Difference between revisions of "Ultrabay 2000 Battery"

From ThinkWiki
Jump to: navigation, search
(→‎Linux Support)
m (added minor info regarding incompatibility)
(9 intermediate revisions by 6 users not shown)
Line 3: Line 3:
 
|style="vertical-align:top" |
 
|style="vertical-align:top" |
 
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
 
<div style="margin: 0; margin-right:10px; border: 1px solid #dfdfdf; padding: 0em 1em 1em 1em; background-color:#F8F8FF; align:right;">
−
=== UltraBay 2000 Battery ===
+
=== Ultrabay 2000 Battery ===
−
This is a battery that slides into a supported UltraBay 2000.
+
This is a battery pack that slides into an Ultrabay 2000. Please note that not all Ultrabay 2000 or Plus bays are capable of using this battery pack, as some do not have the required power interfacing pins to use this.
  
 
=== Features ===
 
=== Features ===
−
* 10.8V Lithium-Ion
+
* 3.2Ah or 3.6Ah, 10.8V
−
* 9 cells
+
* 9 lithium-ion cells
 
* Up to 3 hours of battery life
 
* Up to 3 hours of battery life
−
* Weight: 268g (0.59 lbs)
+
* Charge time: 2 hours
−
* Charge time: 2.0 h
+
* Weight: 268 grams or 0.59 pounds
 
</div>
 
</div>
 
|style="vertical-align:top" |
 
|style="vertical-align:top" |
−
[[image:ultrabay2000battery.gif|UltraBay 2000 Battery]]
+
[[image:ultrabay2000battery.gif|Ultrabay 2000 battery]]
 
|}
 
|}
  
−
=== IBM Partnumbers ===
+
=== Part numbers ===
 +
 
 +
==== 3.2Ah, 10.8V, Sanyo ====
 +
 
 
*Marketing PN: 02K6646
 
*Marketing PN: 02K6646
 
*FRU PN: 02K6645
 
*FRU PN: 02K6645
  
−
=== Linux Support ===
+
==== 3.6Ah, 10.8V, Sanyo ====
−
The second battery is correctly detected by either the APM or ACPI subsystem. However, the Linux ACPI subsystem only scans for batteries on boot. This means that the second battery must be present at boot time, or you will not be able to get any info for it via {{path|/proc/acpi/battery/BAT1}}.
 
−
 
 
−
With kernel 2.6.14.2 (possibly only with [[ibm-acpi]]) there is a sysfs file: {{path|/sys/firmware/acpi/namespace/ACPI/_SB/PCI0/LPC/EC/BAT1/eject}}. There isn't one for BAT0, but {{cmdroot|cat /proc/acpi/battery/BAT0/*}} shows {{cmdresult|not present}} when there is no internal battery.
 
−
 
 
−
For BAT1 all the states go to 0, critical, etc. .
 
−
 
 
−
{{cmdroot|echo 1 > /sys/firmware/acpi/namespace/ACPI/_SB/PCI0/LPC/EC/BAT1/eject}} will remove {{path|/proc/acpi/battery/BAT1}} and turn off the UltraBay led. Interestingly the battery will still be discharging (charging not tested) until it is physically removed.
 
−
 
 
−
Also, if you compile the battery module of ACPI as a module, boot with the UltraBay battery present, remove the UltraBay battery (without doing the eject above), {{path|/proc/acpi/battery/BAT1}} is still there, while after {{cmdroot|rmmod battery && modprobe battery}} {{path|/proc/acpi/battery/BAT1}} is gone (BAT0 is back). Put the battery back in and {{path|/proc/acpi/battery/BAT1}} is still missing, do {{cmdroot|rmmod battery && modprobe battery}} and {{path|/proc/acpi/battery/BAT1}} is back.
 
−
 
 
−
If you boot without the second battery <tt>BAT1</tt> never appears in {{path|/proc}} or {{path|/sys}}.
 
−
 
 
−
If you eject using the sysfs file above, <tt>BAT1</tt> disappears from both {{path|/proc}} and {{path|/sys}} and never comes back.
 
−
 
 
−
Fortunately, the battery status is accessible independently of the ACPI system. The [[SMAPI support for Linux|tp_smapi]] module gives battery status (and other features) via the sysfs interface in {{path|/sys/devices/platform/smapi/BAT<nowiki>{</nowiki>0,1<nowiki>}</nowiki>}}. The BAT1 interface is always present, regardless of whether the battery is present, was present on boot, or was ejected using the sysfs interface above.
 
−
 
 
−
Unfortunately, all battery monitor scripts/applets currently use the ACPI interface to get battery status information.
 
  
−
Test machine: T23.
+
*Marketing PN: 02K6819
−
 
+
*FRU PN: 02K6817, 02K6818
−
=== Charging and discharging ===
 
  
 +
=== Usage and Linux support ===
 
See [[How to use UltraBay batteries]].
 
See [[How to use UltraBay batteries]].
  
 
=== Supported with ===
 
=== Supported with ===
−
*ThinkPad {{A20m}}, {{A20p}}, {{A21e}}, {{A21m}}, {{A21p}}, {{A22e}}, {{A22m}}, {{A22p}}, {{A30}}, {{A30p}}, {{A31}}, {{A31p}}
+
* {{A Series}}
−
*ThinkPad {{R30}}, {{R31}}, {{R32}}, {{R40}}
+
* {{T20}}, {{T21}}, {{T22}}, {{T23}}, {{T30}}
−
*ThinkPad  {{T20}}, {{T21}}, {{T22}}, {{T23}}, {{T30}}
+
* [[UltraBase X3]] with the {{X30}}, {{X31}}, {{X32}} docked
−
 
+
* {{R32}}, {{R40}}
  
 
[[Category:Components]]
 
[[Category:Components]]

Revision as of 12:50, 27 November 2019

Ultrabay 2000 Battery

This is a battery pack that slides into an Ultrabay 2000. Please note that not all Ultrabay 2000 or Plus bays are capable of using this battery pack, as some do not have the required power interfacing pins to use this.

Features

  • 3.2Ah or 3.6Ah, 10.8V
  • 9 lithium-ion cells
  • Up to 3 hours of battery life
  • Charge time: 2 hours
  • Weight: 268 grams or 0.59 pounds

Ultrabay 2000 battery

Part numbers

3.2Ah, 10.8V, Sanyo

  • Marketing PN: 02K6646
  • FRU PN: 02K6645

3.6Ah, 10.8V, Sanyo

  • Marketing PN: 02K6819
  • FRU PN: 02K6817, 02K6818

Usage and Linux support

See How to use UltraBay batteries.

Supported with

Retrieved from "https://www.thinkwiki.org/w/index.php?title=Ultrabay_2000_Battery&oldid=59370"