<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>https://www.thinkwiki.org/w/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Shadowarts</id>
	<title>ThinkWiki - User contributions [en]</title>
	<link rel="self" type="application/atom+xml" href="https://www.thinkwiki.org/w/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Shadowarts"/>
	<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/wiki/Special:Contributions/Shadowarts"/>
	<updated>2026-05-25T00:49:20Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.31.12</generator>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=AD1984&amp;diff=30756</id>
		<title>AD1984</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=AD1984&amp;diff=30756"/>
		<updated>2007-06-26T13:17:36Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: /* Linux ALSA driver */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;__NOTOC__&lt;br /&gt;
{| width=&amp;quot;100%&amp;quot;&lt;br /&gt;
|style=&amp;quot;vertical-align:top&amp;quot; |&lt;br /&gt;
&amp;lt;div style=&amp;quot;margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;&amp;quot;&amp;gt;&lt;br /&gt;
=== AD1984 ===&lt;br /&gt;
This is a ''Analog Devices'' High-Definition Audio controller&lt;br /&gt;
&lt;br /&gt;
=== Features ===&lt;br /&gt;
* Chipset: AD1984&lt;br /&gt;
* Interface: HD Audio &lt;br /&gt;
&amp;lt;/div&amp;gt;&lt;br /&gt;
|style=&amp;quot;vertical-align:top&amp;quot; |&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
=== Linux ALSA driver ===&lt;br /&gt;
This device isn't supported by current Alsa Driver [http://www.alsa-project.org/alsa-doc/index.php?vendor=vendor-Analog_Devices#matrix] (as of May 25, 2007).&lt;br /&gt;
&lt;br /&gt;
However, Takashi Iwai has added support to this device in Alsa development version [http://hg.alsa-project.org/alsa-kernel/log?rev=AD1984]... Still have to wait to get it included in the Linux Kernel...  (Note: It is rather trivial too get this working in a standard kernel right now, It is only 3 patches on top of the stock 1.0.14 code.)&lt;br /&gt;
&lt;br /&gt;
=== This chip may be found in ===&lt;br /&gt;
* {{R61}}&lt;br /&gt;
* {{T61}}&lt;br /&gt;
&lt;br /&gt;
=== Datasheets ===&lt;br /&gt;
* [http://www.analog.com/en/prod/0,2877,AD1984,00.html Analog Devices page for the AD1984]&lt;br /&gt;
&lt;br /&gt;
[[Category:Components]]&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30755</id>
		<title>Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30755"/>
		<updated>2007-06-26T13:14:42Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: /* '''QUESTIONS!!!''' */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;We'll I got it basically working, so far (will update as i get more thing working).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===SATA Issues===&lt;br /&gt;
At first, the Ubuntu Live CD would not start at all, this seems to be a problem with the SATA AHCI driver.  I had to go into the BIOS and change the SATA driver from ACHI to compatibility (What is the difference? Am I loosing performance?).&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
===NVIDIA Quadro NVS 140M (Solved)===&lt;br /&gt;
After initial issues like those explained above in the SATA Issues, I received the xorg error 'fatal error: no screens found'.  I was able to boot into Safe Graphics Mode and run the installer, though I had to move both window manager bars to see enough of the install window to use it.&lt;br /&gt;
&lt;br /&gt;
Alternatively, you can download the drivers via wget in a console. Take care to follow the instructions in &lt;br /&gt;
[http://www.nvnews.net/vbulletin/showthread.php?t=72490 the NVidia Forum] and uninstall all the packages wit apt-get remove, as descirbed.&lt;br /&gt;
Then run the nvidia installer.&lt;br /&gt;
&lt;br /&gt;
Remember that, after you upgrade the kernel, you also have to re-install the drivers.&lt;br /&gt;
&lt;br /&gt;
=== Intel Graphics Media Accelerator X3100 (Chipset GM965) (Solved)===&lt;br /&gt;
After that the CD seemed to boot but the screen was just garbage [http://shadowarts.nonlogic.org/projects/thinkpad/screen_garbage.jpg Picture].  In order to get around that issue I had to go back and download the Alternate CD, which allows you to install in text only mode.  From here, the text-only install went okay.&lt;br /&gt;
&lt;br /&gt;
When I booted up after the installation, I was still getting the same garbage on the screen.  To resolve this I edited my [http://shadowarts.nonlogic.org/projects/thinkpad/xorg.conf xorg.conf] file as shown.  I also had to install the latest kernel for Feisty, as the one off of the install disk did have have /dev/agpgart.  And I could then use X11.  There were still some issues however.  The screen seemed somewhat fuzzy.  This was a little more challenging of a fix...  I found [http://www.spinics.net/lists/xorg/msg25099.html this] mailing list posting, according to it, there was a small glitch in the driver.  To fix it:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
apt-get install source xserver-xorg-video-intel&lt;br /&gt;
cd xserver-xorg-video-intel-1.9.94/&lt;br /&gt;
vim src/i830_lvds.c&lt;br /&gt;
Goto line 230 and delete (PFIT_ENABLE | VERT_AUTSCALE ....);, replacing it with 0;  then quit vim&lt;br /&gt;
dpkg-buildpackage -rfakeroot -uc -b&lt;br /&gt;
cd ..&lt;br /&gt;
dpkg -i xserver-xorg-video-intel_1.9.94-lubuntu3_amd64.deb (wont be amd64 with a 32-bit install)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Now reboot your computer, and it should work.  **NOTE: For some reason just restarting X didn't fix it, seems like you must reboot.**  At this point you should have a nice, crisp display.&lt;br /&gt;
&lt;br /&gt;
I am still working on aiglx and compiz (switching desktops on a cube doesnt seem to work, though I have some ideas...).  There are some issues with OpenGL apps freezing Xorg as well, but the standard 2D desktop works flawlessly.&lt;br /&gt;
&lt;br /&gt;
===ThinkFinger===&lt;br /&gt;
Ubuntu does not come with a package for thinkfinger.  Downloading the most recent source and building it was simple enough: Download most recent version (0.3 at time of writing)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
tar xvzf thinkfinger-0.3.tar.gz&lt;br /&gt;
cd thinkfinger-0.3/&lt;br /&gt;
./configure --with-securedir=/lib/security --with-birdir=/etc/pam_thinkfinger&lt;br /&gt;
make -j5             (hey its dual core!)&lt;br /&gt;
sudo make install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Configuring it is easy as well, open /etc/pam.d/common-auth:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
auth sufficient pam_thinkfiger.so&lt;br /&gt;
auth required pam_unix.so try_first_pass nullok_secure&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Now just run sudo tf-tool --add-user &amp;lt;username&amp;gt; and it will all be setup.  (I found this somewhere on the web, I wish I could give a source but I'm afraid I cant find it, thank you Anonymous!).&lt;br /&gt;
&lt;br /&gt;
===HDAPS===&lt;br /&gt;
This seems to be working fine now, I just follow the step on [How_to_protect_the_harddisk_through_APS].  Using hdaps-gl does the inverse of the accelerometer, though it's not really a big deal, the harddrive protection should still work.&lt;br /&gt;
&lt;br /&gt;
===Can you hear me now?.... What? (Solved!)===&lt;br /&gt;
After upgrading to 1.0.14 I still had no sound, and this took about a week to solved (though it was so sadly obvious though).  Just upgrading to alsa 1.0.14 will not be enough, there were a few patches released right after the release that fix the Thinkpad's.  The reason I missed this was because it was the same day so the release of 1.0.14!&lt;br /&gt;
&lt;br /&gt;
Anyway download the source code to the alsa-driver and apply these patches: (links to the revisions)&lt;br /&gt;
&lt;br /&gt;
* [http://hg.alsa-project.org/alsa-kernel/rev/958b39f3e8dd Fix Oops with AD1984 thinkpad model]&lt;br /&gt;
* [http://hg.alsa-project.org/alsa-kernel/rev/47ca87407c84 Fix AD1984 basic model]&lt;br /&gt;
* [http://hg.alsa-project.org/alsa-kernel/rev/ca37aeeeb0ea Fix Thinkpad X61/T61 outputs]&lt;br /&gt;
&lt;br /&gt;
After doing a make and make install reboot your computer (or rrmmod snd-hda-intel &amp;amp;&amp;amp; modprobe snd-hda-intel).  And run alsamixer (for me it only works as root atm).  You will have to play with the settings a bit.  Make sure the speaker option is not muted and leave the Internal Mic Boost at 0, other wise you will have a really loud microphone feedback sort of sound constantly.&lt;br /&gt;
&lt;br /&gt;
I had to chmod -R 777 /dev/snd/ to get everything work for now. (THIS IS NOT THE CORRECT WAY TO DO IT, IT WILL NOT STAY BETWEEN REBOOTS!).&lt;br /&gt;
&lt;br /&gt;
Audio playback should then work, audio capture (microphone) doesn't seem to work, but I am probably not going to try and fix it, I don't use the capture so I am not concerned with that at the moment.&lt;br /&gt;
&lt;br /&gt;
==Overall==&lt;br /&gt;
I initially had some big problems getting this working, but now its working quite well.  The wifi card worked at startup (uses madwifi) and I am happy because I don't seem to need any proprietary software to run this system.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=='''QUESTIONS!!!'''==&lt;br /&gt;
'''I think these should be in the discussion section. ~ shadowarts'''&lt;br /&gt;
&lt;br /&gt;
(Sorry if this is not the right way to do this.  This page is incredibly helpful, and I just had a few short questions/clarifications.)&lt;br /&gt;
&lt;br /&gt;
First, did you boot into &amp;quot;Safe Graphics Mode&amp;quot; from LILO or Grub, or from a graphical login screen?  My installation hangs right before the login screen, and all of the virtual screens are blank.  I can log into a recover mode from Grub to get a shell.&lt;br /&gt;
&lt;br /&gt;
Second, if you could add a little bit of detail as to how you installed a new kernel, why agpgart is necessary, and even what part GM965 is, that would be awesome :)&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Talk:Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30754</id>
		<title>Talk:Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Talk:Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30754"/>
		<updated>2007-06-26T13:14:01Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: â†Created page with 'Questions should probably go in here (the discussion section).  I will update this article a bit later today.'&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Questions should probably go in here (the discussion section).  I will update this article a bit later today.&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Category:T61&amp;diff=30671</id>
		<title>Category:T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Category:T61&amp;diff=30671"/>
		<updated>2007-06-25T02:56:45Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: /* Resources */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{| width=&amp;quot;100%&amp;quot;&lt;br /&gt;
|style=&amp;quot;vertical-align:top&amp;quot; |&lt;br /&gt;
&amp;lt;div style=&amp;quot;margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;&amp;quot;&amp;gt;&lt;br /&gt;
=== ThinkPad T61 ===&lt;br /&gt;
This pages gives an overview of all ThinkPad T61 related topics.&lt;br /&gt;
&lt;br /&gt;
==== Standard Features ====&lt;br /&gt;
* One of the following processors:&lt;br /&gt;
** [[Intel Core 2 Duo (Merom)]] 1.8, 2.0, 2.2, 2.4 GHz 800MHz FSB CPU&lt;br /&gt;
* One of the following graphics adapters:&lt;br /&gt;
** [[Intel Graphics Media Accelerator X3100]] &lt;br /&gt;
** [[nVidia Quadro NVS 140m]] (128 MB)&lt;br /&gt;
* One of the following displays:&lt;br /&gt;
** 14.1&amp;quot; TFT display with 1280x800  (WXGA)   resolution&lt;br /&gt;
** 14.1&amp;quot; TFT display with 1440x900  (WXGA+)  resolution&lt;br /&gt;
** 15.4&amp;quot; TFT display with 1280x800  (WXGA)   resolution&lt;br /&gt;
** 15.4&amp;quot; TFT display with 1680x1050 (WSXGA+) resolution&lt;br /&gt;
* 512 MB or 1 GB [[PC2-5300]] memory standard upgradable to 4 GB&lt;br /&gt;
* 60, 80, 100, 120 or 160GB 5400RPM SATA HDD (100Go available in 7200RPM, 160Go available with encryption)&lt;br /&gt;
** [[Full Disk Encryption (FDE)]] Available on some models&lt;br /&gt;
* [[AD1984]] HD Audio controller&lt;br /&gt;
* [[Ethernet Controllers#Intel Gigabit (10/100/1000)|Intel Gigabit Ethernet Controller]]&lt;br /&gt;
* [[UltraBay|UltraBay Slim]] with one of the following:&lt;br /&gt;
** [[UltraBay Slim DVD-ROM Drive]]&lt;br /&gt;
** [[UltraBay Slim CD-RW/DVD-ROM Combo II Drive]]&lt;br /&gt;
** [[UltraBay Slim Super Multi-Burner Drive]]&lt;br /&gt;
* [[IntelÂ® Turbo Memory hard drive cache]]&lt;br /&gt;
* [[MiniPCI Express slot]] 1 with one of the following:&lt;br /&gt;
** None (empty)&lt;br /&gt;
** [[Intel PRO/Wireless 3945ABG Mini-PCI Express Adapter]]&lt;br /&gt;
** [[Intel PRO/Wireless 4965AGN Mini-PCI Express Adapter]]&lt;br /&gt;
** [[ThinkPad 11a/b/g Wireless LAN Mini Express Adapter]]&lt;br /&gt;
** [[ThinkPad 11a/b/g/n Wireless LAN Mini Express Adapter]]&lt;br /&gt;
* [[MiniPCI Express slot]] 2 with one of the following:&lt;br /&gt;
** None (empty)&lt;br /&gt;
** [[Verizon 1xEV-DO WWAN]] (It seems to be a Sierra Wireless MC5720 Modem)&lt;br /&gt;
** [[Cingular HSDPA WWAN]] (Sierra Wireless MC8775)&lt;br /&gt;
* 1 [[CardBus slot]] (Type 2)&lt;br /&gt;
* 1 Slot with one of the following:&lt;br /&gt;
** [[ExpressCard slot|ExpressCard/54 slot]] &lt;br /&gt;
** SmartCard reader&lt;br /&gt;
** [[Ricoh_R5C843|4-in-1 Memory reader]]&lt;br /&gt;
* [[Embedded Security Subsystem|IBM Embedded Security Subsystem 2.0]]&lt;br /&gt;
* [[Active Protection System|IBM Active Protection System]]&lt;br /&gt;
* [[Integrated Fingerprint Reader]] on select models&lt;br /&gt;
* [[ThinkPad_Bluetooth_with_Enhanced_Data_Rate_(BDC-2)|Bluetooth]] on select models&lt;br /&gt;
* [[UltraNav]] (TrackPoint / Touchpad combo)&lt;br /&gt;
* IEEE1394 Firewire&lt;br /&gt;
* [[Centrino Pro]]&lt;br /&gt;
&amp;lt;/div&amp;gt;&lt;br /&gt;
|style=&amp;quot;vertical-align:top&amp;quot; |&lt;br /&gt;
[[Image:t60-models_nov06.jpg|ThinkPad T61]]&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
==== Resources ====&lt;br /&gt;
* [http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67709 T61 Product Overview ]&lt;br /&gt;
* [http://www-307.ibm.com/pc/support/site.wss/MIGR-67760.html T61 Hardware Maintenance Manual]&lt;br /&gt;
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&amp;amp;lndocid=MIGR-62465 T60/p Service and Troubleshooting Guide]&lt;br /&gt;
* [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&amp;amp;lndocid=MIGR-67686 T61 Setup Guide]&lt;br /&gt;
* [http://www5.pc.ibm.com/europe/me.nsf/LenovoDetail?OpenAgent&amp;amp;key=Notebooks:ThinkPad:ThinkPad+T+Series:Data+Sheet:English&amp;amp;&amp;amp;cntry=EUROPE-L T61 DataSheet ]&lt;br /&gt;
==== Reviews ====&lt;br /&gt;
* [http://www.notebookreview.com/default.asp?newsID=3708 NotebookReview.com], 2007-04-24&lt;br /&gt;
* [http://www.pcmag.com/article2/0,1759,2127379,00.asp PcMag.com], 2007-05-09&lt;br /&gt;
&lt;br /&gt;
==== Resources ====&lt;br /&gt;
* [http://www.klabs.be/~fpiat/linux/debian/Etch_on_Thinkpad_T61.html Installing Debian/Linux Etch on a Thinkpad T61], 2007-05-22&lt;br /&gt;
* [[Installing_Ubuntu_7.04_%28Feisty_Fawn%29_on_a_ThinkPad_T61]]&lt;br /&gt;
&lt;br /&gt;
(Note that the following categories applies to T60, They might also apply to T61 (test and update the list, please) : Thermal_Sensors Tp_smapi Table_of_ibm-acpi_LEDs Swsusp Software_Suspend_2 Rescue_and_Recovery Problems_with_SATA_and_Linux Problem_with_video_output_switching Problem_with_fan_noise Problem_with_high_pitch_noises How_to_control_fan_speed Embedded_Controller_Firmware&lt;br /&gt;
[[Category:T Series]]&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30636</id>
		<title>Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30636"/>
		<updated>2007-06-24T04:40:20Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: /* Can you hear me now?.... What? */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;We'll I got it basically working, so far (will update as i get more thing working).&lt;br /&gt;
&lt;br /&gt;
==Pre Installation Notes==&lt;br /&gt;
===SATA Issues===&lt;br /&gt;
At first, the Ubuntu Live CD would not start at all, this seems to be a problem with the SATA AHCI driver.  I had to go into the BIOS and change the SATA driver from ACHI to compatibility (What is the difference? Am I loosing performance?).&lt;br /&gt;
&lt;br /&gt;
===GM965 Woes... (Solved)===&lt;br /&gt;
After that the CD seemed to boot but the screen was just garbage [http://shadowarts.nonlogic.org/projects/thinkpad/screen_garbage.jpg Picture].  In order to get around that issue I had to go back and download the Alternate CD, which allows you to install in text only mode.  From here, the text-only install went okay.&lt;br /&gt;
&lt;br /&gt;
===nVIDIA Quadro NVS 140M Woes... (Solved)===&lt;br /&gt;
After initial issues like those explained above in the SATA Issues, I received the xorg error 'fatal error: no screens found'.  I was able to boot into Safe Graphics Mode and run the installer, though I had to move both window manager bars to see enough of the install window to use it.&lt;br /&gt;
&lt;br /&gt;
==Post Installation Notes==&lt;br /&gt;
===More GM965 Woes... (Solved Also)===&lt;br /&gt;
When I booted up after the installation, I was still getting the same garbage on the screen.  To resolve this I edited my [http://shadowarts.nonlogic.org/projects/thinkpad/xorg.conf xorg.conf] file as shown.  I also had to install the latest kernel for Feisty, as the one off of the install disk did have have /dev/agpgart.  And I could then use X11.  There were still some issues however.  The screen seemed somewhat fuzzy.  This was a little more challenging of a fix...  I found [http://www.spinics.net/lists/xorg/msg25099.html this] mailing list posting, according to it, there was a small glitch in the driver.  To fix it:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
apt-get install source xserver-xorg-video-intel&lt;br /&gt;
cd xserver-xorg-video-intel-1.9.94/&lt;br /&gt;
vim src/i830_lvds.c&lt;br /&gt;
Goto line 230 and delete (PFIT_ENABLE | VERT_AUTSCALE ....);, replacing it with 0;  then quit vim&lt;br /&gt;
dpkg-buildpackage -rfakeroot -uc -b&lt;br /&gt;
cd ..&lt;br /&gt;
dpkg -i xserver-xorg-video-intel_1.9.94-lubuntu3_amd64.deb (wont be amd64 with a 32-bit install)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Now reboot your computer, and it should work.  **NOTE: For some reason just restarting X didn't fix it, seems like you must reboot.**  At this point you should have a nice, crisp display.&lt;br /&gt;
&lt;br /&gt;
I am still working on aiglx and compiz (switching desktops on a cube doesnt seem to work, though I have some ideas...).  There are some issues with OpenGL apps freezing Xorg as well, but the standard 2D desktop works flawlessly.&lt;br /&gt;
&lt;br /&gt;
===ThinkFinger===&lt;br /&gt;
Ubuntu does not come with a package for thinkfinger.  Downloading the most recent source and building it was simple enough: Download most recent version (0.3 at time of writing)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
tar xvzf thinkfinger-0.3.tar.gz&lt;br /&gt;
cd thinkfinger-0.3/&lt;br /&gt;
./configure --with-securedir=/lib/security --with-birdir=/etc/pam_thinkfinger&lt;br /&gt;
make -j5             (hey its dual core!)&lt;br /&gt;
sudo make install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Configuring it is easy as well, open /etc/pam.d/common-auth:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
auth sufficient pam_thinkfiger.so&lt;br /&gt;
auth required pam_unix.so try_first_pass nullok_secure&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Now just run sudo tf-tool --add-user &amp;lt;username&amp;gt; and it will all be setup.  (I found this somewhere on the web, I wish I could give a source but I'm afraid I cant find it, thank you Anonymous!).&lt;br /&gt;
&lt;br /&gt;
===HDAPS===&lt;br /&gt;
This seems to be working fine now, I just follow the step on [How_to_protect_the_harddisk_through_APS].  Using hdaps-gl does the inverse of the accelerometer, though it's not really a big deal, the harddrive protection should still work.&lt;br /&gt;
&lt;br /&gt;
===Can you hear me now?.... What? (Solved!)===&lt;br /&gt;
After upgrading to 1.0.14 I still had no sound, and this took about a week to solved (though it was so sadly obvious though).  Just upgrading to alsa 1.0.14 will not be enough, there were a few patches released right after the release that fix the Thinkpad's.  The reason I missed this was because it was the same day so the release of 1.0.14!&lt;br /&gt;
&lt;br /&gt;
Anyway download the source code to the alsa-driver and apply these patches: (links to the revisions)&lt;br /&gt;
&lt;br /&gt;
* [http://hg.alsa-project.org/alsa-kernel/rev/958b39f3e8dd Fix Oops with AD1984 thinkpad model]&lt;br /&gt;
* [http://hg.alsa-project.org/alsa-kernel/rev/47ca87407c84 Fix AD1984 basic model]&lt;br /&gt;
* [http://hg.alsa-project.org/alsa-kernel/rev/ca37aeeeb0ea Fix Thinkpad X61/T61 outputs]&lt;br /&gt;
&lt;br /&gt;
After doing a make and make install reboot your computer (or rrmmod snd-hda-intel &amp;amp;&amp;amp; modprobe snd-hda-intel).  And run alsamixer (for me it only works as root atm).  You will have to play with the settings a bit.  Make sure the speaker option is not muted and leave the Internal Mic Boost at 0, other wise you will have a really loud microphone feedback sort of sound constantly.&lt;br /&gt;
&lt;br /&gt;
I had to chmod -R 777 /dev/snd/ to get everything work for now. (THIS IS NOT THE CORRECT WAY TO DO IT, IT WILL NOT STAY BETWEEN REBOOTS!).&lt;br /&gt;
&lt;br /&gt;
Audio playback should then work, audio capture (microphone) doesn't seem to work, but I am probably not going to try and fix it, I don't use the capture so I am not concerned with that at the moment.&lt;br /&gt;
&lt;br /&gt;
==Overall==&lt;br /&gt;
I initially had some big problems getting this working, but now its working quite well.  The wifi card worked at startup (uses madwifi) and I am happy because I don't seem to need any proprietary software to run this system.&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30547</id>
		<title>Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30547"/>
		<updated>2007-06-18T18:33:49Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: /* Can you here me now?.... What? */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;We'll I got it basically working, so far (will update as i get more thing working).&lt;br /&gt;
&lt;br /&gt;
==Pre Installation Notes==&lt;br /&gt;
===SATA Issues===&lt;br /&gt;
At first, the Ubuntu Live CD would not start at all, this seems to be a problem with the SATA AHCI driver.  I had to go into the BIOS and change the SATA driver from ACHI to compatibility (What is the difference? Am I loosing performance?).&lt;br /&gt;
&lt;br /&gt;
===GM965 Woes... (Solved)===&lt;br /&gt;
After that the CD seemed to boot but the screen was just garbage [http://shadowarts.nonlogic.org/projects/thinkpad/screen_garbage.jpg Picture].  In order to get around that issue I had to go back and download the Alternate CD, which allows you to install in text only mode.  From here, the text-only install went okay.&lt;br /&gt;
&lt;br /&gt;
==Post Installation Notes==&lt;br /&gt;
===More GM965 Woes... (Solved Also)===&lt;br /&gt;
When I booted up after the installation, I was still getting the same garbage on the screen.  To resolve this I edited my [http://shadowarts.nonlogic.org/projects/thinkpad/xorg.conf xorg.conf] file as shown.  I also had to install the latest kernel for Feisty, as the one off of the install disk did have have /dev/agpgart.  And I could then use X11.  There were still some issues however.  The screen seemed somewhat fuzzy.  This was a little more challenging of a fix...  I found [http://www.spinics.net/lists/xorg/msg25099.html this] mailing list posting, according to it, there was a small glitch in the driver.  To fix it:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
apt-get install source xserver-xorg-video-intel&lt;br /&gt;
cd xserver-xorg-video-intel-1.9.94/&lt;br /&gt;
vim src/i830_lvds.c&lt;br /&gt;
Goto line 230 and delete (PFIT_ENABLE | VERT_AUTSCALE ....);, replacing it with 0;  then quit vim&lt;br /&gt;
dpkg-buildpackage -rfakeroot -uc -b&lt;br /&gt;
cd ..&lt;br /&gt;
dpkg -i xserver-xorg-video-intel_1.9.94-lubuntu3_amd64.deb (wont be amd64 with a 32-bit install)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Now reboot your computer, and it should work.  **NOTE: For some reason just restarting X didn't fix it, seems like you must reboot.**  At this point you should have a nice, crisp display.&lt;br /&gt;
&lt;br /&gt;
I am still working on aiglx and compiz (switching desktops on a cube doesnt seem to work, though I have some ideas...).  There are some issues with OpenGL apps freezing Xorg as well, but the standard 2D desktop works flawlessly.&lt;br /&gt;
&lt;br /&gt;
===ThinkFinger===&lt;br /&gt;
Ubuntu does not come with a package for thinkfinger.  Downloading the most recent source and building it was simple enough: Download most recent version (0.3 at time of writing)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
tar xvzf thinkfinger-0.3.tar.gz&lt;br /&gt;
cd thinkfinger-0.3/&lt;br /&gt;
./configure --with-securedir=/lib/security --with-birdir=/etc/pam_thinkfinger&lt;br /&gt;
make -j5             (hey its dual core!)&lt;br /&gt;
sudo make install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Configuring it is easy as well, open /etc/pam.d/common-auth:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
auth sufficient pam_thinkfiger.so&lt;br /&gt;
auth required pam_unix.so try_first_pass nullok_secure&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Now just run sudo tf-tool --add-user &amp;lt;username&amp;gt; and it will all be setup.  (I found this somewhere on the web, I wish I could give a source but I'm afraid I cant find it, thank you Anonymous!).&lt;br /&gt;
&lt;br /&gt;
===HDAPS===&lt;br /&gt;
This seems to be working fine now, I just follow the step on [How_to_protect_the_harddisk_through_APS].  Using hdaps-gl does the inverse of the accelerometer, though it's not really a big deal, the harddrive protection should still work.&lt;br /&gt;
&lt;br /&gt;
===Can you hear me now?.... What?===&lt;br /&gt;
I upgraded to alsa 1.0.14 as it claims to have at least some support for the AD1984 chip, but so far it isn't looking good.  I found a [https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3163 bug report] on alsa's webpage and added a note about the information I could find, basically just a stack trace, hopefully this will be helpful to the guys at alsa.&lt;br /&gt;
&lt;br /&gt;
==Overall==&lt;br /&gt;
I initially had some big problems getting this working, but now its working quite well.  The wifi card worked at startup (uses madwifi) and I am happy because I don't seem to need any proprietary software to run this system.&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30511</id>
		<title>Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30511"/>
		<updated>2007-06-16T18:07:36Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;We'll I got it basically working, so far (will update as i get more thing working).&lt;br /&gt;
&lt;br /&gt;
==Pre Installation Notes==&lt;br /&gt;
===SATA Issues===&lt;br /&gt;
At first, the Ubuntu Live CD would not start at all, this seems to be a problem with the SATA AHCI driver.  I had to go into the BIOS and change the SATA driver from ACHI to compatibility (What is the difference? Am I loosing performance?).&lt;br /&gt;
&lt;br /&gt;
===GM965 Woes... (Solved)===&lt;br /&gt;
After that the CD seemed to boot but the screen was just garbage [http://shadowarts.nonlogic.org/projects/thinkpad/screen_garbage.jpg Picture].  In order to get around that issue I had to go back and download the Alternate CD, which allows you to install in text only mode.  From here, the text-only install went okay.&lt;br /&gt;
&lt;br /&gt;
==Post Installation Notes==&lt;br /&gt;
===More GM965 Woes... (Solved Also)===&lt;br /&gt;
When I booted up after the installation, I was still getting the same garbage on the screen.  To resolve this I edited my [http://shadowarts.nonlogic.org/projects/thinkpad/xorg.conf xorg.conf] file as shown.  I also had to install the latest kernel for Feisty, as the one off of the install disk did have have /dev/agpgart.  And I could then use X11.  There were still some issues however.  The screen seemed somewhat fuzzy.  This was a little more challenging of a fix...  I found [http://www.spinics.net/lists/xorg/msg25099.html this] mailing list posting, according to it, there was a small glitch in the driver.  To fix it:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
apt-get install source xserver-xorg-video-intel&lt;br /&gt;
cd xserver-xorg-video-intel-1.9.94/&lt;br /&gt;
vim src/i830_lvds.c&lt;br /&gt;
Goto line 230 and delete (PFIT_ENABLE | VERT_AUTSCALE ....);, replacing it with 0;  then quit vim&lt;br /&gt;
dpkg-buildpackage -rfakeroot -uc -b&lt;br /&gt;
cd ..&lt;br /&gt;
dpkg -i xserver-xorg-video-intel_1.9.94-lubuntu3_amd64.deb (wont be amd64 with a 32-bit install)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Now reboot your computer, and it should work.  **NOTE: For some reason just restarting X didn't fix it, seems like you must reboot.**  At this point you should have a nice, crisp display.&lt;br /&gt;
&lt;br /&gt;
I am still working on aiglx and compiz (switching desktops on a cube doesnt seem to work, though I have some ideas...).  There are some issues with OpenGL apps freezing Xorg as well, but the standard 2D desktop works flawlessly.&lt;br /&gt;
&lt;br /&gt;
===ThinkFinger===&lt;br /&gt;
Ubuntu does not come with a package for thinkfinger.  Downloading the most recent source and building it was simple enough: Download most recent version (0.3 at time of writing)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
tar xvzf thinkfinger-0.3.tar.gz&lt;br /&gt;
cd thinkfinger-0.3/&lt;br /&gt;
./configure --with-securedir=/lib/security --with-birdir=/etc/pam_thinkfinger&lt;br /&gt;
make -j5             (hey its dual core!)&lt;br /&gt;
sudo make install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Configuring it is easy as well, open /etc/pam.d/common-auth:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
auth sufficient pam_thinkfiger.so&lt;br /&gt;
auth required pam_unix.so try_first_pass nullok_secure&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Now just run sudo tf-tool --add-user &amp;lt;username&amp;gt; and it will all be setup.  (I found this somewhere on the web, I wish I could give a source but I'm afraid I cant find it, thank you Anonymous!).&lt;br /&gt;
&lt;br /&gt;
===HDAPS===&lt;br /&gt;
This seems to be working fine now, I just follow the step on [How_to_protect_the_harddisk_through_APS].  Using hdaps-gl does the inverse of the accelerometer, though it's not really a big deal, the harddrive protection should still work.&lt;br /&gt;
&lt;br /&gt;
===Can you here me now?.... What?===&lt;br /&gt;
I upgraded to alsa 1.0.14 as it claims to have at least some support for the AD1984 chip, but so far it isn't looking good.  I found a [https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3163 bug report] on alsa's webpage and added a note about the information I could find, basically just a stack trace, hopefully this will be helpful to the guys at alsa.&lt;br /&gt;
&lt;br /&gt;
==Overall==&lt;br /&gt;
I initially had some big problems getting this working, but now its working quite well.  The wifi card worked at startup (uses madwifi) and I am happy because I don't seem to need any proprietary software to run this system.&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30510</id>
		<title>Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30510"/>
		<updated>2007-06-16T18:05:00Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: /* HDAPS */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;We'll I got it basically working, so far (will update as i get more thing working).&lt;br /&gt;
&lt;br /&gt;
==Pre Installation Notes==&lt;br /&gt;
===SATA Issues===&lt;br /&gt;
At first, the Ubuntu Live CD would not start at all, this seems to be a problem with the SATA AHCI driver.  I had to go into the BIOS and change the SATA driver from ACHI to compatibility (What is the difference? Am I loosing performance?).&lt;br /&gt;
&lt;br /&gt;
===GM965 Woes... (Solved)===&lt;br /&gt;
After that the CD seemed to boot but the screen was just garbage http://shadowarts.nonlogic.org/projects/thinkpad/screen_garbage.jpg Picture].  In order to get around that issue I had to go back and download the Alternate CD, which allows you to install in text only mode.  From here, the text-only install went okay.&lt;br /&gt;
&lt;br /&gt;
==Post Installation Notes==&lt;br /&gt;
===More GM965 Woes... (Solved Also)===&lt;br /&gt;
When I booted up after the installation, I was still getting the same garbage on the screen.  To resolve this I edited my [[http://shadowarts.nonlogic.org/projects/thinkpad/xorg.conf xorg.conf]] file as shown.  I also had to install the latest kernel for Feisty, as the one off of the install disk did have have /dev/agpgart.  And I could then use X11.  There were still some issues however.  The screen seemed somewhat fuzzy.  This was a little more challenging of a fix...  I found [[http://www.spinics.net/lists/xorg/msg25099.html this]] mailing list posting, according to it, there was a small glitch in the driver.  To fix it:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
apt-get install source xserver-xorg-video-intel&lt;br /&gt;
cd xserver-xorg-video-intel-1.9.94/&lt;br /&gt;
vim src/i830_lvds.c&lt;br /&gt;
Goto line 230 and delete (PFIT_ENABLE | VERT_AUTSCALE ....);, replacing it with 0;  then quit vim&lt;br /&gt;
dpkg-buildpackage -rfakeroot -uc -b&lt;br /&gt;
cd ..&lt;br /&gt;
dpkg -i xserver-xorg-video-intel_1.9.94-lubuntu3_amd64.deb (wont be amd64 with a 32-bit install)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Now reboot your computer, and it should work.  **NOTE: For some reason just restarting X didn't fix it, seems like you must reboot.**  At this point you should have a nice, crisp display.&lt;br /&gt;
&lt;br /&gt;
I am still working on aiglx and compiz (switching desktops on a cube doesnt seem to work, though I have some ideas...).  It at least partially works.&lt;br /&gt;
&lt;br /&gt;
===ThinkFinger===&lt;br /&gt;
Ubuntu does not come with a package for thinkfinger.  Downloading the most recent source and building it was simple enough: Download most recent version (0.3 at time of writing)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
tar xvzf thinkfinger-0.3.tar.gz&lt;br /&gt;
cd thinkfinger-0.3/&lt;br /&gt;
./configure --with-securedir=/lib/security --with-birdir=/etc/pam_thinkfinger&lt;br /&gt;
make -j5             (hey its dual core!)&lt;br /&gt;
sudo make install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Configuring it is easy as well, open /etc/pam.d/common-auth:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
auth sufficient pam_thinkfiger.so&lt;br /&gt;
auth required pam_unix.so try_first_pass nullok_secure&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Now just run sudo tf-tool --add-user &amp;lt;username&amp;gt; and it will all be setup.  (I found this somewhere on the web, I wish I could give a source but I'm afraid I cant find it, thank you Anonymous!).&lt;br /&gt;
&lt;br /&gt;
===HDAPS===&lt;br /&gt;
This seems to be working fine now, I just follow the step on [How_to_protect_the_harddisk_through_APS]].  Using hdaps-gl does the inverse of the accelerometer, though it's not really a big deal, the harddrive protection should still work.&lt;br /&gt;
&lt;br /&gt;
===Can you here me now?.... What?===&lt;br /&gt;
I upgraded to alsa 1.0.14 as it claims to have at least some support for the AD1984 chip, but so far it isn't looking good.  I found a [https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3163 bug report] on alsa's webpage and added a note about the information I could find, basically just a stack trace, hopefully this will be helpful to the guys at alsa.&lt;br /&gt;
&lt;br /&gt;
==Overall==&lt;br /&gt;
I initially had some big problems getting this working, but now its working quite well.  The wifi card worked at startup (uses madwifi) and I am happy because I don't seem to need any proprietary software to run this system.&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30509</id>
		<title>Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30509"/>
		<updated>2007-06-16T18:02:08Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;We'll I got it basically working, so far (will update as i get more thing working).&lt;br /&gt;
&lt;br /&gt;
==Pre Installation Notes==&lt;br /&gt;
===SATA Issues===&lt;br /&gt;
At first, the Ubuntu Live CD would not start at all, this seems to be a problem with the SATA AHCI driver.  I had to go into the BIOS and change the SATA driver from ACHI to compatibility (What is the difference? Am I loosing performance?).&lt;br /&gt;
&lt;br /&gt;
===GM965 Woes... (Solved)===&lt;br /&gt;
After that the CD seemed to boot but the screen was just garbage http://shadowarts.nonlogic.org/projects/thinkpad/screen_garbage.jpg Picture].  In order to get around that issue I had to go back and download the Alternate CD, which allows you to install in text only mode.  From here, the text-only install went okay.&lt;br /&gt;
&lt;br /&gt;
==Post Installation Notes==&lt;br /&gt;
===More GM965 Woes... (Solved Also)===&lt;br /&gt;
When I booted up after the installation, I was still getting the same garbage on the screen.  To resolve this I edited my [[http://shadowarts.nonlogic.org/projects/thinkpad/xorg.conf xorg.conf]] file as shown.  I also had to install the latest kernel for Feisty, as the one off of the install disk did have have /dev/agpgart.  And I could then use X11.  There were still some issues however.  The screen seemed somewhat fuzzy.  This was a little more challenging of a fix...  I found [[http://www.spinics.net/lists/xorg/msg25099.html this]] mailing list posting, according to it, there was a small glitch in the driver.  To fix it:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
apt-get install source xserver-xorg-video-intel&lt;br /&gt;
cd xserver-xorg-video-intel-1.9.94/&lt;br /&gt;
vim src/i830_lvds.c&lt;br /&gt;
Goto line 230 and delete (PFIT_ENABLE | VERT_AUTSCALE ....);, replacing it with 0;  then quit vim&lt;br /&gt;
dpkg-buildpackage -rfakeroot -uc -b&lt;br /&gt;
cd ..&lt;br /&gt;
dpkg -i xserver-xorg-video-intel_1.9.94-lubuntu3_amd64.deb (wont be amd64 with a 32-bit install)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Now reboot your computer, and it should work.  **NOTE: For some reason just restarting X didn't fix it, seems like you must reboot.**  At this point you should have a nice, crisp display.&lt;br /&gt;
&lt;br /&gt;
I am still working on aiglx and compiz (switching desktops on a cube doesnt seem to work, though I have some ideas...).  It at least partially works.&lt;br /&gt;
&lt;br /&gt;
===ThinkFinger===&lt;br /&gt;
Ubuntu does not come with a package for thinkfinger.  Downloading the most recent source and building it was simple enough: Download most recent version (0.3 at time of writing)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
tar xvzf thinkfinger-0.3.tar.gz&lt;br /&gt;
cd thinkfinger-0.3/&lt;br /&gt;
./configure --with-securedir=/lib/security --with-birdir=/etc/pam_thinkfinger&lt;br /&gt;
make -j5             (hey its dual core!)&lt;br /&gt;
sudo make install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Configuring it is easy as well, open /etc/pam.d/common-auth:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
auth sufficient pam_thinkfiger.so&lt;br /&gt;
auth required pam_unix.so try_first_pass nullok_secure&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Now just run sudo tf-tool --add-user &amp;lt;username&amp;gt; and it will all be setup.  (I found this somewhere on the web, I wish I could give a source but I'm afraid I cant find it, thank you Anonymous!).&lt;br /&gt;
&lt;br /&gt;
===HDAPS===&lt;br /&gt;
It appears that the T61 is not included in the list of supported devices.  I have a feeling I just need to add it to the driver.&lt;br /&gt;
&lt;br /&gt;
===Can you here me now?.... What?===&lt;br /&gt;
I upgraded to alsa 1.0.14 as it claims to have at least some support for the AD1984 chip, but so far it isn't looking good.  I found a [https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3163 bug report] on alsa's webpage and added a note about the information I could find, basically just a stack trace, hopefully this will be helpful to the guys at alsa.&lt;br /&gt;
&lt;br /&gt;
==Overall==&lt;br /&gt;
I initially had some big problems getting this working, but now its working quite well.  The wifi card worked at startup (uses madwifi) and I am happy because I don't seem to need any proprietary software to run this system.&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
	<entry>
		<id>https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30505</id>
		<title>Installing Ubuntu 7.04 (Feisty Fawn) on a ThinkPad T61</title>
		<link rel="alternate" type="text/html" href="https://www.thinkwiki.org/w/index.php?title=Installing_Ubuntu_7.04_(Feisty_Fawn)_on_a_ThinkPad_T61&amp;diff=30505"/>
		<updated>2007-06-15T21:34:30Z</updated>

		<summary type="html">&lt;p&gt;Shadowarts: â†Created page with 'We'll I got it basically working, so far (will update as i get more thing working).  ==Pre Installation Notes== ===SATA Issues=== At first, the Ubuntu Live CD would not st...'&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;We'll I got it basically working, so far (will update as i get more thing working).&lt;br /&gt;
&lt;br /&gt;
==Pre Installation Notes==&lt;br /&gt;
===SATA Issues===&lt;br /&gt;
At first, the Ubuntu Live CD would not start at all, this seems to be a problem with the SATA AHCI driver.  I had to go into the BIOS and change the SATA driver from ACHI to compatibility (What is the difference? Am I loosing performance?).&lt;br /&gt;
&lt;br /&gt;
===GM965 Woes... (Solved)===&lt;br /&gt;
After that the CD seemed to boot but the screen was just garbage http://shadowarts.nonlogic.org/projects/thinkpad/screen_garbage.jpg Picture].  In order to get around that issue I had to go back and download the Alternate CD, which allows you to install in text only mode.  From here, the text-only install went okay.&lt;br /&gt;
&lt;br /&gt;
==Post Installation Notes==&lt;br /&gt;
===More GM965 Woes... (Solved Also)===&lt;br /&gt;
When I booted up after the installation, I was still getting the same garbage on the screen.  To resolve this I edited my [[http://shadowarts.nonlogic.org/projects/thinkpad/xorg.conf xorg.conf]] file as shown.  I also had to install the latest kernel for Feisty, as the one off of the install disk did have have /dev/agpgart.  And I could then use X11.  There were still some issues however.  The screen seemed somewhat fuzzy.  This was a little more challenging of a fix...  I found [[http://www.spinics.net/lists/xorg/msg25099.html this]] mailing list posting, according to it, there was a small glitch in the driver.  To fix it:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
apt-get install source xserver-xorg-video-intel&lt;br /&gt;
cd xserver-xorg-video-intel-1.9.94/&lt;br /&gt;
vim src/i830_lvds.c&lt;br /&gt;
Goto line 230 and delete (PFIT_ENABLE | VERT_AUTSCALE ....);, replacing it with 0;  then quit vim&lt;br /&gt;
dpkg-buildpackage -rfakeroot -uc -b&lt;br /&gt;
cd ..&lt;br /&gt;
dpkg -i xserver-xorg-video-intel_1.9.94-lubuntu3_amd64.deb (wont be amd64 with a 32-bit install)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Now reboot your computer, and it should work.  **NOTE: For some reason just restarting X didn't fix it, seems like you must reboot.**  At this point you should have a nice, crisp display.&lt;br /&gt;
&lt;br /&gt;
I am still working on aiglx and compiz (switching desktops on a cube doesnt seem to work, though I have some ideas...).  It at least partially works.&lt;br /&gt;
&lt;br /&gt;
===ThinkFinger===&lt;br /&gt;
Ubuntu does not come with a package for thinkfinger.  Downloading the most recent source and building it was simple enough: Download most recent version (0.3 at time of writing)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
tar xvzf thinkfinger-0.3.tar.gz&lt;br /&gt;
cd thinkfinger-0.3/&lt;br /&gt;
./configure --with-securedir=/lib/security --with-birdir=/etc/pam_thinkfinger&lt;br /&gt;
make -j5             (hey its dual core!)&lt;br /&gt;
sudo make install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Configuring it is easy as well, open /etc/pam.d/common-auth:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
auth sufficient pam_thinkfiger.so&lt;br /&gt;
auth required pam_unix.so try_first_pass nullok_secure&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Now just run sudo tf-tool --add-user &amp;lt;username&amp;gt; and it will all be setup.  (I found this somewhere on the web, I wish I could give a source but I'm afraid I cant find it, thank you Anonymous!).&lt;br /&gt;
&lt;br /&gt;
==HDAPS==&lt;br /&gt;
It appears that the T61 is not included in the list of supported devices.  I have a feeling I just need to add it to the driver.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==Overall==&lt;br /&gt;
I initially had some big problems getting this working, but now its working quite well.  The wifi card worked at startup (uses madwifi) and I am happy because I don't seem to need any proprietary software to run this system.&lt;/div&gt;</summary>
		<author><name>Shadowarts</name></author>
		
	</entry>
</feed>