Difference between revisions of "ThinkPad X200 UltraBase"

From ThinkWiki
Jump to: navigation, search
m (Features)
(Pros & Cons)
Line 21: Line 21:
  
 
===Pros & Cons===
 
===Pros & Cons===
* Positives: eases up portability of laptop, provides digital video output, provides option for optical drive, allows effective use of second battery
+
* Positives: eases up portability of laptop, provides digital video output, provides option for optical drive, allows effective use of second battery, allows to connect 2 external monitors (one via DisplayPort, second via VGA)
 
* Negatives: reduces cooling capabilities a bit (mainly HDD)
 
* Negatives: reduces cooling capabilities a bit (mainly HDD)
  

Revision as of 16:28, 7 October 2009

Lenovo X200 UltraBase

Here is some basic info about X200 UltraBase: portable dock for the X200-series ThinkPads (X200, X200s, X200 Tablet) providing extra ports (notably DisplayPort), Ultrabay Slim slot and an additional battery slot.

Features

  • Passthrough ports:
    • Gigabit Ethernet (RJ45)
    • VGA
    • Microphone
    • Headphone
    • AC
  • Additional ports:
    • 4 USB ports (1 on the right side, 3 on the back)
    • DisplayPort
  • Battery slot
  • Serial Ultrabay Slim
  • Kensington security hole
  • key lock to lock laptop to a docking station

Pros & Cons

  • Positives: eases up portability of laptop, provides digital video output, provides option for optical drive, allows effective use of second battery, allows to connect 2 external monitors (one via DisplayPort, second via VGA)
  • Negatives: reduces cooling capabilities a bit (mainly HDD)

DisplayPort support in Linux

Kernel support for DisplayPort in intel graphic chips using KMS (Kernel Mode Setting) was added by Keith Packard in version 2.6.31. On the userspace side driver version 2.7 or newer is required to use KMS. In order to activate it you need to pass modeset=1 parameter to i915 driver either at boot time or in your initramfs.

NOTE!
When passing module parameter at boot time you need to precede it's name by module name followed by a dot so in this case you would need to add i915.modeset=1 to your boot command line.
Hint:
To pass module parameter in initramfs simply add it to your modprobe configuration and update your initramfs with update-initramfs command.