UltraBay II HDD Adapter

From ThinkWiki
Revision as of 19:28, 4 April 2020 by Bugmenot2 (Talk | contribs) (changed category)
Jump to: navigation, search

Ultrabay II HDD Adapter

This is an adapter to connect an additional HDD to the Ultrabay II


  • Takes any 700 series HDD's that are contained in a 770-style "sardine-tin" or a 760-style push-on HDD.
  • Can be used with any 2.5" HDD, if you gut a push-on HDD for the adapter.

IBM Partnumbers

  • 11J8941

Linux Support

If connected at boot time, the drive is /dev/sdb. Hotplugging between this & another non-IDE device works fine (the kernel doesn't realise it's disconnected), between this and DVD the kernel will recognise the new drive, but panic.

Supported with