Talk:How to make use of Graphics Chips Power Management features

Experimentally, it seems that rovclock determines the maximum frequency, and "DynamicClocks" tells the chip to a lower frequency when possible. They are thus complementary. --Thinker 18:59, 27 Oct 2005 (CEST)

show current power state with fglrx?

Switching power states using aticonfig seems to work fine. Seems, because I can't really see in which state the ATI chip is currently in. Or can I?

--spiney 14:40, 20 Nov 2005 (CET)

---

You can (destructively) check whether it's in a specific state by trying to switch to that state. If it's alredy there, it will give an error. If not, it will switch and (on my machine) cause a brief screen blink. Indeed, brilliant engineering.

--Thinker 15:32, 20 Nov 2005 (CET)

---

aticonfig and Xorg.0.log don't match

I was testing this PowerPlay business and I saw that aticonfig --lsp outputs:

  core/mem      [flags]
---------------
1: 105/122 MHz  [low voltage]
2: 209/182 MHz  [low voltage]
3: 297/230 MHz  [default state]

But Xorg.0.log reports that the states are:

(II) fglrx(0): POWERplay version 3.  4 power states available:
(II) fglrx(0):   1. 297/230MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 105/122MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0):   3. 250/230MHz @ 60Hz [thermal diode mode]
(II) fglrx(0):   4. 209/182MHz @ 60Hz [low voltage]

Am I the only one that think this is kind of odd? I'm using a R52 with a X300 card. Omarkj