ThinkWiki - User contributions [en]

Problem with display remaining black after resume

2006-05-14T19:40:22Z

Gsu:

There has been a problem encountered where the display stays black on resuming from suspend.

The symptom might have you think first that your system hang up, but you will realize that your ThinkPad works and you can even reset it via {{key|Ctrl}}{{key|Alt}}{{key|Del}}.

==Affected Models==
*ThinkPad {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*Thinkpad {{T23}}
*ThinkPad {{X21}}, {{X30}}, {{X31}}, {{X40}}, {{X41}}
*ThinkPad {{R31}}, {{R50e}}{{footnote|1}}, {{R50p}}, {{R51}} (with BIOS 1.11), {{R52}}
*ThinkPad {{A30p}}
*ThinkPad {{390X}} (doesn't wake up; LCD backlight on, harddrive light remains on)
*ThinkPad {{Z60t}}, {{Z60m}}

==Affected Operating Systems==
*Linux (it's a kernel issue)

==Solutions==
===Solution for ThinkPads with 1400x1050 internal LCD and Intel 915GM ===
see [[1400x1050 on Intel 915GM]].
===Solution for ThinkPads with ATI graphic chips (or Intel 915GM)===
One solution may be to provide the {{bootparm|acpi_sleep|s3_bios}} kernel parameter in your kernel parameter line.

For grub this can look like this:

title Linux, kernel 2.6.11-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.11-1-686 root=/dev/hda1 ro acpi_sleep=s3_bios
initrd /boot/initrd.img-2.6.11-1-686
savedefault
boot

For lilo it can look like this:

image=/boot/vmlinuz
append="acpi_sleep=s3_bios"

The actual process of going to sleep is then managed through a sleep script; as a start, see the {{path|sleep.sh}} script in the Extreme Graphics 2 section below, but note the following comments:

In [[:Category:OpenSUSE|OpenSUSE]] 10.1 (at least on a T43p) it's needed to override default options of s2ram if you use the newer ATI driver. It can be done putting SUSPEND2RAM_FORCE="yes" and SUSPEND2RAM_ACPI_SLEEP="3" in /etc/powersave/sleep.

In {{Ubuntu}} or {{Kubuntu}}, it may be necessary to modify {{path|/etc/default/acpi-support}}. In that file, make sure that {{path|ACPI_SLEEP}} is uncommented and set to true. With ATI chips, also make sure that {{path|SAVE_VBE_STATE}} is uncommented and set to true; with Intel chips, on the other hand, ensure that nothing is done with respect to VBE--no reposts, no state saves.

In {{Fedora}}, it may be necessary with Intel chips to edit the {{path|resume_video()}} function in {{path|/etc/pm/functions-intel}}, by commenting out the VBE post and restore. Furthermore, the laptop, after waking up, may go back to sleep whenever the AC adapter is disconnected. When this happens, it is caused by a bug in the HAL daemon that incorrectly reports the lid as closed ({{path|lshal}} returns {{bootparm|button.state.value|true}}, among other things). The simplest way to resolve this is to add a line to the sleep script to restart the HAL daemon ''before'' sleeping the machine:

# restart the HAL daemon
service haldaemon restart

If you do this, it will unfortunately crash {{path|gnome-power-manager}}, if you use that, though it can be restarted manually.

{{NOTE|It is possible this method will not work if the laptop is docked.}}

Another solution is to use vbetool. If you are using {{Debian}} with the hibernate package, uncomment "EnableVbetool yes" in {{path|/etc/hibernate/hibernate.conf}} (or {{path|/etc/hibernate/ram.conf}}).

===Solution for ThinkPads with Intel Extreme Graphics 2===
{{NOTE|
On [[:Category:X40|X40]]s/[[:Category:X41|X41]]s - even with Intel Extreme Graphics - and for [[:Category:R52|R52]]s with Intel Graphics Media Accelerator 900 the [[Problem with display remaining black after resume#Solution for ThinkPads with ATI graphic chips|solution for ATI graphics chips]] above is reported to work. In this case, make sure no changes to VBE are made, especially no state saves and no reposts.}}

The following solution should work on 865G, 865GV, 855GM, 855GME, 852GME chipsets.
*First of all, '''do not''' use the {{bootparm|acpi_sleep|s3_bios}} kernel parameter.
*Second, completely remove framebuffer support from your kernel. If it's built as modules, it is important that they do not get loaded at all.
*Before suspending, change to a console and safe the video state with {{cmdroot|cat /proc/bus/pci/00/02.0 > /tmp/video_state}}.
*On resume, restore the video state with {{cmdroot|cat /tmp/video_state > /proc/bus/pci/00/02.0}} and change back to X.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

# change to console 1
FGCONSOLE=`fgconsole`
chvt 6

# safe video state
cat /proc/bus/pci/00/02.0 > /tmp/video_state

# sync filesystem
sync

# sync hardware clock with system time
hwclock --systohc

# go to sleep
echo -n 3 > /proc/acpi/sleep

# waking up
# restore system clock
hwclock --hctosys

# restore video state
cat /tmp/video_state > /proc/bus/pci/00/02.0

# change back to X
chvt $FGCONSOLE

# clean up behind us
rm /tmp/video_state

===Solution for ThinkPads with Intel I830 Chipset===
The following solution worked for me on an X30 with I830M chipset with kernel >= 2.6.16.
*this works with vesafb and also with intelfb frambuffer support.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

FGCONSOLE=`fgconsole`
chvt 8
sync
hwclock --systohc

echo -n "mem" > /sys/power/state

hwclock --hctosys
vbetool post

if [ "$FGCONSOLE" -ge "7" ] ; then
chvt $FGCONSOLE
else
chvt 7
chvt $FGCONSOLE
fi

{{footnotes|
#If you have this problem with R50e and the above solution doesn't work, try switching to console first. An example sleep script can be found [[How to configure acpid|here]].
}}

Problem with display remaining black after resume

2006-05-14T19:38:38Z

Gsu:

There has been a problem encountered where the display stays black on resuming from suspend.

The symptom might have you think first that your system hang up, but you will realize that your ThinkPad works and you can even reset it via {{key|Ctrl}}{{key|Alt}}{{key|Del}}.

==Affected Models==
*ThinkPad {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*Thinkpad {{T23}}
*ThinkPad {{X21}}, {{X30}}, {{X31}}, {{X40}}, {{X41}}
*ThinkPad {{R31}}, {{R50e}}{{footnote|1}}, {{R50p}}, {{R51}} (with BIOS 1.11), {{R52}}
*ThinkPad {{A30p}}
*ThinkPad {{390X}} (doesn't wake up; LCD backlight on, harddrive light remains on)
*ThinkPad {{Z60t}}, {{Z60m}}

==Affected Operating Systems==
*Linux (it's a kernel issue)

==Solutions==
===Solution for ThinkPads with 1400x1050 internal LCD and Intel 915GM ===
see [[1400x1050 on Intel 915GM]].
===Solution for ThinkPads with ATI graphic chips (or Intel 915GM)===
One solution may be to provide the {{bootparm|acpi_sleep|s3_bios}} kernel parameter in your kernel parameter line.

For grub this can look like this:

title Linux, kernel 2.6.11-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.11-1-686 root=/dev/hda1 ro acpi_sleep=s3_bios
initrd /boot/initrd.img-2.6.11-1-686
savedefault
boot

For lilo it can look like this:

image=/boot/vmlinuz
append="acpi_sleep=s3_bios"

The actual process of going to sleep is then managed through a sleep script; as a start, see the {{path|sleep.sh}} script in the Extreme Graphics 2 section below, but note the following comments:

In [[OpenSUSE]] 10.1 (at least on a T43p) it's needed to override default options of s2ram if you use the newer ATI driver. It can be done putting SUSPEND2RAM_FORCE="yes" and SUSPEND2RAM_ACPI_SLEEP="3" in /etc/powersave/sleep.

In {{Ubuntu}} or {{Kubuntu}}, it may be necessary to modify {{path|/etc/default/acpi-support}}. In that file, make sure that {{path|ACPI_SLEEP}} is uncommented and set to true. With ATI chips, also make sure that {{path|SAVE_VBE_STATE}} is uncommented and set to true; with Intel chips, on the other hand, ensure that nothing is done with respect to VBE--no reposts, no state saves.

In {{Fedora}}, it may be necessary with Intel chips to edit the {{path|resume_video()}} function in {{path|/etc/pm/functions-intel}}, by commenting out the VBE post and restore. Furthermore, the laptop, after waking up, may go back to sleep whenever the AC adapter is disconnected. When this happens, it is caused by a bug in the HAL daemon that incorrectly reports the lid as closed ({{path|lshal}} returns {{bootparm|button.state.value|true}}, among other things). The simplest way to resolve this is to add a line to the sleep script to restart the HAL daemon ''before'' sleeping the machine:

# restart the HAL daemon
service haldaemon restart

If you do this, it will unfortunately crash {{path|gnome-power-manager}}, if you use that, though it can be restarted manually.

{{NOTE|It is possible this method will not work if the laptop is docked.}}

Another solution is to use vbetool. If you are using {{Debian}} with the hibernate package, uncomment "EnableVbetool yes" in {{path|/etc/hibernate/hibernate.conf}} (or {{path|/etc/hibernate/ram.conf}}).

===Solution for ThinkPads with Intel Extreme Graphics 2===
{{NOTE|
On [[:Category:X40|X40]]s/[[:Category:X41|X41]]s - even with Intel Extreme Graphics - and for [[:Category:R52|R52]]s with Intel Graphics Media Accelerator 900 the [[Problem with display remaining black after resume#Solution for ThinkPads with ATI graphic chips|solution for ATI graphics chips]] above is reported to work. In this case, make sure no changes to VBE are made, especially no state saves and no reposts.}}

The following solution should work on 865G, 865GV, 855GM, 855GME, 852GME chipsets.
*First of all, '''do not''' use the {{bootparm|acpi_sleep|s3_bios}} kernel parameter.
*Second, completely remove framebuffer support from your kernel. If it's built as modules, it is important that they do not get loaded at all.
*Before suspending, change to a console and safe the video state with {{cmdroot|cat /proc/bus/pci/00/02.0 > /tmp/video_state}}.
*On resume, restore the video state with {{cmdroot|cat /tmp/video_state > /proc/bus/pci/00/02.0}} and change back to X.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

# change to console 1
FGCONSOLE=`fgconsole`
chvt 6

# safe video state
cat /proc/bus/pci/00/02.0 > /tmp/video_state

# sync filesystem
sync

# sync hardware clock with system time
hwclock --systohc

# go to sleep
echo -n 3 > /proc/acpi/sleep

# waking up
# restore system clock
hwclock --hctosys

# restore video state
cat /tmp/video_state > /proc/bus/pci/00/02.0

# change back to X
chvt $FGCONSOLE

# clean up behind us
rm /tmp/video_state

===Solution for ThinkPads with Intel I830 Chipset===
The following solution worked for me on an X30 with I830M chipset with kernel >= 2.6.16.
*this works with vesafb and also with intelfb frambuffer support.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

FGCONSOLE=`fgconsole`
chvt 8
sync
hwclock --systohc

echo -n "mem" > /sys/power/state

hwclock --hctosys
vbetool post

if [ "$FGCONSOLE" -ge "7" ] ; then
chvt $FGCONSOLE
else
chvt 7
chvt $FGCONSOLE
fi

{{footnotes|
#If you have this problem with R50e and the above solution doesn't work, try switching to console first. An example sleep script can be found [[How to configure acpid|here]].
}}

Problem with display remaining black after resume

2006-05-14T19:37:04Z

Gsu:

There has been a problem encountered where the display stays black on resuming from suspend.

The symptom might have you think first that your system hang up, but you will realize that your ThinkPad works and you can even reset it via {{key|Ctrl}}{{key|Alt}}{{key|Del}}.

==Affected Models==
*ThinkPad {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*Thinkpad {{T23}}
*ThinkPad {{X21}}, {{X30}}, {{X31}}, {{X40}}, {{X41}}
*ThinkPad {{R31}}, {{R50e}}{{footnote|1}}, {{R50p}}, {{R51}} (with BIOS 1.11), {{R52}}
*ThinkPad {{A30p}}
*ThinkPad {{390X}} (doesn't wake up; LCD backlight on, harddrive light remains on)
*ThinkPad {{Z60t}}, {{Z60m}}

==Affected Operating Systems==
*Linux (it's a kernel issue)

==Solutions==
===Solution for ThinkPads with 1400x1050 internal LCD and Intel 915GM ===
see [[1400x1050 on Intel 915GM]].
===Solution for ThinkPads with ATI graphic chips (or Intel 915GM)===
One solution may be to provide the {{bootparm|acpi_sleep|s3_bios}} kernel parameter in your kernel parameter line.

For grub this can look like this:

title Linux, kernel 2.6.11-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.11-1-686 root=/dev/hda1 ro acpi_sleep=s3_bios
initrd /boot/initrd.img-2.6.11-1-686
savedefault
boot

For lilo it can look like this:

image=/boot/vmlinuz
append="acpi_sleep=s3_bios"

The actual process of going to sleep is then managed through a sleep script; as a start, see the {{path|sleep.sh}} script in the Extreme Graphics 2 section below, but note the following comments:

In ||OpenSUSE]] 10.1 (at least on a T43p) it's needed to override default options of s2ram if you use the newer ATI driver. It can be done putting SUSPEND2RAM_FORCE="yes" and SUSPEND2RAM_ACPI_SLEEP="3" in /etc/powersave/sleep.

In {{Ubuntu}} or {{Kubuntu}}, it may be necessary to modify {{path|/etc/default/acpi-support}}. In that file, make sure that {{path|ACPI_SLEEP}} is uncommented and set to true. With ATI chips, also make sure that {{path|SAVE_VBE_STATE}} is uncommented and set to true; with Intel chips, on the other hand, ensure that nothing is done with respect to VBE--no reposts, no state saves.

In {{Fedora}}, it may be necessary with Intel chips to edit the {{path|resume_video()}} function in {{path|/etc/pm/functions-intel}}, by commenting out the VBE post and restore. Furthermore, the laptop, after waking up, may go back to sleep whenever the AC adapter is disconnected. When this happens, it is caused by a bug in the HAL daemon that incorrectly reports the lid as closed ({{path|lshal}} returns {{bootparm|button.state.value|true}}, among other things). The simplest way to resolve this is to add a line to the sleep script to restart the HAL daemon ''before'' sleeping the machine:

# restart the HAL daemon
service haldaemon restart

If you do this, it will unfortunately crash {{path|gnome-power-manager}}, if you use that, though it can be restarted manually.

{{NOTE|It is possible this method will not work if the laptop is docked.}}

Another solution is to use vbetool. If you are using {{Debian}} with the hibernate package, uncomment "EnableVbetool yes" in {{path|/etc/hibernate/hibernate.conf}} (or {{path|/etc/hibernate/ram.conf}}).

===Solution for ThinkPads with Intel Extreme Graphics 2===
{{NOTE|
On [[:Category:X40|X40]]s/[[:Category:X41|X41]]s - even with Intel Extreme Graphics - and for [[:Category:R52|R52]]s with Intel Graphics Media Accelerator 900 the [[Problem with display remaining black after resume#Solution for ThinkPads with ATI graphic chips|solution for ATI graphics chips]] above is reported to work. In this case, make sure no changes to VBE are made, especially no state saves and no reposts.}}

The following solution should work on 865G, 865GV, 855GM, 855GME, 852GME chipsets.
*First of all, '''do not''' use the {{bootparm|acpi_sleep|s3_bios}} kernel parameter.
*Second, completely remove framebuffer support from your kernel. If it's built as modules, it is important that they do not get loaded at all.
*Before suspending, change to a console and safe the video state with {{cmdroot|cat /proc/bus/pci/00/02.0 > /tmp/video_state}}.
*On resume, restore the video state with {{cmdroot|cat /tmp/video_state > /proc/bus/pci/00/02.0}} and change back to X.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

# change to console 1
FGCONSOLE=`fgconsole`
chvt 6

# safe video state
cat /proc/bus/pci/00/02.0 > /tmp/video_state

# sync filesystem
sync

# sync hardware clock with system time
hwclock --systohc

# go to sleep
echo -n 3 > /proc/acpi/sleep

# waking up
# restore system clock
hwclock --hctosys

# restore video state
cat /tmp/video_state > /proc/bus/pci/00/02.0

# change back to X
chvt $FGCONSOLE

# clean up behind us
rm /tmp/video_state

===Solution for ThinkPads with Intel I830 Chipset===
The following solution worked for me on an X30 with I830M chipset with kernel >= 2.6.16.
*this works with vesafb and also with intelfb frambuffer support.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

FGCONSOLE=`fgconsole`
chvt 8
sync
hwclock --systohc

echo -n "mem" > /sys/power/state

hwclock --hctosys
vbetool post

if [ "$FGCONSOLE" -ge "7" ] ; then
chvt $FGCONSOLE
else
chvt 7
chvt $FGCONSOLE
fi

{{footnotes|
#If you have this problem with R50e and the above solution doesn't work, try switching to console first. An example sleep script can be found [[How to configure acpid|here]].
}}

Problem with display remaining black after resume

2006-05-14T19:35:27Z

Gsu:

There has been a problem encountered where the display stays black on resuming from suspend.

The symptom might have you think first that your system hang up, but you will realize that your ThinkPad works and you can even reset it via {{key|Ctrl}}{{key|Alt}}{{key|Del}}.

==Affected Models==
*ThinkPad {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*Thinkpad {{T23}}
*ThinkPad {{X21}}, {{X30}}, {{X31}}, {{X40}}, {{X41}}
*ThinkPad {{R31}}, {{R50e}}{{footnote|1}}, {{R50p}}, {{R51}} (with BIOS 1.11), {{R52}}
*ThinkPad {{A30p}}
*ThinkPad {{390X}} (doesn't wake up; LCD backlight on, harddrive light remains on)
*ThinkPad {{Z60t}}, {{Z60m}}

==Affected Operating Systems==
*Linux (it's a kernel issue)

==Solutions==
===Solution for ThinkPads with 1400x1050 internal LCD and Intel 915GM ===
see [[1400x1050 on Intel 915GM]].
===Solution for ThinkPads with ATI graphic chips (or Intel 915GM)===
One solution may be to provide the {{bootparm|acpi_sleep|s3_bios}} kernel parameter in your kernel parameter line.

For grub this can look like this:

title Linux, kernel 2.6.11-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.11-1-686 root=/dev/hda1 ro acpi_sleep=s3_bios
initrd /boot/initrd.img-2.6.11-1-686
savedefault
boot

For lilo it can look like this:

image=/boot/vmlinuz
append="acpi_sleep=s3_bios"

The actual process of going to sleep is then managed through a sleep script; as a start, see the {{path|sleep.sh}} script in the Extreme Graphics 2 section below, but note the following comments:

In '''OpenSuse 10.1''' (at least on a T43p) it's needed to override default options of s2ram if you use the newer ATI driver. It can be done putting SUSPEND2RAM_FORCE="yes" and SUSPEND2RAM_ACPI_SLEEP="3" in /etc/powersave/sleep.

In {{Ubuntu}} or {{Kubuntu}}, it may be necessary to modify {{path|/etc/default/acpi-support}}. In that file, make sure that {{path|ACPI_SLEEP}} is uncommented and set to true. With ATI chips, also make sure that {{path|SAVE_VBE_STATE}} is uncommented and set to true; with Intel chips, on the other hand, ensure that nothing is done with respect to VBE--no reposts, no state saves.

In {{Fedora}}, it may be necessary with Intel chips to edit the {{path|resume_video()}} function in {{path|/etc/pm/functions-intel}}, by commenting out the VBE post and restore. Furthermore, the laptop, after waking up, may go back to sleep whenever the AC adapter is disconnected. When this happens, it is caused by a bug in the HAL daemon that incorrectly reports the lid as closed ({{path|lshal}} returns {{bootparm|button.state.value|true}}, among other things). The simplest way to resolve this is to add a line to the sleep script to restart the HAL daemon ''before'' sleeping the machine:

# restart the HAL daemon
service haldaemon restart

If you do this, it will unfortunately crash {{path|gnome-power-manager}}, if you use that, though it can be restarted manually.

{{NOTE|It is possible this method will not work if the laptop is docked.}}

Another solution is to use vbetool. If you are using {{Debian}} with the hibernate package, uncomment "EnableVbetool yes" in {{path|/etc/hibernate/hibernate.conf}} (or {{path|/etc/hibernate/ram.conf}}).

===Solution for ThinkPads with Intel Extreme Graphics 2===
{{NOTE|
On [[:Category:X40|X40]]s/[[:Category:X41|X41]]s - even with Intel Extreme Graphics - and for [[:Category:R52|R52]]s with Intel Graphics Media Accelerator 900 the [[Problem with display remaining black after resume#Solution for ThinkPads with ATI graphic chips|solution for ATI graphics chips]] above is reported to work. In this case, make sure no changes to VBE are made, especially no state saves and no reposts.}}

The following solution should work on 865G, 865GV, 855GM, 855GME, 852GME chipsets.
*First of all, '''do not''' use the {{bootparm|acpi_sleep|s3_bios}} kernel parameter.
*Second, completely remove framebuffer support from your kernel. If it's built as modules, it is important that they do not get loaded at all.
*Before suspending, change to a console and safe the video state with {{cmdroot|cat /proc/bus/pci/00/02.0 > /tmp/video_state}}.
*On resume, restore the video state with {{cmdroot|cat /tmp/video_state > /proc/bus/pci/00/02.0}} and change back to X.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

# change to console 1
FGCONSOLE=`fgconsole`
chvt 6

# safe video state
cat /proc/bus/pci/00/02.0 > /tmp/video_state

# sync filesystem
sync

# sync hardware clock with system time
hwclock --systohc

# go to sleep
echo -n 3 > /proc/acpi/sleep

# waking up
# restore system clock
hwclock --hctosys

# restore video state
cat /tmp/video_state > /proc/bus/pci/00/02.0

# change back to X
chvt $FGCONSOLE

# clean up behind us
rm /tmp/video_state

===Solution for ThinkPads with Intel I830 Chipset===
The following solution worked for me on an X30 with I830M chipset with kernel >= 2.6.16.
*this works with vesafb and also with intelfb frambuffer support.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

FGCONSOLE=`fgconsole`
chvt 8
sync
hwclock --systohc

echo -n "mem" > /sys/power/state

hwclock --hctosys
vbetool post

if [ "$FGCONSOLE" -ge "7" ] ; then
chvt $FGCONSOLE
else
chvt 7
chvt $FGCONSOLE
fi

{{footnotes|
#If you have this problem with R50e and the above solution doesn't work, try switching to console first. An example sleep script can be found [[How to configure acpid|here]].
}}

Problem with display remaining black after resume

2006-05-14T19:34:58Z

Gsu:

There has been a problem encountered where the display stays black on resuming from suspend.

The symptom might have you think first that your system hang up, but you will realize that your ThinkPad works and you can even reset it via {{key|Ctrl}}{{key|Alt}}{{key|Del}}.

==Affected Models==
*ThinkPad {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*Thinkpad {{T23}}
*ThinkPad {{X21}}, {{X30}}, {{X31}}, {{X40}}, {{X41}}
*ThinkPad {{R31}}, {{R50e}}{{footnote|1}}, {{R50p}}, {{R51}} (with BIOS 1.11), {{R52}}
*ThinkPad {{A30p}}
*ThinkPad {{390X}} (doesn't wake up; LCD backlight on, harddrive light remains on)
*ThinkPad {{Z60t}}, {{Z60m}}

==Affected Operating Systems==
*Linux (it's a kernel issue)

==Solutions==
===Solution for ThinkPads with 1400x1050 internal LCD and Intel 915GM ===
see [[1400x1050 on Intel 915GM]].
===Solution for ThinkPads with ATI graphic chips (or Intel 915GM)===
One solution may be to provide the {{bootparm|acpi_sleep|s3_bios}} kernel parameter in your kernel parameter line.

For grub this can look like this:

title Linux, kernel 2.6.11-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.11-1-686 root=/dev/hda1 ro acpi_sleep=s3_bios
initrd /boot/initrd.img-2.6.11-1-686
savedefault
boot

For lilo it can look like this:

image=/boot/vmlinuz
append="acpi_sleep=s3_bios"

The actual process of going to sleep is then managed through a sleep script; as a start, see the {{path|sleep.sh}} script in the Extreme Graphics 2 section below, but note the following comments:

In ||OpenSuse 10.1]] (at least on a T43p) it's needed to override default options of s2ram if you use the newer ATI driver. It can be done putting SUSPEND2RAM_FORCE="yes" and SUSPEND2RAM_ACPI_SLEEP="3" in /etc/powersave/sleep.

In {{Ubuntu}} or {{Kubuntu}}, it may be necessary to modify {{path|/etc/default/acpi-support}}. In that file, make sure that {{path|ACPI_SLEEP}} is uncommented and set to true. With ATI chips, also make sure that {{path|SAVE_VBE_STATE}} is uncommented and set to true; with Intel chips, on the other hand, ensure that nothing is done with respect to VBE--no reposts, no state saves.

In {{Fedora}}, it may be necessary with Intel chips to edit the {{path|resume_video()}} function in {{path|/etc/pm/functions-intel}}, by commenting out the VBE post and restore. Furthermore, the laptop, after waking up, may go back to sleep whenever the AC adapter is disconnected. When this happens, it is caused by a bug in the HAL daemon that incorrectly reports the lid as closed ({{path|lshal}} returns {{bootparm|button.state.value|true}}, among other things). The simplest way to resolve this is to add a line to the sleep script to restart the HAL daemon ''before'' sleeping the machine:

# restart the HAL daemon
service haldaemon restart

If you do this, it will unfortunately crash {{path|gnome-power-manager}}, if you use that, though it can be restarted manually.

{{NOTE|It is possible this method will not work if the laptop is docked.}}

Another solution is to use vbetool. If you are using {{Debian}} with the hibernate package, uncomment "EnableVbetool yes" in {{path|/etc/hibernate/hibernate.conf}} (or {{path|/etc/hibernate/ram.conf}}).

===Solution for ThinkPads with Intel Extreme Graphics 2===
{{NOTE|
On [[:Category:X40|X40]]s/[[:Category:X41|X41]]s - even with Intel Extreme Graphics - and for [[:Category:R52|R52]]s with Intel Graphics Media Accelerator 900 the [[Problem with display remaining black after resume#Solution for ThinkPads with ATI graphic chips|solution for ATI graphics chips]] above is reported to work. In this case, make sure no changes to VBE are made, especially no state saves and no reposts.}}

The following solution should work on 865G, 865GV, 855GM, 855GME, 852GME chipsets.
*First of all, '''do not''' use the {{bootparm|acpi_sleep|s3_bios}} kernel parameter.
*Second, completely remove framebuffer support from your kernel. If it's built as modules, it is important that they do not get loaded at all.
*Before suspending, change to a console and safe the video state with {{cmdroot|cat /proc/bus/pci/00/02.0 > /tmp/video_state}}.
*On resume, restore the video state with {{cmdroot|cat /tmp/video_state > /proc/bus/pci/00/02.0}} and change back to X.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

# change to console 1
FGCONSOLE=`fgconsole`
chvt 6

# safe video state
cat /proc/bus/pci/00/02.0 > /tmp/video_state

# sync filesystem
sync

# sync hardware clock with system time
hwclock --systohc

# go to sleep
echo -n 3 > /proc/acpi/sleep

# waking up
# restore system clock
hwclock --hctosys

# restore video state
cat /tmp/video_state > /proc/bus/pci/00/02.0

# change back to X
chvt $FGCONSOLE

# clean up behind us
rm /tmp/video_state

===Solution for ThinkPads with Intel I830 Chipset===
The following solution worked for me on an X30 with I830M chipset with kernel >= 2.6.16.
*this works with vesafb and also with intelfb frambuffer support.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

FGCONSOLE=`fgconsole`
chvt 8
sync
hwclock --systohc

echo -n "mem" > /sys/power/state

hwclock --hctosys
vbetool post

if [ "$FGCONSOLE" -ge "7" ] ; then
chvt $FGCONSOLE
else
chvt 7
chvt $FGCONSOLE
fi

{{footnotes|
#If you have this problem with R50e and the above solution doesn't work, try switching to console first. An example sleep script can be found [[How to configure acpid|here]].
}}

Problem with display remaining black after resume

2006-05-14T19:34:30Z

Gsu:

There has been a problem encountered where the display stays black on resuming from suspend.

The symptom might have you think first that your system hang up, but you will realize that your ThinkPad works and you can even reset it via {{key|Ctrl}}{{key|Alt}}{{key|Del}}.

==Affected Models==
*ThinkPad {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*Thinkpad {{T23}}
*ThinkPad {{X21}}, {{X30}}, {{X31}}, {{X40}}, {{X41}}
*ThinkPad {{R31}}, {{R50e}}{{footnote|1}}, {{R50p}}, {{R51}} (with BIOS 1.11), {{R52}}
*ThinkPad {{A30p}}
*ThinkPad {{390X}} (doesn't wake up; LCD backlight on, harddrive light remains on)
*ThinkPad {{Z60t}}, {{Z60m}}

==Affected Operating Systems==
*Linux (it's a kernel issue)

==Solutions==
===Solution for ThinkPads with 1400x1050 internal LCD and Intel 915GM ===
see [[1400x1050 on Intel 915GM]].
===Solution for ThinkPads with ATI graphic chips (or Intel 915GM)===
One solution may be to provide the {{bootparm|acpi_sleep|s3_bios}} kernel parameter in your kernel parameter line.

For grub this can look like this:

title Linux, kernel 2.6.11-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.11-1-686 root=/dev/hda1 ro acpi_sleep=s3_bios
initrd /boot/initrd.img-2.6.11-1-686
savedefault
boot

For lilo it can look like this:

image=/boot/vmlinuz
append="acpi_sleep=s3_bios"

The actual process of going to sleep is then managed through a sleep script; as a start, see the {{path|sleep.sh}} script in the Extreme Graphics 2 section below, but note the following comments:

In ||OpenSuse 10.1|| (at least on a T43p) it's needed to override default options of s2ram if you use the newer ATI driver. It can be done putting SUSPEND2RAM_FORCE="yes" and SUSPEND2RAM_ACPI_SLEEP="3" in /etc/powersave/sleep.

In {{Ubuntu}} or {{Kubuntu}}, it may be necessary to modify {{path|/etc/default/acpi-support}}. In that file, make sure that {{path|ACPI_SLEEP}} is uncommented and set to true. With ATI chips, also make sure that {{path|SAVE_VBE_STATE}} is uncommented and set to true; with Intel chips, on the other hand, ensure that nothing is done with respect to VBE--no reposts, no state saves.

In {{Fedora}}, it may be necessary with Intel chips to edit the {{path|resume_video()}} function in {{path|/etc/pm/functions-intel}}, by commenting out the VBE post and restore. Furthermore, the laptop, after waking up, may go back to sleep whenever the AC adapter is disconnected. When this happens, it is caused by a bug in the HAL daemon that incorrectly reports the lid as closed ({{path|lshal}} returns {{bootparm|button.state.value|true}}, among other things). The simplest way to resolve this is to add a line to the sleep script to restart the HAL daemon ''before'' sleeping the machine:

# restart the HAL daemon
service haldaemon restart

If you do this, it will unfortunately crash {{path|gnome-power-manager}}, if you use that, though it can be restarted manually.

{{NOTE|It is possible this method will not work if the laptop is docked.}}

Another solution is to use vbetool. If you are using {{Debian}} with the hibernate package, uncomment "EnableVbetool yes" in {{path|/etc/hibernate/hibernate.conf}} (or {{path|/etc/hibernate/ram.conf}}).

===Solution for ThinkPads with Intel Extreme Graphics 2===
{{NOTE|
On [[:Category:X40|X40]]s/[[:Category:X41|X41]]s - even with Intel Extreme Graphics - and for [[:Category:R52|R52]]s with Intel Graphics Media Accelerator 900 the [[Problem with display remaining black after resume#Solution for ThinkPads with ATI graphic chips|solution for ATI graphics chips]] above is reported to work. In this case, make sure no changes to VBE are made, especially no state saves and no reposts.}}

The following solution should work on 865G, 865GV, 855GM, 855GME, 852GME chipsets.
*First of all, '''do not''' use the {{bootparm|acpi_sleep|s3_bios}} kernel parameter.
*Second, completely remove framebuffer support from your kernel. If it's built as modules, it is important that they do not get loaded at all.
*Before suspending, change to a console and safe the video state with {{cmdroot|cat /proc/bus/pci/00/02.0 > /tmp/video_state}}.
*On resume, restore the video state with {{cmdroot|cat /tmp/video_state > /proc/bus/pci/00/02.0}} and change back to X.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

# change to console 1
FGCONSOLE=`fgconsole`
chvt 6

# safe video state
cat /proc/bus/pci/00/02.0 > /tmp/video_state

# sync filesystem
sync

# sync hardware clock with system time
hwclock --systohc

# go to sleep
echo -n 3 > /proc/acpi/sleep

# waking up
# restore system clock
hwclock --hctosys

# restore video state
cat /tmp/video_state > /proc/bus/pci/00/02.0

# change back to X
chvt $FGCONSOLE

# clean up behind us
rm /tmp/video_state

===Solution for ThinkPads with Intel I830 Chipset===
The following solution worked for me on an X30 with I830M chipset with kernel >= 2.6.16.
*this works with vesafb and also with intelfb frambuffer support.
The following example {{path|/etc/acpi/actions/sleep.sh}} script shows how to integrate the according lines.

#!/bin/bash

FGCONSOLE=`fgconsole`
chvt 8
sync
hwclock --systohc

echo -n "mem" > /sys/power/state

hwclock --hctosys
vbetool post

if [ "$FGCONSOLE" -ge "7" ] ; then
chvt $FGCONSOLE
else
chvt 7
chvt $FGCONSOLE
fi

{{footnotes|
#If you have this problem with R50e and the above solution doesn't work, try switching to console first. An example sleep script can be found [[How to configure acpid|here]].
}}