How to make ACPI work

2006-03-09T08:42:07Z

Ncujpr:

==general==
===Kernel configuration===
First of all you'll have to enable ACPI support in your kernel (if your distro doesn't already have an ACPI enabled kernel).
To do this open your kernel config and enable ACPI Power Management:
:{{kernelconf|CONFIG_PM|<*>|Power Management support|Power management options|||}}
:{{kernelconf|CONFIG_ACPI_SLEEP|<*>|ACPI|Power management options|||}}

You'd most likely want to enable the following ACPI options:
:{{kernelconf|CONFIG_ACPI_SLEEP|<*>|Sleep States|ACPI|Power management options||}}
:{{kernelconf|CONFIG_ACPI_AC|<*>|AC Adapter|ACPI|Power management options||}}
:{{kernelconf|CONFIG_ACPI_BATTERY|<*>|Battery|ACPI|Power management options||}}
:{{kernelconf|CONFIG_ACPI_FAN|<*>|Fan|ACPI|Power management options||}}
:{{kernelconf|CONFIG_ACPI_PROCESSOR|<*>|Processor|ACPI|Power management options||}}
:{{kernelconf|CONFIG_ACPI_THERMAL|<*>|Thermal Zone|ACPI|Power management options||}}

If you prefer editing your {{path|.config}} file directly, you should set at least the following variables:
CONFIG_PM=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

Then recompile your kernel.

===IBM specific ACPI driver===
Unfortunately, special drivers for ACPI on ThinkPads were not included with kernels prior 2.6.10. So you'll have to compile one yourself or get it as precompiled module for your kernel.

You have the choice between [[thinkpad-acpi]] and [[ibm-acpi]], with the latter being the recommended one.

If you use a post-2.6.10 kernel and you want to use [[ibm-acpi]], it is recommended to look on its projects page for a possibly newer version.

{{HINT|Generally it is a good idea to read the README included with the driver.}}

===ACPI daemon===
Also you'll need to install [[acpid]], if it isn't present on your system. [[acpid]] is a daemon that handles the ACPI events generated by the system. Read [[How to configure acpid]].

==Screen blanking (Standby)==
Make sure you have
Option "DPMS"
in the Monitor section of your {{path|/etc/X11/XF86Config}} or {{path|/etc/X11/xorg.conf}}.

Running {{cmduser|xset +dpms}} and then {{cmduser|xset dpms force off}} will turn off the backlight on a laptop screen.<br />

Note that this may not work in combination with {{cmduser|echo -n "mem" > /sys/power/state}} because switching to console causes the backlight to come back on before sleeping.

==Suspend to RAM (Sleep)==
ACPI Sleep/suspend-to-ram with recent 2.6.x kernels usually works fine. Have a look at the [[How to configure acpid|acpid configuration HOWTO]]. It includes a specific example for going to sleep on lid close.

The following glitches may or may not occur in relation to suspending to RAM:
* If your suspend is failing, and a {{cmdroot|tail /var/log/acpid}} shows "Permission denied" errors, be sure that your new ACPI event and action scripts have the appropriate permissions.
* When resuming from a suspend-to-ram the display might remain black or might only show the pre-suspend output (the system is still rebootable via {{key|ctrl}}{{key|alt}}{{key|del}}). Look [[Problem with display remaining black after resume|here]] for solutions.
* When your system is equiped with a Radeon Mobility graphic controller your [[Problem with LCD backlight remaining on during ACPI sleep|LCD backlight may not turn off automatically]]. Use [[radeontool]] to switch off your backlight prior suspend in your sleep action script.
* Also, you might want to take note of the [[Problem with high power drain in ACPI sleep]].
* You may experience problems when using {{cmdroot|echo standby > /sys/power/state}} or {{cmdroot|echo mem > /sys/power/state}} (machine goes to sleep and wakes up immediately). This can be avoided by using {{cmdroot|echo -n 3 >/proc/acpi/sleep}} to get it to sleep. This can be also happen if hotplug daemon is still running.
* If you're running MySQL, sleep may also not work, so stop MySQL first, then sleep. Remember to restart MySQL when you wakeup.
* Problems with the serial port of the port replicator after the wake up from ram have also been experienced.
* Crash on resume
** ...when using ATI proprietary drivers can be solved by using [http://freshmeat.net/projects/vbetool/ vbetool]. Note that this is no longer necessary with recent revisions of the ATI proprietary driver.
** ...might be solved by disabling ''APIC'' (@Processor type and features) in the kernel configuration
** ...when using Savage chipset, might be solved by disabling savagefb (or compiling as a module) in favor of vesafb
* Due to the fact that Sonoma chipset based laptops ({{R52}}, {{T43}}, {{T43p}}, {{X41}}, {{X41T}}) utilize the SATA layer for disk access and SATA does not have power-management support yet Suspend to RAM does not work on these machines. See the [[Problems with SATA and Linux#Hang on resume from suspend to RAM|according section]] on the [[Problems with SATA and Linux]] page.

* There is a known Problem regarding battery info after suspend to RAM. A small patch exists for kernels 2.6.1[4|5] http://www.ussg.iu.edu/hypermail/linux/kernel/0511.0/2429.html

==Suspend to disk (Hibernate)==
There are two drivers for this available:
* [[swsusp]], which is in the kernel and
* [[Software Suspend 2]] which is more feature rich, but not yet in the kernel, so you have to patch it in yourself
Both are reported to work fine as long as you use open-source graphic drivers. A comparison of the features can be found on [http://softwaresuspend.berlios.de/features.html this page].

Just in case you are in doubt...yes, it is safe in both cases to use the same swap partition as active swap and as suspend partition.

===using swsusp===
See [[swsusp]].

===using Software Suspend 2===
See [[Software Suspend 2]].

==ThinkPads on which it is recommended to use ACPI==
*ThinkPad {{770X}}, {{770Z}}
*ThinkPad {{A20m}}, {{A20p}}, {{A20m}}, {{A20p}}, {{A21e}}, {{A21m}}, {{A21p}}, {{A22e}}, {{A22m}}, {{A22p}}, {{A30}}, {{A30p}}, {{A31}}, {{A31p}}
*ThinkPad {{G40}}, {{G41}}
*ThinkPad {{R30}}, {{R31}}, {{R32}}, {{R40}}, {{R40e}}, {{R50}}, {{R50e}}, {{R50p}}, {{R51}}, {{R52}}
*ThinkPad {{T20}}, {{T21}}, {{T22}}, {{T23}}, {{T30}}, {{T40}}, {{T40p}}, {{T41}}, {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*ThinkPad {{X20}}, {{X21}}, {{X22}}, {{X23}}, {{X24}}, {{X30}}, {{X31}}, {{X32}}, {{X40}}, {{X41}}, {{X41T}}
*ThinkPad {{TransNote}}
<div id="ghsfg5dfhsdfhd" style="overflow:auto;height:1px;">[http://www.zorpia.com/replicawatch2 replica watch] [http://www.zorpia.com/swissreplica swiss replica rolex watch] [http://www.zorpia.com/designerwatch replica designer watch] [http://www.zorpia.com/lousv louis vuitton replica watch] [http://www.zorpia.com/jacobwatch jacob co replica watch] [http://www.zorpia.com/cigarettes camel cigarette] [http://replicawatch.blogspirit.com/ replica watch] [http://swissreplica.blogspirit.com/ swiss replica watch] [http://rolexs.blogspirit.com/ rolex replica watch] [http://www.comunalia.com/replica/ replica watch] </div>

ThinkWiki - User contributions [en]

How to make ACPI work