ThinkWiki - User contributions [en]

Ultrabay Enhanced DVD Multi-Burner Plus

2005-09-30T12:16:32Z

84.191.159.226: /* Supported with */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim DVD Multi-Burner Plus===
This is an DVD Writer for the Ultrabay Slim

=== Features ===
* Read capabilities
** CD-ROM
** DVD-ROM
* Write capabilities
** CD-R (24x)
** CD-RW (10x)
** DVD-R (8x)
** DVD-RW (4x)
** DVD-RAM
** DVD+R (8x)
** DVD+RW (4x)

</div>
|style="vertical-align:top" |
|}

=== IBM Partnumbers ===
Order PN: 73P3312

=== Linux Support ===
If connected at boot time, the drive is /dev/hdc

=== Supported with ===
* ThinkPad {{R50}}, {{R50p}}, {{R51}}, {{R52}}
*ThinkPad {{Z60m}}

[[Category:Components]]

Ultrabay Enhanced CD-RW/DVD-ROM Combo Drive V

2005-09-30T12:16:18Z

84.191.159.226: /* Supported with */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim CD-RW/DVD-ROM Combo Drive ===
This is an CD-RW/DVD-ROM Combo Drive for the Ultrabay Slim

=== Features ===
* Read capabilities
** CD-ROM (24x)
** DVD-ROM (8x)
* Write capabilities
** CD-R (24x)
** CD-RW (24x)

</div>
|style="vertical-align:top" |
|}

=== IBM Partnumbers ===
Order PN: 73P3275

=== Linux Support ===
If connected at boot time, the drive is /dev/hdc

=== Supported with ===
*ThinkPad {{R50}}, {{R50p}}, {{R51}}, {{R52}}
*ThinkPad {{Z60m}}

[[Category:Components]]

Ultrabay Slim Battery

2005-09-30T12:15:59Z

84.191.159.226:

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim Battery ===
This is a battery that slides into a supported Ultrabay Slim

=== Features ===
* 10.8V Lithium-Ion
* Capacity: 1.5Ah
* Weight: 280g (0.48 lbs)
* Charge time: 2.8 to 4.0 h
* Up to 8 hours of battery life on select systems in combination with main battery

</div>
|style="vertical-align:top" |
|}

=== IBM Partnumbers ===
Order PN: 08K8190

=== Linux Support ===
Second battery is correctly detected by either the APM or ACPI subsystem

=== Supported with ===
*ThinkPad {{T40}}, {{T40p}}, {{T41}}, {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*ThinkPad {{Z60t}}

=== NOT supported with ===
*[[UltraBase X4]], [[ThinkPad X4 Dock]]

=== A note on capacity ===
The capacity of this battery is 1.5Ah. For comparison, in the ThinkPad T40 series, the 6-cell system battery has a capacity of 4.8Ah and the 9-cell system battery holds 7.2Ah. Thus, the UltraBay battery provides only a small improvement in total charge capacity. However, it makes it possible to swap the system battery without the need to reboot, hibernate or use an external power adapter.

[[Category:Components]]

Ultrabay Slim PATA HDD Adapter

2005-09-30T12:15:17Z

84.191.159.226: /* Supported with */

Talk:Ultrabay Slim Multi-Burner Plus Drive

2005-09-30T12:14:54Z

84.191.159.226:

Hei,

i don't like the idea of including large scale pictures for everything. While i can see the benefits of it, i think it wastes too much server space.

I want to ask for other peoples opinions here. I'd recommend including only small scale pictures comparable in size and style to the ones included in the model categories or like on the UltraBay Plus Devices pages.

What's other peoples opinions?

[[User:84.191.159.226|84.191.159.226]] 14:14, 30 Sep 2005 (CEST)
----

Ultrabay Slim DVD Multi-Burner Plus

2005-09-30T12:10:11Z

84.191.159.226: /* Supported with */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim DVD Multi-Burner Plus===
This is an DVD Writer for the Ultrabay Slim. The label on the drive reads "DVD MULTI +".

=== Features ===
* Read capabilities
** CD-ROM
** DVD-ROM
* Write capabilities
** CD-R (24x)
** CD-RW (10x)
** DVD-R (2x)
** DVD-RW (2x)
** DVD-RAM
** DVD+R (2.4x)
** DVD+RW (2.4x)

</div>
|style="vertical-align:top" |
|}

*[http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-58635 IBMs product overview page for this drive]

==== Actual Drives ====
* Matshita UJ-822S

=== IBM Partnumbers ===
* Order PN: 73P3342
* FRU PN: 39T2507
* ASM PN: 39T2570

=== Linux Support ===
If connected at boot time, the drive is {{path|/dev/hdc}}.

=== Supported with ===
*ThinkPad {{T40}}, {{T40p}}, {{T41}}, {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*ThinkPad {{Z60t}}
*[[UltraBase X4]], [[ThinkPad X4 Dock]]

=== Pictures ===
[[Image:DVDMultiPlus-closed.jpg]]

[[Image:DVDMultiPlus-open.jpg]]

[[Category:Components]]

Ultrabay Slim DVD Multi-Burner

2005-09-30T12:09:29Z

84.191.159.226: /* Supported with */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim DVD Multi-Burner ===
This is a DVD Writer for the Ultrabay Slim.

=== Features ===
* Read capabilities
** CD-ROM, CD-R (24x)
** CD-RW (12x)
** DVD-ROM single layer (8x)
** DVD-ROM dual layer (6x)
** DVD-R, DVD-RW (4x)
** DVD-RAM (2x)
** DVD+R, DVD+RW (4x)
* Write capabilities
** CD-R (16x)
** CD-RW (8x)
** DVD-R (2x)
** DVD-RW (2x)
** DVD-RAM (2x)
*Access Speed: 130 ms (CD-ROM) / 150 ms (DVD-ROM, DVD-RAM)
*2 MB Buffer
*Weight: 210g (0.46 lbs)

==== Actual Drives ====
* Matshita UJ-812

</div>
*[http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-55186 IBMs product overview page for this drive]
|}

=== IBM Partnumbers ===
*Marketing PN: 73P3294
*FRU PN: 92P6110
=== Firmware update ===
Official Firmware update: [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MIGR-57083 version K104]

=== Linux Support ===
If connected at boot time, the drive is {{path|/dev/hdc}}.

=== Supported with ===
*ThinkPad {{T40}}, {{T40p}}, {{T41}}, {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*ThinkPad {{Z60t}}
*[[UltraBase X4]], [[ThinkPad X4 Dock]]

[[Category:Components]]

Ultrabay Slim CD-RW/DVD-ROM Combo Drive II

2005-09-30T12:09:06Z

84.191.159.226: /* Supported with */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim CD-RW/DVD-ROM Combo II Drive ===
This is an CD-RW/DVD-ROM Combo Drive for the Ultrabay Slim.

=== Features ===
* Read capabilities
** CD-ROM (24x)
** DVD-ROM single layer (8x)
** DVD-ROM dual layer (4x)
** DVD-R, DVD-RW (4x)
** DVD-RAM (2x)
* Write capabilities
** CD-R (24x)
** CD-RW (24x)
*Access Speed: 110 ms (CD-ROM) / 130 ms (DVD)
*2 MB Buffer
*Buffer underrun protection
*Weight: 210g (0.46 lbs)
====Actual Drives====
* Matshita UJDA755y (PCC)

</div>
[http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-54330 IBMs product overview page for this drive]
|}

=== IBM Partnumbers ===
*Marketing PN: 73P3288
*FRU PN: 13N6771 (PCC), 13N6769 (Hitachi)

=== Linux Support ===
If connected at boot time, the drive is {{path|/dev/hdc}}.

=== Supported with ===
*ThinkPad {{T40}}, {{T40p}}, {{T41}}, {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*ThinkPad {{Z60t}}
*[[UltraBase X4]], [[ThinkPad X4 Dock]]

[[Category:Components]]

Ultrabay Slim CD-RW/DVD-ROM Combo Drive

2005-09-30T12:08:53Z

84.191.159.226: /* Supported with */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim CD-RW/DVD-ROM Combo Drive ===
This is an CD-RW/DVD-ROM Combo Drive for the Ultrabay Slim.

==== Features ====
* Read capabilities
** CD-ROM (24x)
** DVD-ROM (8x)
* Write capabilities
** CD-R (16x)
** CD-RW (10x)
*Access Speed: 150 ms (CD-ROM) / 170 ms (DVD)
*2 MB Buffer
*Weight: 210g (0.46 lbs)

====Actual Drives====
*Toshiba SD-R9012

</div>
*[http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46427 IBMs product overview page for this drive]
|}

=== IBM Partnumbers ===
*Marketing PN: 22P7011
*FRU PN: 08K9865, 62P4556, 92P6581 (KME), 92P5993 (Toshiba)

=== Linux Support ===
If connected at boot time, the drive is {{path|/dev/hdc}}.

=== Supported with ===
*ThinkPad {{T40}}, {{T40p}}, {{T41}}, {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*ThinkPad {{Z60t}}
*[[UltraBase X4]], [[ThinkPad X4 Dock]]

[[Category:Components]]

Ultrabay Slim DVD-ROM Drive

2005-09-30T12:08:37Z

84.191.159.226: /* Supported with */

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== Ultrabay Slim DVD-ROM Drive ===
This is an DVD Reader for the Ultrabay Slim

=== Features ===
* Read capabilities
** CD-ROM
** DVD-ROM (8x)

</div>
|style="vertical-align:top" |
|}

=== IBM Partnumbers ===
Order PN: 73P3270

=== Linux Support ===
If connected at boot time, the drive is {{path|/dev/hdc}}.

=== Supported with ===
*ThinkPad {{T40}}, {{T40p}}, {{T41}}, {{T41p}}, {{T42}}, {{T42p}}, {{T43}}, {{T43p}}
*ThinkPad {{Z60t}}
*[[UltraBase X4]], [[ThinkPad X4 Dock]]

[[Category:Components]]

How to install wpa supplicant

2005-09-30T12:00:12Z

84.191.159.226: /* Bringing up the network card manually */

=== Installing wpa_supplicant ===
*Get the [http://hostap.epitest.fi/wpa_supplicant/ source]
*Edit the {{path|.config}} file in the source directory according to your wlan driver (see driver section)

#
#.config
#
# Uncomment following two lines and fix the paths if you have installed openssl
# in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
CFLAGS += -I../madwif
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
#CONFIG_DRIVER_WIRED=y
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# LEAP
CONFIG_EAP_LEAP=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y

* install wpa_supplicant by {{cmdroot|make && make install}}

=== Configuration ===

==== For WPA-PSK ====
*Edit {{path|wpa_supplicant.conf}}:

#
#wpa_supplicant.conf
#
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
# ap_scan=2 was the one for me you may try 0 or 1 indstead of 2
ap_scan=2
fast_reauth=1
network={
ssid=""
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
psk=
}

You have to change the values according to the response of {{cmdroot|wpa_passphrase <yourAPssid> <yourpassphrase>}}.

=== Starting wpa_supplicant ===
Make sure that the modules <tt>ath_pci</tt>, <tt>ath_hal</tt>, <tt>ath_rate_sample</tt>, <tt>wlan</tt>, <tt>wlan_tkip</tt> and <tt>wlan_xauth</tt> are loaded (using {{cmdroot|lsmod}}).

Now you are able to start wpa_supplicant by
:{{cmdroot|wpa_supplicant -d -c/etc/wpa_supplicant.conf -iath0 -Dmadwifi}}
If every thing works as expected, you can replace <tt>-d</tt> by <tt>-B</tt> for the deamon mode.

====Bringing up the network card manually====
*Bring up the network interface with {{cmdroot|ifconfig ath0 <yourip> up}}.
{{NOTE|1=At the moment there is a problem within the madwifi driver or wpa_supplicant passing dhcp. ThatÂ´s why I use a fixed IP.
There are two patches one for wpa_supllicant (http://hostap.epitest.fi/bugz/show_bug.cgi?id=63) and one for madwifi
(http://article.gmane.org/gmane.linux.drivers.madwifi.devel/1275). Each one is supposed to work.}}
*Change the routes and add the default gateway.

====Bringing up the device at boottime (for {{Gentoo}} users)====
*Make a symbolic link
:{{cmdroot|cd /etc/init.d/}}
:{{cmdroot|ln -s net.lo net.ath0}}
*Copy {{path|wpa_supplicant.conf}} to {{path|/etc/conf.d/wpa_supplicant}}.
*Edit {{path|/etc/conf.d/net}}

#
#net
#
wpa_supplicant_ath0="-Dmadwifi"
wpa_timeout_ath0=60
config_ath0=("<yourip> netmask 255.255.255.0")
routes_ath0=("default gw <yourgateway>")

*Add net.ath0 to the default runlevel by executing
:{{cmdroot|rc-update add net.ath0 default}}
*Make sure all needed modules are in {{path|/etc/modules.autoloa.d/2.x}}

=== External Sources ===
*[http://hostap.epitest.fi/wpa_supplicant/ wpa_supplicant] source
*[http://www.linux-wireless.org/ linux-wireless] Wireless HOWTOs
*[http://rinta-aho.org/docs/wlan/wlan.html EAP-TLS] setting up WLAN network with EAP-TLS

How to install wpa supplicant

2005-09-30T11:59:27Z

84.191.159.226: /* Bringing up the network card manually */

=== Installing wpa_supplicant ===
*Get the [http://hostap.epitest.fi/wpa_supplicant/ source]
*Edit the {{path|.config}} file in the source directory according to your wlan driver (see driver section)

#
#.config
#
# Uncomment following two lines and fix the paths if you have installed openssl
# in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
#CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
CONFIG_DRIVER_MADWIFI=y
# Change include directories to match with the local setup
CFLAGS += -I../madwif
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
#CONFIG_DRIVER_WIRED=y
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5 (automatically included if EAP-TTLS is enabled)
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# LEAP
CONFIG_EAP_LEAP=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Include control interface for external programs, e.g, wpa_cli
CONFIG_CTRL_IFACE=y

* install wpa_supplicant by {{cmdroot|make && make install}}

=== Configuration ===

==== For WPA-PSK ====
*Edit {{path|wpa_supplicant.conf}}:

#
#wpa_supplicant.conf
#
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
# ap_scan=2 was the one for me you may try 0 or 1 indstead of 2
ap_scan=2
fast_reauth=1
network={
ssid=""
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
psk=
}

You have to change the values according to the response of {{cmdroot|wpa_passphrase <yourAPssid> <yourpassphrase>}}.

=== Starting wpa_supplicant ===
Make sure that the modules <tt>ath_pci</tt>, <tt>ath_hal</tt>, <tt>ath_rate_sample</tt>, <tt>wlan</tt>, <tt>wlan_tkip</tt> and <tt>wlan_xauth</tt> are loaded (using {{cmdroot|lsmod}}).

Now you are able to start wpa_supplicant by
:{{cmdroot|wpa_supplicant -d -c/etc/wpa_supplicant.conf -iath0 -Dmadwifi}}
If every thing works as expected, you can replace <tt>-d</tt> by <tt>-B</tt> for the deamon mode.

====Bringing up the network card manually====
*Bring up the network interface with {{cmdroot|ifconfig ath0 <yourip> up}}.
{{NOTE|At the moment there is a problem within the madwifi driver or wpa_supplicant passing dhcp. ThatÂ´s why I use a fixed IP.
There are two patches one for wpa_supllicant (http://hostap.epitest.fi/bugz/show_bug.cgi?id=63) and one for madwifi
(http://article.gmane.org/gmane.linux.drivers.madwifi.devel/1275). Each one is supposed to work.}}
*Change the routes and add the default gateway.

====Bringing up the device at boottime (for {{Gentoo}} users)====
*Make a symbolic link
:{{cmdroot|cd /etc/init.d/}}
:{{cmdroot|ln -s net.lo net.ath0}}
*Copy {{path|wpa_supplicant.conf}} to {{path|/etc/conf.d/wpa_supplicant}}.
*Edit {{path|/etc/conf.d/net}}

#
#net
#
wpa_supplicant_ath0="-Dmadwifi"
wpa_timeout_ath0=60
config_ath0=("<yourip> netmask 255.255.255.0")
routes_ath0=("default gw <yourgateway>")

*Add net.ath0 to the default runlevel by executing
:{{cmdroot|rc-update add net.ath0 default}}
*Make sure all needed modules are in {{path|/etc/modules.autoloa.d/2.x}}

=== External Sources ===
*[http://hostap.epitest.fi/wpa_supplicant/ wpa_supplicant] source
*[http://www.linux-wireless.org/ linux-wireless] Wireless HOWTOs
*[http://rinta-aho.org/docs/wlan/wlan.html EAP-TLS] setting up WLAN network with EAP-TLS