script without problems, also after resume, but the usbfs version is probably easier to set up, most people will be able to find {{path|/etc/fstab|}}.

--[[User:Spiney|spiney]] 10:12, 23 Dec 2005 (CET)
----
<pre>
xscreensaver: 20:56:01: alternative_pam: 1 -> pam service: xscreensaver-alternative
xscreensaver: 20:56:01: pam_start ("xscreensaver-alternative", "keegan", ...) ==> 0 (Success)
xscreensaver: 20:56:01: pam_set_item (p, PAM_TTY, ":0.0") ==> 0 (Success)
xscreensaver: 20:56:01: PAM ECHO_OFF("Password: ") ==> password
xscreensaver: 20:56:03: pam_authenticate (...) ==> 7 (Authentication failure)
xscreensaver: 20:56:03: pam_end (...) ==> 0 (Success)
xscreensaver: 20:56:03: prompting for password.
xscreensaver: 20:56:03: 0: creating password dialog.
xscreensaver: 20:56:03: 0: mouse is at 442,412.
xscreensaver: 20:56:03: grabbing server...
xscreensaver: 20:56:03: 0: ungrabbing mouse (was 0x48).
xscreensaver: 20:56:03: 0: grabbing mouse on 0xe0002b... GrabSuccess.
xscreensaver: 20:56:03: ungrabbing server.
xscreensaver: 20:56:05: alternative_pam: 12582928 -> pam service: xscreensaver
xscreensaver: 20:56:05: pam_start ("xscreensaver", "keegan", ...) ==> 0 (Success)
xscreensaver: 20:56:05: pam_set_item (p, PAM_TTY, ":0.0") ==> 0 (Success)
xscreensaver: 20:56:05: PAM ECHO_OFF("Password: ") ==> password
xscreensaver: 20:56:05: pam_authenticate (...) ==> 0 (Success)
xscreensaver: 20:56:05: pam_acct_mgmt (...) ==> 9 (Authentication service cannot retrieve authentication info.)
xscreensaver: 20:56:05: pam_setcred (...) ==> 0 (Success)
xscreensaver: 20:56:05: pam_end (...) ==> 0 (Success)
xscreensaver: 20:56:05: password correct.
</pre>
So we've got the first attempt with {{cmd|pam_bioapi|}}, which fails immediately (no sign of the GUI fingerprint prompt, nor a "silent" chance to swipe the finger as with xdm), then the fallback to {{cmd|pam_unix|}} which succeeds. Earlier I had xscreensaver set up to only try {{cmd|pam_bioapi|}}, with essentially the same result -- it gives up on pam entirely and does unix auth itself.

I'd really like to strace the pam module and see what it's attempting to do to {{path|/proc/bus/usb|}}, but as that actually fixes the problem I'm kinda at a loss. Maybe there's some kernel option to print debugging info for usbfs? I'd be all for changing the article to suggest using mount options in {{path|/etc/fstab|}}, if it weren't for this one weird bug. Has anyone else had the same problem?

-- [[User:keegan|keegan]]

Same here, I had the whole setup workin flawlessly (I really need to get that 'never-touch-a-running-system' mantra burnt into the back of my hands), but after a fresh install of the same distro (Ubuntu) and following the same procedure to get things working i get exactly this behaviour. Login works (now even with multifinger, although there are other issues with that), I can use test_verify-pam_bioapi as a user. and the stock xscreensaver works, albeit only after entering a bogus password first.
The patched xscreensaver works when run within a strace (Now that sucks) but fails otherwise. And as i said before, I had this working...

----
<pre>
open("/dev/bus/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 13
fstat64(13, {st_mode=S_IFDIR|0755, st_size=140, ...}) = 0
fcntl64(13, F_SETFD, FD_CLOEXEC) = 0
getdents64(13, /* 7 entries */, 4096) = 168
getdents64(13, /* 0 entries */, 4096) = 0
close(13) = 0
open("/dev/bus/usb/003", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 13
fstat64(13, {st_mode=S_IFDIR|0755, st_size=80, ...}) = 0
fcntl64(13, F_SETFD, FD_CLOEXEC) = 0
getdents64(13, /* 4 entries */, 4096) = 96
open("/dev/bus/usb/003/002", O_RDWR) = -1 EACCES (Permission denied)
open("/dev/bus/usb/003/002", O_RDONLY) = 14
ioctl(14, USBDEVFS_CONNECTINFO, 0xafd5bd34) = -1 EPERM (Operation not permitted)
read(14, "\22\1\0\1\0\0\0\10\203\4\26 \1\0\1\2\0\1", 18) = 18
read(14, "\t\2\'\0\1\1\0\240", 8) = 8
read(14, "2\t\4\0\0\3\377\0\0\0\7\5\201\2@\0\0\7\5\2\2@\0\0\7\5\203"..., 31) = 31
close(14) = 0
</pre>

Here is all the excitement from the strace on xscreensaver. As I originally thought, you cannot get away with just playing with the proc entries :P You also need to deal with the counterpart in /dev. We can wrap up all the permissions issues with a single UDEV rule:

<pre>
# fingerprint fun
BUS=="usb", DRIVER=="usb", SYSFS{product}=="Biometric Coprocessor", GROUP="bioapi", SYMLINK="misc/fingerprint", RUN+="/bin/sh -c 'chgrp bioapi /proc/$RESULT; chmod g+rw /proc/$RESULT'"
</pre>

I created a 'bioapi' group and configured pam to add groups to anyone logging in ''locally''. Now all you need to do is amend the pam configuraion files below. We use 'wdm', but of course its as applicable for all those resource hungry touchy-feely gdm/kdm folk out there too ;)

/etc/security/group.conf
<pre>
# local group settings
login; tty*; *; al0000-2400; audio,floppy,video,cdrom,nvram,plugdev,bioapi
wdm; :*; *; al0000-2400; audio,floppy,video,cdrom,nvram,plugdev,bioapi
</pre>

/etc/pam.d/login
<pre>
[snipped]

# group *has* to go here
auth optional pam_group.so

# fingerprint action
auth sufficient /usr/local/lib/security/pam_bioapi.so {5550454b-2054-464d-2f45-535320425350} /etc/bioapi1.10/pam/

# Standard Un*x authentication.
@include common-auth

# This allows certain extra groups to be granted to a user
# based on things like time of day, tty, service, and user.
# Please edit /etc/security/group.conf to fit your needs
# (Replaces the `CONSOLE_GROUPS' option in login.defs)
#auth optional pam_group.so

[snipped]
</pre>

/etc/pam.d/wdm
<pre>
#%PAM-1.0
auth required pam_nologin.so
auth required pam_env.so

# local tweak
auth optional pam_group.so

# fingerprint action
auth sufficient /usr/local/lib/security/pam_bioapi.so {5550454b-2054-464d-2f45-535320425350} /etc/bioapi1.10/pam/

@include common-auth
@include common-account
@include common-session
</pre>

'''N.B.''' as with all pam related things, the order is important

-- [[User:Jim diGriz|Jim diGriz]]
----

==Driver Expiring!!!==
Don't anyone notice that both betas of the UPEK driver is expiring in
about a month in the new year, Jan 1st 2006? They really mean it!
I set my computer date to next year and get a message "the driver has expired" when using fingerprint reader! This is a grave threat to our computer lifestyle, i.e. for those of us who got it working and use it
daily:)
Is there any workaround other than setting the date back a year when
new year come and wait for new driver? Is there a way to figure out where exactly in the driver it checked the date and how? The must have set it
somewhere in file libtfmessbsp.so, but it is binary and I can't figure out how to Reverse Engineer it.

---Jiang

Yes, the beta driver will expire. The final version (which is due REALLY soon now) will not.

Sumedha

Any news? Just 9 days left to expiry. --[[User:Thinker|Thinker]] 21:36, 22 Dec 2005 (CET)

The final is out, get it at [http://www.upek.com/support/dl_linux_bsp.asp UPEK's download page]. And how does one edit the industry watch section of the main page?

--[[User:Spiney|spiney]] 21:39, 22 Dec 2005 (CET)

Ah, great! Both the article page and the driver page it points to are out of date... For the news, just follow the "[[ThinkWiki:News|News]]" link in the main page.

--[[User:Thinker|Thinker]] 21:44, 22 Dec 2005 (CET)

As this is now very soon I've updated the article page to link to the final driver, which is better in a few ways anyway. This is unless anyone minds (are there any unresolved issues with the final that don't exist in the betas?).

--[[User:Keegan|keegan]] 05:06, 24 Dec 2005 (CET)

== Updated xscreensaver patch ==

I've tried to address some usability issues with the old patch, e.g. that it calls the PAM bioapi module twice before falling back to the normal authentication methods. It can be found on my [http://linux.spiney.org/debian_gnu_linux_on_an_ibm_thinkpad_t43p_fingerprint_reader Fingerprint Reader] page, feedback is very welcome.

--[[User:Spiney|spiney]] 20:36, 22 Dec 2005 (CET)
----

== Fingerprint or password ==

Is there any way to have PAM accept either a password or a finger swipe, right away? Sometimes one is more convenient, sometimes the other, so and it's a lot of trouble to wait for the UPEK scanner prompt and then cancel it in order to reach the password entry.

--[[User:Thinker|Thinker]] 19:27, 24 Dec 2005 (CET)

== KDE screensaver ==

If you get the following in {{path|/var/log/secure}} when you try to unlock the KDE screensaver, it means you forgot to set the USB device permissions.
localhost pam_bioapi[24981]: Unable to load BioAPI BSP with UUID of {5550454b-2054-464d-2f45-535320425350}, BioAPI error #194d.

--[[User:Thinker|Thinker]] 21:21, 24 Dec 2005 (CET)
----

== fingerprint reader in action. ==

small video with fingerprint reader in action with login: http://chao.ch/tmp/mov01302.mpg

--[[User:62.202.35.30|62.202.35.30]] 17:57, 29 Dec 2005 (CET)

==A little feedback...==
...for all the editors of this article:

"[[How to enable the fingerprint reader]] over at ThinkWiki.org is some real exhaustive documentation for getting the fingerprint scanner working on the ThinkPads. There is also a troubleshooting section towards the end that might be very useful to anyone messing around with it.

Thanks to those responsible for taking the time to write up this excellent guide."

Those thanks come from [http://linuxbiometrics.com/modules/news/ LinuxBiometrics.com]

[[User:Wyrfel|Wyrfel]] 01:24, 9 Jan 2006 (CET)
----

==pam_bioapi.so is not linked to libbioapi100.so==
I downloaded the pam_bioapi package and patched the file by following the wiki. However, I got the following result:

~/soft/thinkpad/pam_bioapi-0.2.1/libpam_bioapi/.libs$ ls -la
total 48
drwxr-xr-x 2 louis users 248 2006-01-12 01:18 ./
drwxr-xr-x 4 louis users 312 2006-01-12 01:18 ../
lrwxrwxrwx 1 louis users 16 2006-01-12 01:18 pam_bioapi.la -> ../pam_bioapi.la
-rw-r--r-- 1 louis users 824 2006-01-12 01:18 pam_bioapi.lai
-rw-r--r-- 1 louis users 19716 2006-01-12 01:18 pam_bioapi.o
lrwxrwxrwx 1 louis users 19 2006-01-12 01:18 pam_bioapi.so -> pam_bioapi.so.0.0.0*
lrwxrwxrwx 1 louis users 19 2006-01-12 01:18 pam_bioapi.so.0 -> pam_bioapi.so.0.0.0*
-rwxr-xr-x 1 louis users 21789 2006-01-12 01:18 pam_bioapi.so.0.0.0*

~/soft/thinkpad/pam_bioapi-0.2.1/libpam_bioapi/.libs$ ldd pam_bioapi.so
linux-gate.so.1 => (0xffffe000)
libc.so.6 => /lib/tls/libc.so.6 (0x40025000)
/lib/ld-linux.so.2 (0x80000000)
~/soft/thinkpad/pam_bioapi-0.2.1/libpam_bioapi/.libs$

pam_bioapi.so is NOT linked to libbioapi100.so. The latter is in the ld path:

~/soft/thinkpad/pam_bioapi-0.2.1/libpam_bioapi/.libs$ ldconfig -p |grep bioapi
libtfmessbsp.so (libc6) => /opt/bioapi/lib/libtfmessbsp.so
libpwbsp.so.0 (libc6) => /opt/bioapi/lib/libpwbsp.so.0
libpwbsp.so (libc6) => /opt/bioapi/lib/libpwbsp.so
libmds_util.so.0 (libc6) => /opt/bioapi/lib/libmds_util.so.0
libmds_util.so (libc6) => /opt/bioapi/lib/libmds_util.so
libbioapi100.so.0 (libc6) => /opt/bioapi/lib/libbioapi100.so.0
libbioapi100.so (libc6) => /opt/bioapi/lib/libbioapi100.so
libbioapi_mds300.so.0 (libc6) => /opt/bioapi/lib/libbioapi_mds300.so.0
libbioapi_mds300.so (libc6) => /opt/bioapi/lib/libbioapi_mds300.so
libbioapi_dummy100.so.0 (libc6) => /opt/bioapi/lib/libbioapi_dummy100.so.0
libbioapi_dummy100.so (libc6) => /opt/bioapi/lib/libbioapi_dummy100.so

and the Sample program also works allowing me to enroll and test a fingerprint.

My system is SuSE 10 with the kernel of 2.6.13-15. Any ideas?

Thanks.

--[[User:Tyne|Tyne]] 09:51, 12 Jan 2006 (CET)

==xscreensaver 4.23+fingerprint.patch causes xscreensaver-gl to crash kernel==

I've gotten bioapi and 'Sample' to allow me to enroll my fingerprint, and I've also experienced the 'two logon' issue.

I compiled xscreensaver 4.23 (though it seemed that apt came with 4.24) and applied the patch. My goal was to have the fingerprint prompt come up and to see the "bad image" of the fingerprint scan.

The first time I did this, xscreensaver-gl took a dump and was causing kernel crashes. So I went and got the newest xscreensaver source and patches, and applied the bioapi patch to those. It worked (meaning it didnt crash the kernel anymore ;b )

It would seem that there is a /etc/pam.d/xscreensaver, so I commented everything out of that except the bioapi line.

Locking xscreensaver, then attempting to unlock didnt show me any fingerprint requirements, and my password didnt work.

I'm wondering if theres something that was left out of the xscreensaver howto? or if theres anyone out there who's gotten the xscreensaver portion of this to work, who would be willing to help me out :)

--[[User:Viss|Viss]] 11:15am, 5 Feb 2006 (PST)

== gdm hangs on kde logout ==

Hi.

I am using a Thinkpad t43, installed with gentoo.
I run gdm as the login manager, with kde 3.4 and enlightenment dr16 as the window manager.

I followed the steps in the wiki, and the biometric scanner is now working fine, appart from the fact that when I close/end the session I just get a blank screen, in place of the gdm login screen.

Disabling the biometrics (by setting the pam.d file back to their originals), the session ends fine. I do this for a few times, and then set the biometrics back again, and it work fine for a few logouts, and then back to the blank screen again.

I can do ctrl+shift+f1 to get to a console window and from there I can issue a shutdown.
Although this works ok, it is a bit of a pain.

Any ideas ?

== 'gksudo' Doesn't show biopam finger swipe prompt... ==

Hey all,

First off... this is an excellent how-to! I have no real interest in using fingerprint scanner with xscreensaver, but it was up and working with everything else on my system pretty much effortlessly.

I'm running Ubuntu Breezy Badger 5.10 on an IBM T43p (2678) and have run into two oddities:
1) /etc/pam.d/xscreensaver - as it is initially configured, if you have an xscreensaver session set to require password (or xlock with screensaver) then you get prompted for the normal text-password entry and then will be prompted to swipe your finger... This is easily fixed by commenting out the '@include common-auth' line in /etc/pam.d/xscreensaver and adding the line 'auth required pam_unix.so nullok_secure'. After that change it only prompts for the text-password entry challenge.

2) gksudo - This is more of a pain... I can use the fingerprint scanner with gksudo, but gksudo doesn't prompt with the (ugly-but-functional) finger swipe dialog the way that gdm does during login or xscreensaver does when configured as mentioned above (pre-fix). So, if I start a Gnome app launcher that is prepended with gksudo, nothing appears to happen until I swipe my finger and then the app gets launched. That's cool and all, but there are times (esp. when multi-tasking) when I forget to swipe and then go "what happened to xxxxx? oh yeah..."

Anyway... does anyone have an idea of what I can do to get the dialog to appear?

thanx

--[[User:JELaVallee|JELaVallee]] 05:56, 20 February 2006 (CET)

The gksudo problem is a restriction from the X server. It doesn't allow to grab the display for other users than the logged-in one. And the pam_bioapi is invoked as root.

--[[User:Whoopie|Whoopie]] 13:10, 20 February 2006 (CET)

That makes sense... so, now I have to wonder, is there a patchable work-around like the xscreensaver one that could allow for this to work? Where should I research such? gksu's project or is this more an issue at the X11-level?

--[[User:JELaVallee|JELaVallee]] 19:38, 27 February 2006 (CET)

I got it working. Grab out the newer pam-bioapi from CVS (http://savannah.nongnu.org/cvs/?group=pam-bioapi). This version supports "multi-finger" when using the sqlite3 database. And it supports defining the used display.
Change your line in your /etc/pam.d/ files like this:

auth sufficient pam_bioapi.so {5550454b-2054-464d-2f45-535320425350} /etc/bioapi/pam/bioshadow.db :0

--[[User:Whoopie|Whoopie]] 14:27, 1 March 2006 (CET)

Very cool... Did you run into any issues rebuilding/installing this? I'll give it a shot this evening... THANKS!

--[[User:JELaVallee|JELaVallee]] 21:07, 1 March 2006 (CET)

Invoke 'xhost +local:' should be able to let gksudo work. Or just blindly sweap the finger. ;)

--[[User:YChao|YChao]] 21:25, 7 March 2006 (CET)

Where do I have to put 'xhost +local:'?

== Multifinger ==

Wow, theres a new version of pam_bioapi which supports multifinger enrollment and user identification.
I'll break my system with that this evening :)

Yes, but I'm searching the patch for xdm. The download page from Josef Hajas (http://nax.hn.org/pub/bioapi/) is down. Does anybody have it?

Update: The patch can be found here: http://www.qrivy.net/~michael/blua/xdm_bio.patch

--[[User:Whoopie|Whoopie]] 17:43, 1 March 2006 (CET)

Tried the newest pam-bioapi from CVS (http://savannah.nongnu.org/cvs/?group=pam-bioapi) on FC3. Failed on enrolling fingerprints: ({{path|/var/log/secure|}})

<code>Mar 9 15:30:40 localhost pam_bioapi[32407]: Can't open database: library routine called out of
sequence</code>

Could anyone help?

--[[User:Ychao|Ychao]] 00:38, 10 March 2006 (CET)

I don't know how to solve it. It seems to be a problem with sqlite3. Which version do you use? Under Ubuntu Breezy, it's 3.2.1.

--[[User:Whoopie|Whoopie]] 12:27, 10 March 2006 (CET)

Did anybody tried multifinger with BioAPI? I am interested in multifinger at all, not only PAM.

Updated:

succesfully installed pam_bioapi with multifinger support, some info:

use: <code>auth sufficient pam_bioapi.so {5550454b-2054-464d-2f45-535320425350} /etc/bioapi/pam/bioshadow.db :0</code> in pam.d, the bioshadow column is path to bioapi sqlite database.

if authentication doesn't work, edit /etc/syslog.conf and write line *.alert /var/log/syslog, so you see pam_bioapi messages in /var/log/syslog
most common error is missing biodata table, newest pam_bioapi version should create it automatically, but if it doesn't, go to /etc/bioapi/pam/ and run command <code>sqlite3 bioshadow.db</code>, then insert this:

<code>CREATE TABLE biodata (id INTEGER PRIMARY KEY,uid INTEGER,uuid TEXT,header BLOB,data BLOB,signature BLOB,type INTEGER,other BLOB);</code>

you must then enroll at least one fingerprint to the database, do it using test_enroll-pam_bioapi from pam_bioapi distribution. note that you must have root user enrolled in order to use <code>su</code> command.

--[[User:MeBa|MeBa]] 16:58, 22 March 2006 (CET)

== GNOME Screensaver support ==

Did anybody try to port the xscreensaver patch to gnome-screensaver? Since Ubuntu Dapper will be shiped with it, it would be nice to have it working then with the fingerprint reader.

Update: Initial support can be found in gnome-screensaver CVS. See [http://bugzilla.gnome.org/show_bug.cgi?id=338635 bugreport].

--[[User:Whoopie|Whoopie]] 12:36, 16 March 2006 (CET)

I'm just working on changes in pam_bioapi which makes gui callbacks from gnome-screensaver possible. But first I have to debug BioAPI error #194d after hibernation because gnome-screensaver is one of the applications returning this error.

--[[User:Nax|nax]] 23:59, 9 July 2006 (CEST)

== No sources for bioapi 1.2.3 ==

There doesn't seem to be any sources available for the recommended Debian package bioapi-1.2.3. That's rather distressing since this is security-related software. A google search doesn't seem to be turning up anything, either. Anybody have a lead on where to find sources?

--[[User:TedTso|TedTso]] 7:47, 29 Apri 2006 (EDT)

== Strange issue on GDM login ==

I successfully have the fingerprint reader running. Everything is working nicely, except when I try to login with GDM for the first time. The login seems to work fine (the PAM_BIOAPI seems to return true) but GDM hangs then. This issue does not occur when I already logged in using password and logged out again or if I kill GDM when it hangs after the first attempt. Anyone an idea on this?

--[[User:Dotxp|dotxp]] 22:54, 2 May 2006 (CEST)

== Don't ask for finger scan when lid closed ==

When using an external CRT+keyboard+mouse with the LD lid closed, it's quiet annoying to have to reach over and open the lid in order to do a finger scan.
Any idea how to make PAM use the fingerprint reader when the lid is open, but skip it when the lid is closed?

--[[User:Thinker|Thinker]] 13:30, 7 May 2006 (CEST)

I edited my /etc/gdm/Init/Default script in a way, that it changes /etc/pam.d/common-auth depending on the lid state: When the lid is closed, the file is replaced by a version without the lines for the finterprint reader, and of course the opposite action when the lid is open.

--[[User:Aerials|Aerials]] 15:52, 9 July 2006 (CEST)
----

== Unable to initialize Bioapi framework, BioAPI error #:3 ==

I see some other discussion on this page about the dreaded "Unable to initialize Bioapi framework, BioAPI error #:3" error, but the only solution i can see seems really complicated -- adding users to groups when they log in, etc. Is that really the simplest way to make xscreensaver work? I'm the only user of my laptop -- the only account who will ever log in, the only fingerprint in the database, the only person who will ever run xscreensaver. Is there some quick easy way to make xscreensaver unlock when i swipe my finger?

-- [[User:Mike Schiraldi|Mike Schiraldi]] 19:52, 16 May 2006 (CEST)

== Security level ==

[http://www.upek.com/support/pdf/BioAPI_PerfectMatchBSP1.7.pdf UPEK PerfectMatch Algorithm]
According to this link, highest security level is 0 which is opposite to 5 mentioned in the article. What is correct?

Update: Well,TFMESS_BSP_LIN.pdf, i downloaded somewhere stated 5 as highest security level. So, ?

== How good is it? ==

How strong is the security that results? Is it actually as good as, say, a 10-character password, or is it the sort of thing you can fool
with some gelatin and a used glass? My inclination is not to trust it - but perhaps someone more knowledgeable would care to comment?
-- [[User:RichardNeill|RichardNeill]] 16:58, 25 July 2006 (CEST)

== Patch for new versions of xdm ==

I was having some trouble getting the xdm patch to work using the version of xdm in Debian unstable (1.0.5). Turns out that xdm now checks for blank username and doesn't even bother to call pam. Here's an updated version of the patch that works for me: [http://www.ugcs.caltech.edu/~q/code/xdm_bio-1.0.5.patch]

[[User:Virtualphtn|Virtualphtn]] 02:40, 16 September 2006 (CEST)

== Using instructions with OpenSuSE 10.1 ==

Now, as OpenSuSE has the problem with the gcc4 I followed the (by the way not very detailed) instructions about patching it. I've done the first patch before installing the BioApi($ wget http://upir.cz/linux/patches/bioapi-1.2.2-gcc4.patch
$ patch -p1 < bioapi-1.2.2-gcc4.patch) but it didn't work(dal_classes.h:460: error: extra qualification 'DAL_DATABASE_INFO_LIST::' on member 'GetDBNamesAndParameters')
Can somebody help me?
--[[User:SQLMosquito|SQLMosquito]] 19:53, 29 September 2006 (CEST)

I've been having the same problem for quite a while. Though when using the script found here http://www.cryptosecurity.net/Suse_T60_DRAFT.htm (based on the thinkwikiscript) things worked just fine. Don't ask me why, I really tried everything I know to be able to build it by myself. Anyway, it works good now.
--[[User:Stooofer|Stooofer]] 00:12, 8 January 2007 (CET)

== 64-bit architecture/OSS release ==

Hi,

To all ThinkWiki contributors: Thanks for all the help so far! I've made a lot of progress, but I have a show-stopper for the fingerprint reader. I'm not using x86 architecture! I am using the (new) Thinkpad X60, which just got upgraded to the Core 2 Duo with EM64T support a couple of weeks ago (along with a ton of other upgrades to the product, without changing its name...........!) So consequently I have Fedora Core 6 x86_64 installed. Works great, in general - standby, trackpoint, special buttons, nvram, and wifi supported (although not all out of the box; the ipw3945 driver had to be downloaded from atrpms.)

The distributed shared library provided by the vendor doesn't link against any 64-bit programs, because it's a 32-bit library. Of course, my desktop manager, PAM, etc. are all 64-bit. Without "downgrading" to a 32-bit distro, is there any way to either hack around this, or to bring up Pavel Machek's open-source enrollment program (thinkfinger) up to the vendor's driver's level of integration with BioAPI? Sounds like some development work, but I'm willing to help any way I can!

There should be a way to get this moving - either using a wrapper a la nspluginwrapper to enable an interface to the 32-bit driver on another architecture, or building upwards from Pavel's small test program.

Thanks!

Sean

Maintenance

2006-12-10T12:07:21Z

Stooofer: /* External Sources */

{| width="100%"
|style="vertical-align:top;padding-right:20px;width:10px;white-space:nowrap;" | __TOC__
|style="vertical-align:top" |
Here you can find general hints about keeping your ThinkPad in good shape. Look at your [[:Category:Models|models category page]] for IBMs official maintenance guide for that model.
|}
==Battery treatment==
{| border=1 cellspacing=0 cellpadding=2 style="vertical-align:top;"
|+Battery life expanding guide
|- style="background:#efefef;white-space:nowrap;"
! style="background:#ffdead;" | Battery Type !! NiCd !! NiMH !! Lithium ion
|- style="vertical-align:top;"
! style="background:#ffdead;" | General
|
*always do complete discharge/charge cycles
*avoid exposing the battery (or notebook) to excessive heat
|
*always do complete discharge/charge cycles
*avoid exposing the battery (or notebook) to excessive heat
|
*never completely discharge the battery, partial dis-/recharges are better
*remove battery when on AC
*avoid exposing the battery (or notebook) to excessive heat
|- style="vertical-align:top;"
! style="background:#ffdead;" | Charging
|
*discharge before charging
|
*discharge before charging
|
*avoid charging if battery is nearly full
*keep notebook off while charging
*fully discharge battery every 30 or so charges to recalibrate fuel guage
|- style="vertical-align:top;"
! style="background:#ffdead;" | Storage
|
*almost discharged
*cool and dry
|
*almost discharged
*cool and dry
|
*never fully charged or discharged, ideally at about 40%
*cool and dry, but '''do not freeze''' them. 10-15C is recommended
|}

===Battery health===
Batteries, especially of the modern Li-Ion type, wear out quicker when they hold a large charge or are subject to higher temperatures (see above).

If you use your laptop at a desk, reduce battery wear by maintaining an appropriate charge level. When possible, remove Li-ion batteries while operating from AC as the notebook gets hot enough inside for that to damage the battery in the long run, even if charging is stopped.

On recent ThinkPads, charging thresholds can be configured in the bundled software. Under Linux, this is supported on recent models by the [[tp_smapi]] driver (and even without <tt>tp_smapi</tt>, if you have a dual-boot setup, you can set the thresholds under Windows and they will be remembered as long as you don't power off your machine with AC disconnected; suspend to RAM is OK). Have a look at [[How to use UltraBay batteries]].

If you have spare Li-ion battery packs, store them at 40% charge in a cool place (15C being a recommended temperature, do not let the batteries freeze). If storing inside a refrigerator, beware of humidity, and be careful with cold spots that can easily freeze the battery if anything goes wrong.

===The problem with 600 series batteries===
ThinkPad 600 power management causes batteries to die before they should. Read more about this on the [[Problem with ThinkPad 600 batteries|associated problem page]].

===Reviving batteries===
Some people experience sudden drops in their batteries capacity.

A way to get these batteries back to full capacity is to run the "Battery Rundown" function of IBMs "PC Doctor for DOS".
The program is downloadable from IBMs support site as three floppy disk images. For those who do not have a floppy, David Smith prepared a [http://www.mypchelp.com/~dsmith/ibmutil/ibm_t22_pcdiag.iso bootable CD image] from the T22 floppy images. For newer ThinkPads there is an official [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222 bootable CD image].

===See also===
* [[Battery safety]]

===External sources===
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-50944 IBM Support - Extending battery life]
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-51038 IBM Support - Battery troubleshooting]
* [http://www.pc.ibm.com/ww/thinkpad/batterylife/ IBM Benchmark]
* [http://batteryuniversity.com Battery University]
* [http://www.batteryuniversity.com/parttwo-34.htm BatteryUniversitys info about prolonging lithium ion batteries]
* [http://www.buchmann.ca/Chap10-page6.asp prolonging lithium ion batteries in Buchmanns Battery FAQ]

==Cleaning the Display==
If you discover markings that look like they originate from the TrackPoint or keyboard, or for information on how to avoid these, look at [[Problem with key and trackpoint markings on the display|this page]].

===External Sources===
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4A2P54 Lenovo Support - LCD care and cleaning instructions]
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-52190 IBM Support - System cleaning instructions]

==Cleaning the Interior==
{{WARN|The following instructions are not appropriate for all ThinkPad models. Please consult the hardware maintenance guide or on-line disassembly instructions for your model.}}
Most ThinkPad models (particularly the A-series and the T-series) tend to accumulate a lot of interior dust which they draw from their ventilation fan. A good dusting every few months is advised. The procedure is as follows.

===ThinkPad T4x series===
See IBM's keyboard removal [http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46515 instructions] and [http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-50227 movie].

===ThinkPad T6x series===
See IBM's keyboard removal
[http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62800 instructions] and
[http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63912 movie].

===Other models (which?)===
#Unplug the computer.
#Remove the battery.
#Turn the ThinkPad over and find two to three screws with upraised double-arrows pointing to them.
#Unscrew these screws and set them aside.
#Press the silver area underneath where the battery used to be. The front of the keyboard will pop up.
#Turn the ThinkPad right side up and gently remove the keyboard, pulling it toward you.
#There is one connector between the ThinkPad and the keyboard. Disconnect it, and set the keyboard aside.
#If there is a small black plastic separator under the keyboard, remove it and set it aside.
#The fan should be visible in the upper left. That entire area will likely be dusty. With a can of compressed air (and ''only'' with a can of compressed air), dust that area and the surrounding area.
#Replace the small black plastic separator, then reconnect the keyboard.
#Slide the keyboard back into place, then press down on the Fn and right-arrow keys until it pops into place.
#Replace the keyboard screws and battery.

==Dealing with spilling accidents==
#Don't panic.
#Don't flip or tilt the computer to prevent the liquid from spreading all over the inside of the case.
#Shut down the OS and turn off the power:
##Unplug the computer.
##Remove the battery.
#Tilt the computer so that everything that leaked into the case can flow out the same way.
#Allow the computer to dry before switching it on again.
#For minor accidents this might already be sufficient. For major flooding you should either bring the computer to a dealer who knows how to open and clean it from inside. Or you can read the Hardware Maintenance Manual, open, clean, and dry the computer yourself.

See also [http://www.moneysense.ca/spending/technology/columnist.jsp?content=986628 Act quickly, carefully if you spill on laptops] on MoneySense.ca (link broken as of 2006-09-18, the article is still available via [http://web.archive.org/web/20050221034011/http://www.moneysense.ca/spending/technology/columnist.jsp?content=986628 web.archive.org]).

==Harddisk Backup / Upgrade==
*[[How to copy a Linux installation]]
*[[Harddrive Upgrade|How to upgrade your Thinkpad hard drive]]
*[[How to copy a Windows installation]]
===External Sources===
*[http://gamma.nic.fi/~point/win2copy.htm Guide on copying Windows 2000/XP to another partition]

==Recovering BIOS passwords==
Password recovery procedure for IBM ThinkPads
using R24RF08 and IBMpass

'''1. Introduction.'''

The IBM ThinkPad uses a small eeprom ([[AT24RF08|ATMEL 24RF08]]) to store different OEM
issues like serial number, UUID, etc. The supervisor password (SVP) is also stored in this eeprom.
The 24RF08 is not an ordinary eeprom: it features read protection, which the BIOS uses to lock down
access to the eeprom contents. Also, the password is written in a special scan code, which needs to
be translated to ASCII to be of any use.

To recover the password, one can use two different programs: R24RF08 (eeprom reader) and IBMpass
(password revealer) available at [http://www.allservice.ro http://www.allservice.ro]. Diagrams are included in the reader kit.

Models for which R24RF08 and IBMpass are enough to recover the password: 240, 240X, 390E, 390X, 570, 570E,
600e, 600X, 770Z, A20m, A21e, A21m, a22m, A30, A30p, A31, A31p, G40, G41, R30, R31, R32, R40, R50, R51,
Transnote, T20, T21, T22, T23, T30, T40, T40p, T41, T41p, T42, T42p, X20, X21, X22, X23, X24, X30, X31, X40, X41.

ThinkPads featuring TPCA technology (i.e. a [[Tpm|TPM trusted platform module chip]]), especially T4x, X3x, X4x need the W24RF08 eeprom writer program to complete the password recovery procedure, if the passphrase function is enabled in BIOS setup.

Other models such as the 380XD or 600 use 24C01 or 93C46 eeproms, which can be read without special tools.
The method is the same like for the models based on 24RF08, only the software to dump the eeprom is different.

Newer T43/T43p, R52, T60 and Z60 ThinkPads can be unlocked using PC8394 programming tools that consist in RPC8394 and WPC8394 (reader and writer for TPM chips). The software is available as well on [http://www.allservice.ro http://www.allservice.ro]. IBMpass 2.0 works for any TP model without exceptions.

'''2. Locating the ATMEL 24RF08 eeprom. Soldering.'''

No need to unsolder the 24RF08 eeprom, just solder 3 wires to SDA, SCL and GND pins of the
eeprom. There are two eeprom layouts (see interface schematics described bellow), orresponding to 8 pin or 14 pin eeproms. Locate the eeprom first according to your model (E.g. T20-23 and T30 have the eeprom underneath TP, and can be accessed by removing the RAM modules cover, no need to dismantle the laptop.) and solder the wires using a soldering iron with a fine tip. Also, you can use 0.15 -0.20 mm enamel coated wires or similar small diameter insulated wires. These wires will be connected later to the interface.
Tip: You can use clips to connect the wires or you can solder on the PCB traces leading to the
eeprom pins. Once again, be careful and double, triple check the soldering if necessary till you are positively sure you have done the right job.

'''3. Choose and build the interface.'''

Since version 2.0, R24RF08 and W24RF08(eeprom writer) are compatible with a wide range of eeprom programmers. By default, both programs set the COM port signals to use direct logic level to access I2C bus. We provide here 2 schematics that are relevant for direct logic signals and for inverse logic signals (simple-i2cprog.pdf and driven-i2cprog.pdf). Also, depending of the interface you build, you can invert the logics for SDA-In, SDA-Out, and SCL COM port signals by some command line parameters described later in this document.
a) The file simple-i2cprog.pdf contains the schematic diagram of a simple interface (known as SIPROG)based on 2 zeners and 2 resistors. This is a classic, easy to build circuit and works with soldered or unsoldered eeproms. The purpose of the 2 zeners is to convert RS232 levels (+/- 5V) to TTL levels, needed by the eeprom. It uses direct logic signals to I2C eeprom and is powered by the COM port. However, this interface works with in-system eeproms but is dependant on COM port current and eeprom bus impedance. R24RF08 works natively with this circuit, no need to change the lines signals with command line parameters. This circuit works pretty well with almost all ThinkPads series.
b) The second interface is described in driven-i2cprog.pdf. The circuit uses MAX 232 as a RS232 to TTL driver and its main purpose is to work with soldered eeproms. The advantage of MAX232 is the TTL outputs that are more reliable and more powerful when work with soldered, in-system eeproms (dependency free from the COM port current). Due of the internal inverters of MAX232 the interface responds to an inverse signal logic level. R24RF08 needs /x, /d, /i switches to be specified in the command line.

What these switches mean:
/x - invert serial clock, also known as SCL;
/d - invert serial data output, also known as SDA-Out;
/i - invert serial data input, also known as SDA-In.
All those can be used in any combination to meet any interface specification.

'''4. How is it working:'''

Prepare your technician PC by connecting the interface to the COM1 port (donâ€™t connect the wires to eeprom yet). Turn on the ThinkPad and press F1 to enter BIOS Setup. When you are prompted for the password and thereâ€™s no other activity like HDD access or so, connect the wires (GND first!, SDA, SCL) to the corresponding wires from the interface (attached before to COM1) and execute R24RF08:

-for SI-PROG interface (as described in 3.a above):
r24rf08.exe <filename.ext>. where filename.ext is the file where eeprom content will be stored.
Example: r24rf08 mytp.bin

-for MAX232 driven I2C interface (as described in 3.b above):
r24rf08.exe <filename.ext> /x /d /i. where /x /d /i are command line parameters (switches) for this kind of interface.
Example: r24rf08 mytp2.bin /x /d /i

Use exactly the instructed switches to avoid possible damages to your eeprom data!
The file should be created in the same folder. Finally, disconnect the wires (GND last!) and turn off the ThinkPad by pressing on/off switch.

'''5. Reveal the password.'''

Now, you have the .bin file but you need to dump in scan code to retrieve the password. IBMpass 2.0 Lite is a free tool that will do the job. Just open the eeprom dump youâ€™ve created before and search for 0x330, 0x340 lines. The password is located on 0x338 (and 0x340 depending on model) in scan code. For 24C01 eeproms the password is located at 0x38, 0x40. If the password won't work for the very first time then your eeprom may use newer IBM scancodes. In this case switch to alternate scan codes to find it. For those who want quick answers the recommended version is IBMpass 1.1. Usage for IBMpass 1.1 (command line only):

ibmpass mytp.bin â€“ use â€œ/aâ€ switch to see in alternate scan code if needed:
ibmpass mytp.bin /a

For some old models like 570 or 770Z you need to execute the eeprom patcher first. This will reset the read protection on the password offset. To do that just execute patcher.exe before the reading operation, without rebooting the laptop:

-for SI-PROG:
patcher.exe , then immediately
r24rf08.exe <filename.ext>

-for Driven-I2C (Max232) you must insert the switches:
patcher.exe /x /d /i, then immediately
r24rf08.exe <filename.ext> /x /d /i

W24RF08, the writer version, has included the complete APP reset operation you donâ€™t need to use patcher.

Moreover, there are a new encrypting algos used with some new security chips (AT97SC3201, AT97SC3203) that are very secured. The password is not in scancode and in some cases not even in the eeprom. To unlock the machine, the dump should suffer some changes and the eeprom must be reprogrammed using W24RF08. This operation works for all IBM TCG/TCPA secured laptops w/o exceptions.

Remember, use 3 wires from the interface and 3 wires from eeprom! Connect them after your
ThinkPad is powered and disconnect them right after you read the content, before you switch off the laptop.

===External Sources===
* [http://www.allservice.ro R24RF08/W24RF08, PC8394 programming tools & IBMpass author's webpage.]
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-59377 IBM Support - Lost or forgotten password]
* [http://www.allservice.ro/forum/viewforum.php?f=12 Full Service of all ThinkPad models including free password recovery]

Talk:Installing SuSE 10.1 on a ThinkPad T60

2006-10-25T14:44:51Z

Stooofer:

What did I do wrong installing my Suse? I'm running Suse 10.1 (Gnome Desktop) on the T60 and cannot get either suspend to RAM nor suspend to disk working.
Suspend to disk usually freeze after a message like snd-hda-suspend bus=dda9cc80 state=0x1

--[[User:Stooofer|Stooofer]] 16:44, 25 October 2006 (CEST)

Table of thinkpad-acpi LEDs

2006-10-24T13:10:31Z

Stooofer:

This table contains informations about which LED number is used for which LED in the [[ibm-acpi]] driver.

To test please do the following and add the blinking LED to the table.

<pre>
echo "0 blink" > /proc/acpi/ibm/led
echo "1 blink" > /proc/acpi/ibm/led
echo "2 blink" > /proc/acpi/ibm/led
echo "3 blink" > /proc/acpi/ibm/led
echo "4 blink" > /proc/acpi/ibm/led
echo "5 blink" > /proc/acpi/ibm/led
echo "6 blink" > /proc/acpi/ibm/led
echo "7 blink" > /proc/acpi/ibm/led
echo "on" > /proc/acpi/ibm/light
</pre>

<div style="font-size: 92%">
{| border="1" cellspacing="0" cellpadding="2"
|+ibm-acpi LED table
|-
! ×
! LED #0
! LED #1
! LED #2
! LED #3
! LED #4
! LED #5
! LED #6
! LED #7
! ThinkLight
! Notes
|-
! colspan=11 style="text-align:center;background:#efefef;" |
|-
! {{A22p}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{A30}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! colspan=11 style="text-align:center;background:#efefef;" |
|-
! {{G41}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! colspan=11 style="text-align:center;background:#efefef;" |
|-
! [[:Category:R31|R31]]
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{R40}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{R50}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{R50p}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{R50e}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || Amber ||
|-
! {{R51}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || Amber || 2883-ELU
|-
! {{R52}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || Amber ||
|-
! {{R60}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || Amber ||
|-

! colspan=11 style="text-align:center;background:#efefef;" |

|-
! {{T20}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{T22}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{T23}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{T30}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{T40}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{T40p}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || White ||
|-
! {{T41}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || White || 2373-2gg
|-
! {{T41p}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{T42}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || White ||
|-
! {{T42p}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{T43}}, {{T43p}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || White ||
|-
! {{T60}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || White || 2007-49G
|-
! colspan=11 style="text-align:center;background:#efefef;" |

|-
! {{X20}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{X24}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{X31}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{X32}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{X40}}
| Power || Battery (amber) || Battery (green) || Ultrabase || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || {{Cunk}} ||
|-
! {{X41}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{X60}}
| Power || Battery (amber) || Battery (green) || Ultrabase || Ultrabay || {{Cunk}} || {{Cunk}} || Standby || {{Cunk}} ||
|-
! colspan=11 style="text-align:center;background:#efefef;" |

|-
! {{Z60t}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} ||
|-
! {{Z61m}}
| Power || Battery (amber) || Battery (green) || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || Standby || Amber ||
</div>

Category:T60

2006-10-17T09:57:05Z

Stooofer: /* Resources */

{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== ThinkPad T60 ===
This pages gives an overview of all ThinkPad T60 related topics.

==== Standard Features ====
* One of the following processors:
** [[Intel Core Duo (Yonah)]] 1.66, 1.83, 2.0, 2.2, 2.33 GHz CPU
** [[Intel Core Solo (Yonah)]] 1.66 GHz CPU
* One of the following graphics adapters:
** [[Intel Graphics Media Accelerator 950]] - only for 1024x768 displays
** [[ATI Mobility Radeon X1300]] (64 MB)
** [[ATI Mobility Radeon X1400]] (128 MB)
** Note: Lenovo claims to only sell 950 adapters on 1024x768 LCDs, they did release a test box with a 1400x1050 display but claim there is a performance issue.
* One of the following displays:
** 14.1" TFT display with 1024x768 resolution
** 14.1" TFT display with 1400x1050 resolution
** 15.0" TFT display with 1024x768 resolution
** 15.0" TFT display with 1400x1050 resolution
** 15.0" TFT display with 1600x1200 resolution
* 512 MB or 1 GB [[PC2-5300]] memory standard upgradable to 4 GB
** Note: Due to the limitation of the current 32-bit PC architecture, actual usable memory size is limited to 3 GB even though the physical installable memory size is 4 GB in ThinkPad T60/T60p computers.
* 40, 60, 80 or 100 GB SATA HDD
* [[AD1981HD]] HD Audio 1.0 controller
* [[Ethernet Controllers#Intel Gigabit (10/100/1000)|Intel Gigabit Ethernet Controller]]
* [[UltraBay|UltraBay Slim]] with one of the following:
** [[UltraBay Slim DVD-ROM Drive]]
** [[UltraBay Slim CD-RW/DVD-ROM Combo II Drive]]
** [[UltraBay Slim Super Multi-Burner Drive]]
* [[MiniPCI Express slot]] 1 with one of the following:
** None (empty)
** [[Intel PRO/Wireless 3945ABG Mini-PCI Express Adapter]]
** [[ThinkPad 11a/b/g Wireless LAN Mini Express Adapter]]
* [[MiniPCI Express slot]] 2 with one of the following:
** None (empty)
** [[Verizon 1xEV-DO WWAN]] (It seems to be a Sierra Wireless MC5720 Modem)
* [[CardBus slot]] (Type 2)
* [[ExpressCard slot|ExpressCard/53 slot]]
* [[Embedded Security Subsystem|IBM Embedded Security Subsystem 2.0]]
* [[Active Protection System|IBM Active Protection System]]
* [[Integrated Fingerprint Reader]] on select models
* Bluetooth
* [[UltraNav]] (TrackPoint / Touchpad combo)
</div>
|style="vertical-align:top" |
[[Image:ThinkPadT60.jpg|ThinkPad T60]]
|}

==== Resources ====
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62733 T60/p Hardware Maintenance Manual]
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62465 T60/p Service and Troubleshooting Guide]

==== Reviews ====
* [http://www.notebookreview.com/default.asp?newsID=2702 NotebookReview.com], 2006-01-05
* [http://www.anandtech.com/mobile/showdoc.aspx?i=2663&p=15 AnandTech], 2006-01-05
* [http://forum.thinkpads.com/viewtopic.php?t=21513&highlight=clean Nottes], 2006-02-25 (links from thinkpads.com; includes pictures of disassembled unit)
* [http://www.pcmag.com/article2/0,1895,1933669,00.asp PCMag.com], 2006-03-06
* [http://www.laptoplogic.com/reviews/detail.php?id=112&part=full&page=1 Laptop Logic], 2006-03-27
* [http://www.notebookjournal.de/tests/104 notebookjournal.de], 2006-04-24 (german, some good pictures)

==== Resources ====
* [http://www.cryptosecurity.net/Suse_T60_DRAFT.htm SUSE 10.1 on the Thinkpad T60], 17-10-2006
* [http://statgen.ncsu.edu/~jdstarme/fc5_on_t60.txt Fedora Core 5 on the Thinkpad T60], 10-09-2006
* [http://vizzzion.org/?id=t60 Running Linux on the Thinkpad T60], 25-05-2006
* [http://www.gtishrine.com/t60.php Installing Gentoo Linux on the Thinkpad T60], 15-06-2006
* [http://ceallaigh.net/log/2006/06/16/ubuntu-dapper-drake-604-on-a-lenovo-t60-thinkpad/ Installing Dapper Drake on the Thinkpad T60], 04-07-2006

[[Category:T Series]]

APM vs. ACPI

2006-09-27T21:11:44Z

Stooofer: /* T Series */

{| width="100%"
|style="vertical-align:top;padding-right:20px;width:10px;white-space:nowrap;" | __TOC__
|style="vertical-align:top" |
The following tables headings shell designate the following meanings...

* APM
** Blank = ability to turn off the LCD while using APM
** Sleep = ability to do a suspend-to-ram using APM
** Hibernate = ability to perform a suspend-to-disk via the BIOS
** Battery = ability to get statistics on remaining battery life from the APM subsystem
*ACPI
** Blank = ability to turn off the LCD while using ACPI
** Sleep = ability to do a suspend-to-ram using ACPI
** Hibernate = ability to perform a suspend-to-disk using ACPI
** Battery = ability to get statistics on remaining battery life from the ACPI subsystem

The fields should be filled with one of the following:
* ? = unknown / untested
* yes = working (with or without extra configuration effort)
* no = not working (because kernel support isn't there yet)
* part = partially working (unsolvable trouble on resume or something like that)
* N/A = not supported by the hardware
* ACPI-Hibernate can additionally have one of these:
** sus - hibernation works using the old in-kernel (2.6) [[swsusp]]
** sus2 - hibernation works using [[Software Suspend 2]]
|}

{| border="1" cellspacing="0" cellpadding="2"
|-
! colspan="9" style="text-align:center;background:#efefef;" |
====Numbered====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:560 | 560]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:570 | 570]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:570E | 570E]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:600 | 600]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:600E | 600E]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:600X | 600X]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CD | 755CD]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CDV | 755CDV]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CV | 755CV]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CX | 755CX]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770 | 770]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770E | 770E]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770X | 770X]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770Z | 770Z]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====A Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A20m | A20m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A20p | A20p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A21e | A21e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A21m | A21m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A21p | A21p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A22e | A22e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A22m | A22m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A22p | A22p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A30 | A30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A30p | A30p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A31 | A31]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A31p | A31p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====G Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:G40 | G40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:G41 | G41]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====R Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R30 | R30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R31 | R31]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R32 | R32]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R40 | R40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R40e | R40e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R50 | R50]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R50e | R50e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R51e | R51e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R50p | R50p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R51 | R51]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R52 | R52]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====T Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T20 | T20]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | [[#t20_hib|yes]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | [[#t20_hib|yes]]
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T21 | T21]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T22 | T22]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T23 | T23]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T30 | T30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T40 | T40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T40p | T40p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T41 | T41]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T41p | T41p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T42 | T42]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T42p | T42p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T43 | T43]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | part
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T43p | T43p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T60 | T60]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====X Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X20 | X20]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X21 | X21]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | random
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y2.6
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X22 | X22]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X23 | X23]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X24 | X24]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X30 | X30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X31 | X31]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X32 | X32]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X40 | X40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X41 | X41]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | part (SATA)
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | part (SATA)
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part (SATA)
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes (sus)
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X41 Tablet | X41 Tablet]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X60 | X60]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X60s | X60s]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====Z Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:Z60m | Z60m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes (sus)
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:Z60t | Z60t]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====Others====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:TransNote | TransNote]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:PC110 | PC110]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
|}

<div id="t20_hib">
<b>T20 Hibernation:</b>
* tested with SuSE 9.2
* APM needs a special file on a windows partition
</div>

APM vs. ACPI

2006-09-27T21:09:43Z

Stooofer: /* T Series */

{| width="100%"
|style="vertical-align:top;padding-right:20px;width:10px;white-space:nowrap;" | __TOC__
|style="vertical-align:top" |
The following tables headings shell designate the following meanings...

* APM
** Blank = ability to turn off the LCD while using APM
** Sleep = ability to do a suspend-to-ram using APM
** Hibernate = ability to perform a suspend-to-disk via the BIOS
** Battery = ability to get statistics on remaining battery life from the APM subsystem
*ACPI
** Blank = ability to turn off the LCD while using ACPI
** Sleep = ability to do a suspend-to-ram using ACPI
** Hibernate = ability to perform a suspend-to-disk using ACPI
** Battery = ability to get statistics on remaining battery life from the ACPI subsystem

The fields should be filled with one of the following:
* ? = unknown / untested
* yes = working (with or without extra configuration effort)
* no = not working (because kernel support isn't there yet)
* part = partially working (unsolvable trouble on resume or something like that)
* N/A = not supported by the hardware
* ACPI-Hibernate can additionally have one of these:
** sus - hibernation works using the old in-kernel (2.6) [[swsusp]]
** sus2 - hibernation works using [[Software Suspend 2]]
|}

{| border="1" cellspacing="0" cellpadding="2"
|-
! colspan="9" style="text-align:center;background:#efefef;" |
====Numbered====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:560 | 560]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:570 | 570]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:570E | 570E]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:600 | 600]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:600E | 600E]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:600X | 600X]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CD | 755CD]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CDV | 755CDV]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CV | 755CV]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:755CX | 755CX]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770 | 770]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770E | 770E]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770X | 770X]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:770Z | 770Z]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====A Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A20m | A20m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A20p | A20p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A21e | A21e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A21m | A21m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A21p | A21p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A22e | A22e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A22m | A22m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A22p | A22p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A30 | A30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A30p | A30p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A31 | A31]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:A31p | A31p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====G Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:G40 | G40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:G41 | G41]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====R Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R30 | R30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R31 | R31]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R32 | R32]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R40 | R40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R40e | R40e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R50 | R50]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R50e | R50e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R51e | R51e]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R50p | R50p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R51 | R51]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:R52 | R52]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====T Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T20 | T20]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | [[#t20_hib|yes]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | [[#t20_hib|yes]]
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T21 | T21]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T22 | T22]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T23 | T23]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T30 | T30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T40 | T40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T40p | T40p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T41 | T41]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T41p | T41p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T42 | T42]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T42p | T42p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T43 | T43]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | part
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T43p | T43p]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:T60 | T60]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====X Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X20 | X20]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X21 | X21]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | random
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y2.6
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X22 | X22]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | y
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X23 | X23]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X24 | X24]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X30 | X30]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | sus2
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X31 | X31]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X32 | X32]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X40 | X40]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X41 | X41]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | part (SATA)
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | part (SATA)
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | no
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | part (SATA)
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes (sus)
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X41 Tablet | X41 Tablet]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X60 | X60]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:X60s | X60s]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====Z Series====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:Z60m | Z60m]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes (sus)
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | Yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:Z60t | Z60t]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
|-
! colspan="9" style="text-align:center;background:#efefef;" |

====Others====
|-
! rowspan=2 style="vertical-align:bottom;background-color:#cfefcf;" | model
! colspan=4 style="vertical-align:top;background-color:#6699cc;" | APM
! colspan=4 style="vertical-align:top;background-color:#fbe030;" | ACPI
|-
! style="vertical-align:top;background-color:#6699cc;" | blank
! style="vertical-align:top;background-color:#6699cc;" | sleep
! style="vertical-align:top;background-color:#6699cc;" | hibernate
! style="vertical-align:top;background-color:#6699cc;" | battery
! style="vertical-align:top;background-color:#fbe030;" | blank
! style="vertical-align:top;background-color:#fbe030;" | sleep
! style="vertical-align:top;background-color:#fbe030;" | hibernate
! style="vertical-align:top;background-color:#fbe030;" | battery
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:TransNote | TransNote]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | ?
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | yes
|-
| style="vertical-align:top;background-color:#e9f9e9;" |
*[[:Category:PC110 | PC110]]
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | no
| style="vertical-align:middle;text-align:center;background-color:#cce5ff;" | yes
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
| style="vertical-align:middle;text-align:center;background-color:#fff0b0;" | N/A
|-
|}

<div id="t20_hib">
<b>T20 Hibernation:</b>
* tested with SuSE 9.2
* APM needs a special file on a windows partition
</div>