Tp smapi

2009-01-18T21:19:09Z

SMOKEING: /* R series */

{| width="100%"
|style="vertical-align:top;padding-right:20px;width:10px;white-space:nowrap;" | __TOC__
|style="vertical-align:top" |
The <tt>tp_smapi</tt> kernel module exposes some features of the ThinkPad hardware/firmware via a <tt>sysfs</tt> interface. Currently, the main implemented functionality is control of battery charging and extended battery status. It also includes an improved version of the [[HDAPS]] driver. The underlying hardware interfaces are [[SMAPI support for Linux|SMAPI]] and direct access to the embedded controller.

For older ThinkPad models, see also [[tpctl]].

This driver uses undocumented features and direct hardware access, so it may work unreliably or even damage your hardware; but so far no such damage has been reported.
|}

===Features===
*Battery charge/discharge control
*Battery status information
*Modified [[HDAPS]] driver with improved stability, model support and functionality

===Project Homepage / Availability===
* Project page: http://tpctl.sourceforge.net/
* You need to [http://sourceforge.net/project/showfiles.php?group_id=1212&package_id=171579 download] only the <tt>tp_smapi</tt> package.

===Installation===
====Installation from source====
You will need the kernel headers and makefiles corresponding to your current kernel version. On {{Fedora}}, this means {{cmdroot|yum install kernel-devel-$(uname -r)}} .

:{{cmdroot|tar xzvf tp_smapi-0.39.tgz}}
:{{cmdroot|cd tp_smapi-0.39}}

Then, either compile and load the driver within the current working directory (for testing):
:{{cmdroot|make load}}
OR compile and install into the kernel's module path:
:{{cmdroot|make install}}

If you use the [[HDAPS]] driver, add <tt>HDAPS=1</tt> to also patch the <tt>hdaps</tt> for compatibility with <tt>tp_smapi</tt> (this requires a kernel source tree matching the current kernel).
Again, either load the driver within the current working directory:
:{{cmdroot|1=make load HDAPS=1}}
OR install into the kernel's module path:
:{{cmdroot|1=make install HDAPS=1}}

To prepare a stand-alone patch against the current kernel tree (including
a patch against <tt>hdaps</tt> and new <tt>Kconfig</tt> entries):
:{{cmdroot|make patch}}

To delete all autogenerated files:
:{{cmdroot|make clean}}

The original kernel tree is never modified by any these commands.
The {{path|/lib/modules}} directory is modified only by {{cmdroot|make install}}.

====Installation in Gentoo====
The {{Gentoo}} portage system carries a [http://packages.gentoo.org/package/app-laptop/tp_smapi tp_smapi package], which follows the latest version pretty closely. On a Gentoo system, you can install and load as follows.

If you use the [[HDAPS]] driver, do this first:

* Disable the <tt>hdaps</tt> module in your kernel configuration (Device Drivers → Hardware Monitoring Support → IBM Hard Drive Active Protection System)
* Rebuild and install the kernel
* Add the <tt>hdaps</tt> use flag in {{path|/etc/make.conf}}
* {{cmdroot|rmmod hdaps}}

Then:
* {{cmdroot|emerge tp_smapi}} (or install tp_smapi with hdaps support manually, as above)
* {{cmdroot|echo "tp_smapi" >> /etc/modules.autoload.d/kernel-2.6}}
* {{cmdroot|echo "hdaps" >> /etc/modules.autoload.d/kernel-2.6}}

Then reboot, or run:
* {{cmdroot|modprobe tp_smapi}}
* {{cmdroot|modprobe hdaps}}

====Installation on Debian unstable (sid) or testing (lenny)====
Debian now contains the [http://packages.debian.org/tp-smapi packaged module source] and prebuilt modules for Debian kernels.

If you use a custom kernel, you can build tp_smapi with module-assistant:
* {{cmdroot|aptitude install tp-smapi-source}}
* {{cmdroot|m-a -t a-i tp-smapi}}

If you use a stock Debian kernel, you can install the tp_smapi modules with:
* {{cmdroot|apt-get install tp-smapi-modules-`uname -r`}}

====Installation on Ubuntu Hardy====
Ubuntu ships tp_smapi in their linux-ubuntu-modules Package since Hardy, so you don't have to build it yourself. Please note that they have renamed tp_smapi's modified <tt>hdaps</tt> module to <tt>hdaps_ec</tt>. You should load <tt>hdaps_ec</tt>, not <tt>hdaps</tt>.

====Installation on older Ubuntu/Debian====
Installation on Ubuntu or Debian is quite easy, but there are a few things to look after:

To get your system ready for compiling code, install the build-essentials (as root, of course, as all of the following comands; Ubuntu users have to prepend 'sudo' to every line and enter their own password when prompted):
<pre><nowiki>apt-get install build-essential</nowiki></pre>

To get tp_smapi to work, obtain the latest source as mentioned above and unpack it. If you want to use HDAPS, you need to install the kernel source matching te kernel you are running. To do so, issue this:
<pre><nowiki>uname -r</nowiki></pre>
This will give you the version of your current kernel.
Debian users execute the following:
<pre><nowiki>apt-get install linux-source-`uname -r`</nowiki></pre>
Ubuntu users execute the following using the kernel-version only (exclude -XX-generic; e.g. 'linux-source-2.6.20'):
<pre><nowiki>apt-get install linux-source-`uname -r`</nowiki></pre>

Be sure to unpack the source file. The easiest way is to open Nautilus as root:
<pre><nowiki>sudo nautilus</nowiki></pre>
Then browse to /usr/src/ and extract the source file to that directory.

Now change to the tp_smapi dir:
<pre><nowiki>cd tp_smapi-X.YY</nowiki></pre> (X.YY being the version-number of [[tp_smapi]])
and make and install tp_smapi as instructed above.

If you get an error that the kernel version isn't matching (or that you need to set KSRC/KBUILD), please check that there is a symlink from the modules dir to the kernel source:
<pre><nowiki>root@localhost:~#ls -l /lib/modules/2.6.20-16-generic
lrwxrwxrwx 1 root root 28 2007-02-02 08:39 build -> /usr/src/linux-source-2.6.20</nowiki></pre>
Create the link if the line above is not existent:
<pre><nowiki>root@localhost:~#ln -s /usr/src/linux-source-2.6.20 /lib/modules/2.6.20-16-generic/build</nowiki></pre>

Now the following will build and install the correct modules to their locations:
<pre><nowiki>make install HDAPS=1</nowiki></pre>
To make sure your system loads the modules at boot time, do this:
<pre><nowiki>echo "tp_smapi" >> /etc/modules
echo "hdaps" >> /etc/modules</nowiki></pre>
and update your initramfs:
<pre><nowiki>update-initramfs -u</nowiki></pre>

To get tp_smapi running now, just load the modules:
<pre><nowiki>modprobe -a tp_smapi hdaps</nowiki></pre>

This description was tested on Kubuntu 'Feisty Fawn' and should work on all Debian-based distros with minor tweaks.

'''EDIT:''' Works on Kubuntu 7.10 ("Gutsy Gibbon"), too

===Battery charge control features===
To set the thresholds for starting and stopping battery charging (in percent of current full charge capacity):
:{{cmdroot|echo 40 > /sys/devices/platform/smapi/BAT0/start_charge_thresh}}
:{{cmdroot|echo 70 > /sys/devices/platform/smapi/BAT0/stop_charge_thresh}}
:{{cmdroot|cat /sys/devices/platform/smapi/BAT0/*_charge_thresh}}
{{HINT|Battery charging thresholds can be used to keep Li-Ion ad Li-Polymer batteries partially charged, in order to [[Maintenance#Battery_treatment|increase their lifetime]].}}
To prevent charging for 17 minutes (regardless of thresholds):
:{{cmdroot|echo 17 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes}}
{{HINT|Charge inhibiting can be used to reduce the power draw of the laptop, in order to use an under-spec power supply that can't handle the combined power draw of running and charging. It can also be used to control which battery is charged when [[How to use UltraBay batteries|using an Ultrabay battery]].}}

To cancel charging preventation:
:{{cmdroot|echo 0 > /sys/devices/platform/smapi/BAT0/inhibit_charge_minutes}}

To force battery discharging (even if connected to AC):
:{{cmdroot|echo 1 > /sys/devices/platform/smapi/BAT0/force_discharge}}
{{HINT|This can be used to choose which battery is discharged when [[How to use UltraBay batteries|using an UltraBay battery]].}}

To cancel forced discharge:
:{{cmdroot|echo 0 > /sys/devices/platform/smapi/BAT0/force_discharge}}

===Battery status features===
To view extended battery status such as charging state, voltage, current, capacity, cycle count and model information:

<pre>
# cat /sys/devices/platform/smapi/BAT0/installed
# cat /sys/devices/platform/smapi/BAT0/state # idle/charging/discharging
# cat /sys/devices/platform/smapi/BAT0/cycle_count
# cat /sys/devices/platform/smapi/BAT0/current_now # instantaneous current
# cat /sys/devices/platform/smapi/BAT0/current_avg # last minute average
# cat /sys/devices/platform/smapi/BAT0/power_now # instantaneous power
# cat /sys/devices/platform/smapi/BAT0/power_avg # last minute average
# cat /sys/devices/platform/smapi/BAT0/last_full_capacity
# cat /sys/devices/platform/smapi/BAT0/remaining_percent
# cat /sys/devices/platform/smapi/BAT0/remaining_running_time
# cat /sys/devices/platform/smapi/BAT0/remaining_charging_time
# cat /sys/devices/platform/smapi/BAT0/remaining_capacity
# cat /sys/devices/platform/smapi/BAT0/design_capacity
# cat /sys/devices/platform/smapi/BAT0/voltage
# cat /sys/devices/platform/smapi/BAT0/design_voltage
# cat /sys/devices/platform/smapi/BAT0/manufacturer
# cat /sys/devices/platform/smapi/BAT0/model
# cat /sys/devices/platform/smapi/BAT0/barcoding
# cat /sys/devices/platform/smapi/BAT0/chemistry
# cat /sys/devices/platform/smapi/BAT0/serial
# cat /sys/devices/platform/smapi/BAT0/manufacture_date
# cat /sys/devices/platform/smapi/BAT0/first_use_date
# cat /sys/devices/platform/smapi/BAT0/temperature # in milli-Celsius
# cat /sys/devices/platform/smapi/ac_connected
</pre>

The raw status data is also available, including some fields not listed above (in case you can figure them out):

:{{cmdroot|cat /sys/devices/platform/smapi/BAT0/dump}}

In all of the above, replace <tt>BAT0</tt> with <tt>BAT1</tt> to address the 2nd battery.

Note that the battery status readout conflicts with the stock [[HDAPS|hdaps]] driver, so if you use <tt>hdaps</tt> you will need to load <tt>tp_smapi</tt> using {{cmdroot|1=make load HDAPS=1}} (see [[#Bundled hdaps driver|Bundled hdaps driver]] below).

On [[ACPI]]-enabled systems, most of above information is also available through the files under {{path|/proc/acpi/battery}}. However, the ACPI interface does not include the instantaneous power and cycle count readouts, and does not work well when [[How to use UltraBay batteries|hotswapping UltraBay batteries]].

====Scripts====
Some scripts can make it easier to grep the information you need from tp_smapi
* [[battery.rb]]

===Other features===

There is also [[sysfs]] attribute for making direct SMAPI requests to the SM BIOS firmware. Don't touch it unless you really know what you're doing. Example:
# echo '211a 100 0 0' > /sys/devices/platform/smapi/smapi_request; cat /sys/devices/platform/smapi/smapi_request
211a 34b b2 0 0 0 'OK'
The "4b" in the 2nd value, converted to decimal, is 75: the current charging stop threshold (stop_charge_thresh).

===Bundled <tt>hdaps</tt> driver===

The tp_smapi package includes a modified version of the <tt>hdaps</tt> Linux kernel driver used by the [[HDAPS]] system. To use <tt>tp_smapi</tt> and <tt>hdaps</tt> concurrently, you '''must''' use the modified version.

To build the modified version, simply append the <tt>HDAPS=1</tt> parameter to the <tt>make</tt> command (see [[#Installation|Installation]] above):
:{{cmdroot|1=make load HDAPS=1}}
or
:{{cmdroot|1=make install HDAPS=1}}

If you don't do that, you will not be able to load <tt>tp_smapi</tt> (and its support module <tt>thinkpad_ec</tt>) when <tt>hdaps</tt> is loaded, and vice versa. You can use <tt>rmmod</tt> to switch between these modules.

Note that some of the battery status is also visible through ACPI ({{path|/proc/acpi/battery/*}}), independently of <tt>tp_smapi</tt>.

The modified <tt>hdaps</tt> has several changes:
* The <tt>hdaps</tt> driver in mainline kernels conflicts with the extended battery status (they use the same IO ports). The modified <tt>hdaps</tt> coordinates this access through the bundled <tt>thinkpad_ec</tt> driver.
* The modified <tt>hdaps</tt> driver fixes reliability and improves support for recent ThinkPad models (*60 and newer), since unlike the mainline driver, it correctly follows the Embedded Controller communication protocol.
* Several other improvements, such as the ability to control the polling rate.

===Troubleshooting===
==== <tt>thinkpad_ec: cannot claim io ports 0x1600-0x161f</tt> ====
The "<tt>thinkpad_ec: cannot claim io ports 0x1600-0x161f!</tt>" error happens when loading the <tt>thinkpad_ec</tt> module on some recent ThinkPad models, since the ACPI BIOS DSDT is reserving ports used by tp_smapi.

As a workaround, add the <tt>force_io=1</tt> module parameter to <tt>thinkpad_ec</tt> in {{path|/etc/modprobe.conf}} (or your distribution's equivalent). For transient testing, load the modules as follows:

: {{cmdroot|1=make load HDAPS=1 FORCE_IO=1}}

Note: force_io option was added in tp_smapi v0.40 (released 2008-12-16).

Models which need this option include:
* ThinkPad {{T400}}
* ThinkPad {{T500}}
* ThinkPad {{X200}}

More information:
* http://bugzilla.kernel.org/show_bug.cgi?id=12221
* http://www.nabble.com/thinkpad_ec-fails-to-load-on-Thinkpad-T500-td19932985.html

==== <tt>thinkpad_ec: no ThinkPad embedded controller!</tt> ====
If you get "<tt>thinkpad_ec: no ThinkPad embedded controller!</tt>" when trying to load the module on a supported model listed below, you should [[BIOS_Upgrade|upgrade your BIOS]]. Some early BIOS (like 1.x on the X31) don't handle the embedded controller.

===Model-specific status===

<div style="font-size: 92%">
{| border="1" cellspacing="0" cellpadding="2"
|+<tt>tp_smapi</tt> feature support matrix
|-
! colspan=12 style="text-align:center;background:#efefef;" |
=====A series=====
|-
{{tp_smapi/model_status_table_header}}
|-
! {{A22p}} 2629-USG
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{A30}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! colspan=12 style="text-align:center;background:#efefef;" |
=====G series=====
|-
{{tp_smapi/model_status_table_header}}
|-
! {{G41}}
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! colspan=12 style="text-align:center;background:#efefef;" |
=====R series=====
|-
{{tp_smapi/model_status_table_header}}
|-
! {{R31}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cunk}} || || || || No SMAPI BIOS
|-
! {{R40}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{R50}}
| {{Cunk}} || {{Cno}} || {{Cunk}} || {{Cunk}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{R50e}} 1834-JAG
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{R50e}} 1834-5US
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{R50p}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{R51}} 18*
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes|text=}} 0 || 0.32 || 3.22 || || Machine types 1829, 1830, 1831 and 1836
|-
! {{R51}} 28*
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || 1.29 || || Machine types 2883, 2887, 2888, 2889, 2894 and 2495
|-
! {{R52}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes|text=}} 0 || 0.33 || 1.29 || 1.06 ||
|-
! {{R60}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} ||{{Cyes}} || {{Cno|text=}} 1 || 0.33 || || ||
|-
! {{R61}}
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || {{Cyes}} ||{{Cyes}} || {{Cyes|text=}} 1 || 0.35-test1 || 7KETA7WW 2.07 || 7KHT24WW 1.08 || Machine type 8918 ||
|-
! {{R61i}}
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || {{Cyes}} ||{{Cunk}} || {{Cunk}} || || || || Machine type 8250 ||
|-

! colspan=12 style="text-align:center;background:#efefef;" |

=====T series=====
|-
{{tp_smapi/model_status_table_header}}
|-
! {{T20}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cunk}} || || || || Has SMAPI BIOS but no function is supported. EC LPC3 protocol fails.
|-
! {{T22}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cunk}} || || || || Has SMAPI BIOS but no function is supported. EC LPC3 protocol fails.
|-
! {{T23}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{T30}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{T40}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{T40p}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{T41}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{T41p}} 2373-AM9
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cyes}} || {{Cyes|text=}} 1 || 0.32 || 3.20 || v3.04 ||
|-
! {{T42}}
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{T42p}} 2373-KXU
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes|text=}} 1 || 0.32 || 3.21 || || Stop charge threshold works in Windows, but dmesg says "__get_real_thresh: cannot get stop_thresh of bat=0: Function is not supported by SMAPI BIOS".
|-
! {{T42p}} 2373-KUU
| {{Cyes}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{T43}} 2686
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes|text=}} 0 || 0.33 || 1.27 || ||
|-
! {{T43p}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cyes|text=}} 0 || || || ||
|-
! {{T60}}
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 7 || 0.32 || || ||
|-
! {{T60}}
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 1 || 0.34 || || ||
|-
! {{T60}} 1951-24G
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || 0.36 || 1.09a || ||
|-
! {{T60p}} 8743-CTO
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes|text=}} 1 || 0.32 || || ||
|-
! {{T61}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 1 || 0.32 || || || [http://ubuntuforums.org/showthread.php?p=3146719 ref]
|-
! {{T61p}} 6457-7XG
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 1 || 0.32 || || || [http://ubuntuforums.org/showthread.php?p=3146719 ref]
|-
! {{T400}} and {{T500}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} 1 || 0.40 || 1.19 || || Requires <tt>force_io=1</tt> parameter to <tt>thinkpad_ec</tt>
|-
! colspan=12 style="text-align:center;background:#efefef;" |

=====X series=====
|-
{{tp_smapi/model_status_table_header}}
|-
! {{X20}} 2662-31G
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{X24}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{X30}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || 0.34 || 1.09 || ||
|-
! {{X31}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cunk}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{X32}}
| {{Cno}} || {{Cno}} || {{Cno}} || {{Cno}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{X40}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 3 || 0.32 || 2.08 || 1.62 ||
|-
! {{X41}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 3 || 0.32 || || ||
|-
! {{X41_Tablet}}
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cyes}} || {{Cno|text=}} (see ref) || 0.32 || || [http://sourceforge.net/mailarchive/message.php?msg_name=4757BD30.8080808%40ugcs.caltech.edu ref] || ||
|-
! {{X60}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 6 || || 2.07 || 1.10 || 2.6.20 issue (see discussion)
|-
! {{X60s}} 1704-5UG
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cno|text=}} 3 || 0.34 || 7BETD2WW 2.13 || 7BHT40WW 1.13 ||
|-
! {{X61s}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 6 / 3 || 0.32 || || || [http://www.slackwiki.org/ThinkPad_X61s ref] says 3 but conflicting report received
|-
! {{X60_Tablet}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 3 || 0.34 || 7JET25WW (1.10 ) || 7JHT13WW 1.04 || [http://luke.no-ip.org/x60tablet/ ref] [http://rad.bioinfo.ulaval.ca/hardware/x60tablet ref]
|-
! {{X61_Tablet}}
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 6 || 0.32 || || ||
|-
! {{X61}} 7675-4KU
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cno|text=}} 6 || 0.34 || 7NET30WW (1.11 ) || 7MHT24WW-1.02 ||
|-
! {{X61}} 7675-CTO
| {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cunk}} || {{Cyes}} || {{Cno|text=}} 6 || 0.35-test1 || || ||
|-
! {{X300}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || 0.37 || 7TET25WW (1.02 ) || 7THT15WW-1.00c ||
|-
! colspan=12 style="text-align:center;background:#efefef;" |

=====Z series=====
|-
{{tp_smapi/model_status_table_header}}
|-
! {{Z60m}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{Z60t}}
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || {{Cyes}} || {{Cunk}} || {{Cunk}} || || || ||
|-
! {{Z61m}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes|text=}} 0 || 0.32 || || ||
|-
! {{Z61t}}
| {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || || || || [https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/45014 ref]
|-
! {{Z61p}}
| {{Cyes}} || {{Cyes}} || {{Cunk}} || {{Cyes}} || {{Cyes}} || {{Cyes}} || {{Cunk}} || || || ||
|-
! colspan=12 style="text-align:center;background:#efefef;" |

=====SL series and IdeaPad=====
|-
! colspan=12 style="text-align:left" |
The ThinkPad SL series and IdeaPad series have firmware that is completely different from other ThinkPad models. Neither [[tp_smapi]] nor [[thinkpad-acpi]] support these models.
|}
</div>

SMAPI capabilities may depend on the BIOS version as well, so upgrading to the latest version of the BIOS might provide more SMAPI functions (especially true for long-lived BIOS with lots of releases, like the TP-1R).

Please update the above and report your experience on the [[Talk:tp_smapi|discussion]] page. If the module loads but gives a "<tt>not supported</tt>" or "<tt>not implementeded</tt>" error when you try to use some specific file in {{path|/sys/devices/platform/smapi/}}, please report the <tt>dmesg</tt> output and whether the corresponding functionality is available under Windows - maybe your ThinkPad just can't do that.

While at it, you may also want to add your laptop to the [[list of DMI IDs]].

=====HDAPS axis orientation=====
<sup>1</sup> The HDAPS axis orientation is set using the <tt>invert</tt> module parameter (at load time) or sysfs attribute (at runtime). The <tt>hdaps</tt> driver of tp_smapi supports all 8 possible sensor orientations (inversion and swapping). You can use [[HDAPS#Visualisation_of_ThinkPad_orientation|hdaps visualisation]] to check if the settings is correct.

The <tt>invert</tt> parameter is an integer between 0 and 7, whose meaning is defined below. (This is confusing. Most people will find it easier to just try all 8 possibilities.)

Let <tt>X</tt> and <tt>Y</tt> denote the hardware readouts. Let <tt>R</tt> denote the laptop's roll (tilt left/right), and let <tt>P</tt> denote the laptop's pitch (tilt forward/backward). The possible values are as follows:
invert=0: R= X P= Y (same as mainline)
invert=1: R=-X P=-Y (same as mainline)
invert=2: R=-X P= Y (new)
invert=3: R= X P=-Y (new)
invert=4: R= Y P= X (new)
invert=5: R=-Y P=-X (new)
invert=6: R=-Y P= X (new)
invert=7: R= Y P=-X (new)

[[Category:Drivers]] [[Category:Patches]]

===Tools using this driver===

The driver's interface can be accessed directly through the files under {{path|/sys/devices/platform/smapi}}, or via the following tools:
* [[KThinkBat]] - display battery status on the KDE <tt>kicker</tt> panel.
* [[gkrellm-ThinkBat]] - battery status plugin for Gkrellm2
* {{CodeRef|thinkpad-smapi.sh}} - script to display various SMAPI information using tp_smapi module.

Intel PRO/Wireless 4965AGN Mini-PCI Express Adapter

2009-01-03T19:38:42Z

SMOKEING: /* Flaws */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
== Intel PRO/Wireless 4965AGN Mini-PCI Express ==
This is a Mini-PCI Express WiFi Adapter

== Features ==
* Chipset: Intel 4965AGN ([http://www.intel.com/support/wireless/wlan/4965agn/index.htm Intel Docs.])
* IEEE Standards: 802.11a, 802.11b, 802.11g (802.11n '''Some models Only''')
* PCI ID: 8086:4230
* PCI ID: 8086:4229 (not actually seen on Thinkpad, yet)
* PCI ID: 8086:4233 (not actually seen on Thinkpad, yet)
* PCI ID: 8086:422D (not actually seen on Thinkpad, yet)
</div>
|style="vertical-align:top" |
[[image:4965AGN.jpg|Mini-PCI WiFi Adapter]]<br/>
|}
== IBM Partnumbers ==
42T0865, 42T0867, 42T0869, 42T0871, 42T0905 : Intel PRO/Wireless 4965AGN (11n enabled)

42T0873, 42T0875, 42T0877, 42T0879, : Intel PRO/Wireless 4965AGN (11n disabled)

(From {{T61}} Hardware maintenance Manual)

{{NOTE| Only the IBM Parts will work, any other parts will give an 1802 error on Post because the sub-vendor PCI ID is different, see [[Problem with unauthorized MiniPCI network card]] for more details}}

{{NOTE| Part numbers above will not work with ThinkPad models earlier than the 61 (T61, X61) series, even if the ThinkPad supports Mini-PCI Express. A 42T0865 card was tested in a T60, and resulted in an 1802 POST error.}}

== Hardware switch ==

Some ThinkPads have a hardware switch that must be in the '''on''' position for the radio to work, regardless of driver state:

[[Image:Wireless-switch.png|(ThinkPad R60 radio switch in the ON position)]]

== Support ==
* [[Iwl4965]]
* Success with ndiswrapper (on dell 640m) [http://ubuntuforums.org/showthread.php?p=2690284]

== Procedures for using this card under Linux using Intel wireless driver ==
* http://forums.fedoraforum.org/forum/showthread.php?t=159550
* [[Installing Debian Lenny on a ThinkPad T61#WiFi: Intel 4965AGN]]

== ThinkPads this card may be found in ==
* {{T61}}, {{T61p}}, {{R61}}, {{X61}}, {{X61s}}, {{X61_Tablet}}

== Flaws ==
* lacks promiscuous mode sniffing capability (however, works OK in Linux (2.6.27 onward) with aircrack), good signal strength meter (see notes "sharing Experience" at the bottom of link below).[[Talk:Intel_PRO/Wireless_4965AGN_Mini-PCI_Express_Adapter]]

* [[Iwl4965]]/iwlagn driver can cause kernel panics in some cases on Ubuntu Hardy 8.04 and Intrepid 8.10 (and possibly others). See [https://wiki.ubuntu.com/IntrepidReleaseNotes#System%20lock-ups%20with%20Intel%204965%20wireless Intrepid release note] and [https://bugs.launchpad.net/ubuntu/+source/linux-backports-modules-2.6.27/+bug/276990 Launchpad entry]. Some sources say this is fixed in linux-backports-modules-intrepid-generic, while others still report kernel panics with the backported module.

[[Category: Components]]

How to improve harddisk performance

2008-11-10T22:57:44Z

SMOKEING: /* Description */

== Description ==
This tweak can increase the performance of your HDD by enabling DMA, IDE 32-bit I/O and setting the interrupt-unmask flag, which improves Linux's responsiveness. The last parameter sets the IDE Block Mode to fetch 16 blocks per I/O interrupt. Depending on your drive this value may vary (run hdparm -iI /dev/hda to find it out).

'''Caution:''' On some hard disks, inadvertent experimenting with hdparm options may corrupt the filesystem! Again, have a look into the man page of hdparm to find out if your model is affected.

On systems where the traditional ATA/(E)IDE and ATAPI stack is used, the following is appropriate:

<pre>
hdparm -d1 -c1 -u1 -m16 /dev/hda
</pre>

On newer systems with SATA hard drives (exposed e.g. as /dev/sda), only -d option is applicable, and it has no effect as DMA is already enabled. (An R61, interestingly, has a SATA HDD whilst the CD+DVD drive is connected via an IDE controller.)

You may also want to tune the acoustic setting (-M), power management mode (-B): for best performance, try -M254 and -B254).

== Successfully tested Thinkpad models ==
The settings above have been successfully tested on the following models:

T20, T22, T23, T40

Please add your model if missing.

ThinkWiki - User contributions [en]

Tp smapi

Intel PRO/Wireless 4965AGN Mini-PCI Express Adapter

How to improve harddisk performance