ThinkWiki - User contributions [en]

Intel Mobile Pentium III

2005-08-02T17:37:02Z

84.191.145.209:

==General Information==

==Available Tact Rates==
{| cellspacing=2 cellpadding=5
|- style="text-align:right; background-color:black; color:white;"
! style="text-align:left;padding-right:10px;" | max. Processor tact (MHz)
| 450 || 500 || 600 || 650 || 700 || 750 || 800 || 850 || 866 || 900 || 933 || 1000 || 1133 || 1200
|- style="text-align:right; background-color:#898989; color:white;"
! style="text-align:left;padding-right:10px;" | min. Processor tact (MHz)
| 450 || 500 || 500 || 500 || 500 || 500? || 500? || 500 || 667 || 700? || 733 || 733 || 733 || 733?
|- style="text-align:right; background-color:#dddddd; color:black;"
! style="text-align:left; padding-right:10px;" | Bus tact (MHz)
| 100 || 100 || 100 || 100 || 100 || 100 || 100 || 100 || 133 || 100 || 133 || 100/133 || 133 || 133
|}

==Thermal Specifications==

==GCC Optimization Flags==

==ThinkPads driven by this Processor==
*ThinkPad {{240X}}
*ThinkPad {{390X}}
*ThinkPad {{570E}}
*ThinkPad {{600X}}
*ThinkPad {{A20m}}, {{A20p}}, {{A21m}}, {{A21p}}, {{A22e}}, {{A22m}}, {{A22p}}
*ThinkPad {{i1124}}, {{i1200}}, {{i1300}}, {{i1483}}, {{i1492}}, {{i1562}}, {{i1592}}, {{i1620}}
*ThinkPad {{R30}}, {{R31}}
*ThinkPad {{S30}}, {{S31}}
*ThinkPad {{T20}}, {{T21}}, {{T22}}, {{T23}}
*ThinkPad {{X20}}, {{X21}}, {{X22}}, {{X23}}, {{X24}}
*ThinkPad {{TransNote}}

[[Category:Glossary]]

Intel Mobile Pentium III

2005-08-02T17:25:53Z

84.191.145.209:

Processors

2005-08-02T14:32:34Z

84.191.145.209:

''This is a stub so far. It's supposed to give general info about processors found in ThinkPads and possibly link to single processor pages. The single processor pages can give general information about the specific type and the ThinkPads it can be found in as well as contain information about thermal limits, compiler optimization options, etc...''

==General information==
TODO...

==Processors found in ThinkPads==
*Intel
**[[Intel 386]]
**[[Intel 486]]
**[[Intel Celeron]]
**[[Intel Pentium]]
**[[Intel Pentium MMX]]
**[[Intel Mobile Pentium II]]
**[[Intel Mobile Pentium III]]
**[[Intel Pentium 4]]
**[[Intel Pentium 4-M]]
**[[Intel Pentium M]]
*Others
**[[Cyrix Cx486]]
**[[IBM Blue Lightning 486]]
**[[IBM PowerPC 603e]]
**[[Transmeta Crusoe]]

How to install the IBM Ultracam II driver

2005-08-02T06:08:58Z

84.191.145.209:

1. First you have to get the [[Ultracampatch | kernel patch for the ultracam]].

: The patch is for Kernel 2.4.20, so if you are using any other 2.4 series kernel you might have to adjust the patch to work.
: On 2.6 the structure of the usb source tree changed a lot, a patch is available for 2.6.10 at: http://marc.theaimsgroup.com/?l=linux-usb-devel&m=111802180804300&w=4

2. Change to the drivers directory in the kernel source tree: {{cmdroot|cd /lib/modules/`uname -r`/build/drivers}}

3. Apply the patch: {{cmdroot|patch -p0 -i <path to saved patch-file>}}
: If the patch was successful, you should see the following:
patching file usb/Config.in
patching file usb/Makefile
patching file usb/ultracam.c
patching file usb/usbvideo.c

4. Go up one level to the kernel source root: {{cmdroot|cd ..}}

5. Configure the kernel: {{cmdroot|make menuconfig}}

6. Activate the following Options as modules (set to <M>):
{{kernelconf|||Device Drivers|Multimedia devices|Video For Linux|<M>|}}
{{kernelconf|||Device Drivers|USB support|Support for USB|<M>|}}
{{kernelconf|||Device Drivers|USB support|Preliminary USB device filesystem|[*]|}}
{{kernelconf|||Device Drivers|USB support|UHCI Alternate Driver (JE) support|<M>|}}
{{kernelconf|||Device Drivers|USB support|USB IBM Ultraport II Camera support|<M>|}}
: In case some of them should already be activated (<*> oder <M>), just let them as they are.
: Exit the configuration and save your settings.

7. Recompile the kernel modules: {{cmdroot|make dep && make modules modules_install && depmod -ae}}.

{{NOTE|If you are using non standard kernel modules they have to be recompiled afterwards as well.}}

8. Now you can do a {{cmdroot|modprobe ultracam}} and launch "xawtv".

If everything works, you should see yourself now. The driver is quite unstable and you might have to unload and reload the ultracam module every now and then.

[[Category:A20m]] [[Category:A20p]] [[Category:A21e]] [[Category:A21m]] [[Category:A21p]] [[Category:A22e]] [[Category:A22m]] [[Category:A22p]] [[Category:T20]] [[Category:T21]] [[Category:T22]] [[Category:T23]] [[Category:X20]] [[Category:X21]] [[Category:X22]] [[Category:X23]] [[Category:X24]]

UltraPort Digital Array Microphone

2005-08-02T06:06:45Z

84.191.145.209:

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
[[image:Ultraport-microphone.png|IBM UltraPort Digital Array Microphone]]
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== IBM UltraPort Digital Array Microphone ===
This is a stereo Microphone for the IBM UltraPort. It can also be connected to any USB port by using the included cable.
=== Features ===
* Range of up to four feet
* Noise reduction and speech enhancement
* UltraPort and USB interfaces
</div>
|}
=== IBM Partnumbers ===
IBM FRU PN: 09N4178, 09N4180

=== Linux driver ===
The microphone should be supported by the usb-audio driver. However, this is not confirmed.

=== ThinkPads this addon is suitable for ===
* {{A20p}}, {{A21p}}, {{A22p}}, {{A30p}}, {{A31p}}
* {{T20}}, {{T21}}, {{T22}}, {{T23}}
* {{X20}}, {{X21}}, {{X22}}, {{X23}}, {{X24}}

[[Category:Components]]

UltraPort Infrared Adapter

2005-08-02T06:05:26Z

84.191.145.209:

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
[[image:Ultraport-irda.png|IBM UltraPort Infrared Adapter]]
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== IBM UltraPort Infrared Adapter ===
This is a Infrared Adapter for the IBM UltraPort. It can also be connected to any USB port by using the included cable.

This adapter is especially useful for {{X20}} and {{X21}} ThinkPads, since they are not equipped with IrDA ports by default.

=== Features ===
* Front to back swivel for greater infrared field of view
* Transfer rate up to 4 Mbps
* Maximum range up to 1 meter (3 feet)
* UltraPort and USB interfaces
</div>
|}
=== IBM Partnumbers ===
IBM FRU PN: 22P5272, 22P5274

=== Linux driver ===
This adapter works with the irda-usb driver of 2.6 type kernels. To enable it, follow these steps:

Enable USB support:
{{kernelconf|||Device Drivers|USB support|Support for Host-side USB|<M>|CONFIG_USB}}
{{kernelconf|||Device Drivers|USB support|USB device file system|[*]|CONFIG_USB_DEVICEFS}}

Choose an appropriate USB host driver, one of:
{{kernelconf|||Device Drivers|USB support|ECHI HCD (USB 2.0) support|<M>|CONFIG_USB_EHCI_HCD}}
{{kernelconf|||Device Drivers|USB support|UHCI HCD support|<M>|CONFIG_USB_UHCI}}
{{kernelconf|||Device Drivers|USB support|OHCI HCD support|<M>|CONFIG_USB_OHCI}}

Enable IrDA support:
{{kernelconf|||Device Drivers|Networking support|IrDA (infrared) subsystem support|<M>|CONFIG_IRDA}}
{{kernelconf||Device Drivers|Networking support|IrDA (infrared) subsystem support|IrLAN protocol|<M>|CONFIG_IRLAN}}
{{kernelconf||Device Drivers|Networking support|IrDA (infrared) subsystem support|IrNET protocol|<M>|CONFIG_IRNET}}
{{kernelconf||Device Drivers|Networking support|IrDA (infrared) subsystem support|IrCOMM protocol|<M>|CONFIG_IRCOMM}}

Finally, enable the irda-usb driver:
{{kernelconf|Device Drivers|Networking support|IrDA (infrared) subsystem support|Infrared-port device drivers|IrDA USB dongles|<M>|CONFIG_USB_IRDA}}

Compile your kernel with these options (don't forget {{cmdroot|depmod -ae}}) and reboot or just load the relevant modules (<tt>usb, usb-ehci/usb-uhci/usb-ohci, usb-storage, irda, irlan, irnet, ircomm, ircomm_tty, irda-usb</tt>). Attach the IrDA adapter to the UltraPort, if not done already.

Do a {{cmdroot|cat /proc/bus/usb/devices}} to asure yourself that your IrDA adapter is recognized by the USB subsystem.

=== ThinkPads this addon is suitable for ===
* {{A20p}}, {{A21p}}, {{A22p}}, {{A30p}}, {{A31p}}
* {{T20}}, {{T21}}, {{T22}}, {{T23}}
* {{X20}}, {{X21}}, {{X22}}, {{X23}}, {{X24}}

[[Category:Components]]

UltraPort Compact Flash Adapter

2005-08-02T05:27:15Z

84.191.145.209:

__NOTOC__
{| width="100%"
|style="vertical-align:top" |
[[image:Ultraport-cfreader.png|IBM UltraPort Compact Flash Adapter]]
|style="vertical-align:top" |
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
=== IBM UltraPort Compact Flash Adapter ===
This is a Compact Flash Card Reader for the IBM UltraPort. It can also be connected to any USB port by using the included cable.
=== Features ===
* Compatible with CF I, CF II and MicroDrive cards (3.3V and 5V)
* Transfer rates up to 900KB/s reading and up to 470KB/s writing
* UltraPort and USB interfaces
</div>
|}
=== IBM Partnumbers ===
IBM FRU PN: 19K4510

=== Linux driver ===
The Compact Flash Card Reader is accessable via the USB Mass Storage driver, just like a usual USB memory stick.

Since the USB Mass Storage driver is SCSI based you'll need SCSI support in your kernel. Enable the following options:

{{kernelconf|||Device Drivers|SCSI device support|SCSI device support|[M]|CONFIG_SCSI}}
{{kernelconf|||Device Drivers|SCSI device support|SCSI disk support|[M]|CONFIG_BLK_DEV_SD}}
{{kernelconf|||Device Drivers|SCSI device support|SCSI generic support|[M]|CONFIG_CHR_DEV_SG}}

Furthermore, enable USB support:
{{kernelconf|||Device Drivers|USB support|Support for Host-side USB|<M>|CONFIG_USB}}
{{kernelconf|||Device Drivers|USB support|USB device file system|[*]|CONFIG_USB_DEVICEFS}}

Choose an appropriate USB host driver, one of:
{{kernelconf|||Device Drivers|USB support|ECHI HCD (USB 2.0) support|<M>|CONFIG_USB_EHCI_HCD}}
{{kernelconf|||Device Drivers|USB support|UHCI HCD support|<M>|CONFIG_USB_UHCI}}
{{kernelconf|||Device Drivers|USB support|OHCI HCD support|<M>|CONFIG_USB_OHCI}}

Finally, enable the USB Mass Storage driver:
{{kernelconf|||Device Drivers|USB support|USB Mass Storage support|<M>|CONFIG_USB_STORAGE}}

{{NOTE|Make sure that the <tt>Low Performance USB Block Driver (BLK_DEV_UB)</tt> is disabled. It would prevent the whole thing from working correctly.}}

Compile your kernel with these options (don't forget {{cmdroot|depmod -ae}}) and reboot or just load the relevant modules (<tt>scsi, sd_mod, sg, usb, usb-ehci/usb-uhci/usb-ohci, usb-storage</tt>). If you didn't already, plug in the card reader and insert a CF card.

Do a {{cmdroot|cat /proc/bus/usb/devices}} to asure yourself that your card reader is recognized by the USB subsystem.

Now also check if the USB Mass Storage driver is working properly by doing a {{cmdroot|cat /proc/scsi/scsi}}.

Usually, your card reader will be associated with {{path|/dev/sda}} and hence it's first (and mostly only partition) will be {{path|/dev/sda1}}. You can check that using the [http://sg.torque.net/sg/index.html#Utilities:%20sg_utils%20and%20sg3_utils sg3_utils].

You may want to put an entry in your {{path|/etc/fstab}}, i.e. with the above assumtions:
/dev/sda1 /media/cf auto noauto,users 0 0

That's it. Your card reader should be working now.

=== ThinkPads this addon is suitable for ===
* {{A20p}}, {{A21p}}, {{A22p}}, {{A30p}}, {{A31p}}
* {{T20}}, {{T21}}, {{T22}}, {{T23}}
* {{X20}}, {{X21}}, {{X22}}, {{X23}}, {{X24}}

[[Category:Components]]

Template:Kernelconf

2005-08-02T04:56:30Z

84.191.145.209:

:<tt style="padding:3px;padding-top:0px;padding-bottom:0px;background-color:#eeeeee;white-space:nowrap;">{{ine|p1p2p3|{{{1}}}| → ||}}{{ine|p1p2p3|{{{2}}}| → ||}}{{ine|p1p2p3|{{{3}}}| → ||}}{{ine|p1p2p3|{{{4}}}| → ||}}{{ine|p1p2p3|{{{6}}}| ||}}{{{5}}}</tt> <tt>{{ine|p2p1p3|{{{7}}}|(|)|}}</tt>

Template:Kernelconf

2005-08-02T04:55:23Z

84.191.145.209:

Template:Kernelconf

2005-08-02T04:53:50Z

84.191.145.209:

Template:Kernelconf

2005-08-02T04:36:26Z

84.191.145.209: