Difference between revisions of "Talk:Problems with fglrx"

From ThinkWiki
Jump to: navigation, search
(fglrx 8.21.7 and kernel 2.6.15)
(8.20.8 does work fine with current Debian sid packages)
Line 3: Line 3:
 
Anyone know whether this makes a performance and/or stability difference?
 
Anyone know whether this makes a performance and/or stability difference?
  
== 8.20.8 does work fine with current Debian sid packages ==
+
== 8.20.8 and later works with current Debian sid packages ==
  
 
<pre>
 
<pre>
Line 73: Line 73:
 
Update - although X will come up in kernel 2.6.15 with the fglrx drivers patched as above, there is some strange behavior exhibited in all of X apllications - frequent hanging of applications when closing windows.  Reverting back to the radeon driver in 2.6.15 solves these - so it is likely the ATI proprietary driver causing some problems.
 
Update - although X will come up in kernel 2.6.15 with the fglrx drivers patched as above, there is some strange behavior exhibited in all of X apllications - frequent hanging of applications when closing windows.  Reverting back to the radeon driver in 2.6.15 solves these - so it is likely the ATI proprietary driver causing some problems.
  
Yet another update - fglrx 8.21.7 is out as of 1/19/2006, now supporting OpenGL 2.0, so eventually we will have beautiful complex shading / fog effects on Linux, too.  Unfortunately, this gives the same problems when used (unpatched) with kernel 2.6.15 with strange lockups occasionally requiring reset of X.  I have not tried this with the ~10 line patch listed on the main site, but that patch not work for me with 8.20.6.  Anybody else have experience with 2.6.15 and fglrx?
+
Yet another update - fglrx 8.21.7 is out as of 1/19/2006, now supporting OpenGL 2.0, so eventually we will have beautiful complex shading / fog effects on Linux, too.  It works well with X.Org 6.9 out of the box.
 +
 
 +
Unfortunately, this version gives the same problems when used (unpatched) with kernel 2.6.15 with strange lockups occasionally requiring reset of X.  I have not tried this with the ~10 line patch listed on the main site, but that patch not work for me with 8.20.6.  Anybody else have experience with 2.6.15 and fglrx?
  
 
--[[User:gsmenden|gsmenden]] 12:39, 20 Jan 2006 (EST)
 
--[[User:gsmenden|gsmenden]] 12:39, 20 Jan 2006 (EST)

Revision as of 06:05, 21 January 2006

using kernel AGP vs fglrx AGP

Anyone know whether this makes a performance and/or stability difference?

8.20.8 and later works with current Debian sid packages

spiney@t43p:~$ dpkg -l xserver-xorg
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name                         Version                      Description
+++-============================-============================-==================
ii  xserver-xorg                 6.9.0.dfsg.1-2               the X.Org X server
spiney@t43p:~$ fglrxinfo 
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY FireGL V3200 Pentium 4 (SSE2) (FireGL) (GNU_ICD)
OpenGL version string: 1.3.5519 (X4.3.0-8.20.8)

--spiney


Ahh - thanks for the info. You perhaps compiled the modules for the drivers yourself and did not use the debian packaged fglrx-driver? Thus, it must be an unneeded limitation on the debian packaged driver which limits its installation... Full listing at http://packages.debian.org/unstable/x11/fglrx-driver which lists as required packages:

xserver-xorg (<< 6.8.99)
 the X.Org X server 
xserver-xorg (>= 6.8.0) 

The first limitation (<<6.8.99) is what prevents installation. I'm sure I could force apt to install it, but I may go back to compiling the modules myself, as using fglrx 8.20.8 with kernel 2.6.15 needs a small patch to compile correctly anyway... --gsmenden

Spiney, where exactly do you have your package from? I re-build the 8.20.8-package from debian with the <<6.8.99 dependecy removed, but when I try to run X, I get

[R200Setup] X version mismatch - detected X.org 7.0.0.0, required X.org 6.8.0.0
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)

Any hints? --[User:nomeata|nomeata]

I used the ati-installer (the huge download), created a Debian sid package and installed it, but got the same error. The installer seems to fetch the wrong driver version from the archive, so I extracted it with

./ati-driver-installer-8.20.8-i386.run --extract <sometempdir>

and put the necessary files from the created <sometempdir>/x690 subdirectory into /usr by hand. All IIRC, it's been some time since. :)

--spiney 07:29, 11 Jan 2006 (CET)

Thanks for the pointer. This is how you get proper debian packages out of the ati-installer:

./ati-driver-installer-8.20.8-i386.run --extract fglrx-tmp
cd fglrx-tmp
$editor packages/Debian/ati-packager.sh #  in the line "sid|unstable) X_DIR=x680;;", put a x690 for the x680
./fglrx-tmp/packages/Debian/ati-packager.sh --buildpkg sid
cd ..
sudo dpkg -i fglrx-kernel-src_8.20.8-1_i386.deb fglrx-driver_8.20.8-1_i386.deb

--Nomeata 00:35, 13 Jan 2006 (CET)



Nice - confirmed works on my T43p running sid. From then on (or until 8.21.x comes out) you'll have to tell apt to hold back fglrx-driver package, or it will try to "update" fglrx-driver to 8.20.8-1.1 and therefore revert back to the problematic drivers. --gsmenden


Thanks for the info, Nomeata, that's a lot cleaner a solution than my manual way.

--spiney 08:32, 13 Jan 2006 (CET)


To get this working under 2.6.15 with x.org 6.9, you will also need to apply a small patch - there is a link on the main article page. After you install the fglrx-driver package with the 6.9 versioning hack above, go to /usr/src/modules and copy the patch here. Modify the first two lines of the patch file to take out the "build_mod" directory, e.g. first line should begin with

--- fglrx.orig/firegl_public.c 

and call it with the -p0 strip option. It should patch the firegl_public.c file cleanly. You can then install as usual for your kernel (2.6.14.x or 2.6.15) using module-assistant.

Update - although X will come up in kernel 2.6.15 with the fglrx drivers patched as above, there is some strange behavior exhibited in all of X apllications - frequent hanging of applications when closing windows. Reverting back to the radeon driver in 2.6.15 solves these - so it is likely the ATI proprietary driver causing some problems.

Yet another update - fglrx 8.21.7 is out as of 1/19/2006, now supporting OpenGL 2.0, so eventually we will have beautiful complex shading / fog effects on Linux, too. It works well with X.Org 6.9 out of the box.

Unfortunately, this version gives the same problems when used (unpatched) with kernel 2.6.15 with strange lockups occasionally requiring reset of X. I have not tried this with the ~10 line patch listed on the main site, but that patch not work for me with 8.20.6. Anybody else have experience with 2.6.15 and fglrx?

--gsmenden 12:39, 20 Jan 2006 (EST)

Disabling the external VGA port?

Does anyone know how disable the VGA port completely even when a cable is attached? Fiddling around with the DesktopSetup and ForceMonitor options didn't do the trick for me, and the MonitorLayout option found in some documentation is no longer valid in the current fglrx driver.

--spiney 19:42, 10 Jan 2006 (CET)


Debian-specific script to switch fglrx<->radeon

Don't know where to put it exactly, but if someone's interested (and using Debian), I've put up a script for easily switching graphics driver configurations. Feedback appreciated (altho I haven't got any to the xscreensaver patch ;)), especially if someone could do something similar for other distributions (Gentoo being half-way there it seems) and incorporate it into the script.

--spiney 15:25, 17 January 2006 (CET)