From ThinkWiki
Revision as of 01:00, 2 December 2006 by B.Steinbrink (Talk | contribs) (Added a question about "iwpriv set_power")
Jump to: navigation, search

The ipw2000 drivers loads clean on my t42 and the interface eth1 is accessible. However, the wireless-lan LED does not light and i cant connect. Havent figured out what this is.

Radio Switch utility needed

I have the same problem. WiFi adapter must be turned on before using. In Windows software utility is executed by Fn+F5 keys. This utility turns WiFi and/or Bluetooth adpters on/off. In Linux Fn+F5 controls only Bluetooth adapter. Unfortunately I can not find switch utility yet (10 Sep 2005).

Try using the usual hotkey hooks to activate the power management features described in the article. --Thinker 04:37, 18 Nov 2005 (CET)

Reliability problems

On a T43p ipw2200 v1.0.6 works well 95% of the time with WPA using wpa_supplicant. However it seemingly randomly causes trouble and refuses to connect (it is not the router, as non-linux devices work.) It always recovers with a killall wpa_supplicant, unloading the ipw2200 and ieee80211 modules, and reloading everything (you can even write a "netreset" script to do this for you automatically, as I have done.)

It's frustrating, because this is so un-"linux-like" to have intermittent unreliability. Usually things work 100% or 0% of the time on my linux system. Note, I have not used the 2.6.15-rc kernel version nor 1.0.8 with WPA yet, this problem might be fixed. Can anybody verify? --Gsmenden

Same problem here with a Linksys router and WPA, no problem with other routers ... I'll try the new kernel and ipw2200--Xoby 18:35, 15 January 2006 (CET)
I've tried and still had problems, I also edited my wpa_supplicant file to:
### Associate with any open access point
###  Scans/ESSID changes can be done with wpa_cli
       pairwise=TKIP CCMP

And successfully transfered more than 5 Gb without any problem--Xoby 11:16, 19 January 2006 (CET)

Sudden breakage...

Have any of you had recent problems while running debian sid with ipw2200-1.0.10 and ieee80211-1.1.9 on a t43p? All of a sudden since 2d ago my wireless initialization gives the following error report:

   Error for wireless request "Set Encode" (8B2A) :
       SET failed on device eth1 ; No such device.
   Error for wireless request "Set ESSID" (8B1A) :
       SET failed on device eth1 ; No such device.
   SIOCSIFADDR: No such device
   eth1: ERROR while getting interface flags: No such device
   SIOCSIFNETMASK: No such device
   eth1: ERROR while getting interface flags: No such device

I can load the modules without complaint, but can not use the device. I have tried everything obvious to fix it: reinstalling via module-assistant the ipw2200 and ieee80211 drivers, downgrading to old versions, manually installing from sources without module-assistant, disabling then re-enabling the adapter in the BIOS, etc. I have the 2.3 and 2.4 version firmware in the appropriate directory.

I was ready to dismiss this as a hardware problem, but when I boot up knoppix or suse-live-dvd, the wireless works consistently!  ??? Odd that this suddenly break - I can not think of anything that triggered this, but I do "apt-get upgrade" approximately daily.

I'm running, but my build also suddenly displays identical behavior... gsmenden 11:30, 30 January 2006 (EST)

Bizarre. Delving through the ipw2200-devel archives reveals several users having similar non-detection issues due to trouble loading the firmware. In the /etc/hotplug area one person solved a similar issue by removing firmware.agent file, which did not work for me.

I decided to completely remove the hotplug system

apt-get remove --purge hotplug

followed by re-apt-getting hotplug. Voila, everything works as before. Sometimes Debian sid is as flaky as a baklava - an ill-timed "apt-get upgrade" can effectively destroy your system when running unstable, yet "stable" is far, far too behind the times for me...  :(

gsmenden 13:55, 30 January 2006 (EST)

Enhanced power saving with set_power 5

Using "set_power 5" instead of "set_power 7" reduces power consumption in idle times (i.e. no network traffic) by about 1.5 watts on my T43, which is pretty good if you just want to keep your irc or im client running. Does anyone have a clue why that happens? Are there any drawbacks to this? (23:55, 1 December 2006 (CET))