Difference between revisions of "Sample Fn-F7 script"

From ThinkWiki
Jump to: navigation, search
(Debugging proposal to work with xrandr 1.2, with ATI card: only comment; needs comment out/ uncomment)
(Display switcher script)
Line 344: Line 344:
 
done
 
done
 
</bash>
 
</bash>
 +
 +
==Script to switch between Internal, VGA and S-video==
 +
This highly overdone script allows to switch between all combinations of Internal, VGA and S-video out. VGA and and S-video at the same time are not allowed on my hardware (I have a T41 with Radeon 7500), so I masked these combinations out. Instead of disabling the internal display with xrandr, I turn off the backlight. One of the allowed combinations is all displays off, and xorg crashes if turning off all displays with xrandr. The script depends on the debian package acpi-support, which is also found in ubuntu and crunchbang (which is what I am using). The dependency can easily be broken out though. Can easily be modified to fulfill other needs, i.e. if you turn off your backlight with something else than radeontool. There is also an OSD displayed in the upper left corner of all active displays.
 +
 +
<bash>
 +
#/bin/sh
 +
 +
. /usr/share/acpi-support/power-funcs        # for getXuser
 +
. /etc/default/acpi-support                  # for RADEON_LIGHT
 +
 +
# First prevent concurrent execution
 +
 +
LOCK_FILE=/tmp/swapscreenslock
 +
WAITING_TIME=1
 +
LOGGER="`which logger 2>/dev/null` -i"
 +
if (set -C; : > $LOCK_FILE) 2>/dev/null; then : ; else
 +
    # Lock file exists - wait as long as theoretically is needed for the other script to finish and retry
 +
    sleep $WAITING_TIME
 +
    if (set -C; : > $LOCK_FILE) 2>/dev/null; then : ; else
 +
        # Lock file still exists - we should never end up here! Consider removing the lock file.
 +
        $LOGGER "Lock file exists - earlier call to script stalled? Consider removing lock file \"$LOCK_FILE\". Exiting."
 +
        exit 1
 +
    fi
 +
fi
 +
trap 'rm $LOCK_FILE' EXIT
 +
 +
# External output may be "VGA-0" or "S-video"
 +
XRANDR=`which xrandr 2>/dev/null`
 +
OSD_CAT=`which osd_cat 2>/dev/null`
 +
LAPTOP="LVDS"
 +
VGA="VGA-0"
 +
SVIDEO="S-video"
 +
VGA_POSITION="--right-of $LAPTOP"
 +
#VGA_POSITION="--same-as $LAPTOP"    # Mirror
 +
SVIDEO_POSITION="--right-of $LAPTOP"
 +
 +
OSD_GENERICARGS="--delay=3 --age=0 --font=-adobe-helvetica-bold-r-normal-*-*-180-*-*-p-*-*-* --colour=green --shadow=1"
 +
OSD_HOFFSET=25
 +
OSD_VOFFSET=25
 +
 +
function screen_toggle {
 +
    # Figure out current state
 +
    XRANDR_STATUS=`su $user -c "$XRANDR -q"`
 +
 +
    # Laptop is of course always connected, however I'll leave the script this
 +
    # way for making it easier to make the script a little more generic.
 +
    LAPTOP_CONN=`echo "$XRANDR_STATUS" | grep ^$LAPTOP | grep " connected"`
 +
    VGA_CONN=`echo "$XRANDR_STATUS" | grep ^$VGA | grep " connected"`
 +
    SVIDEO_CONN=`echo "$XRANDR_STATUS" | grep ^$SVIDEO | grep " connected"`
 +
 +
    LAPTOP_STATE=`radeontool light | grep 'looks on'`
 +
    VGA_STATE=`echo $VGA_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
 +
    SVIDEO_STATE=`echo $SVIDEO_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
 +
 +
    CONNMASK=0
 +
    [ -n "$LAPTOP_CONN" ] && CONNMASK=$(( CONNMASK + 1 ))
 +
    if [ -n "$VGA_CONN" ]; then
 +
        CONNMASK=$(( CONNMASK + 2 ))
 +
        [ -n "$SVIDEO_CONN" ] && CONNMASK=$(( CONNMASK + 4 ))
 +
    else
 +
        # If VGA is not connected, TV will overtake its bit
 +
        [ -n "$SVIDEO_CONN" ] && CONNMASK=$(( CONNMASK + 2 ))
 +
    fi
 +
 +
    STATE=0
 +
    if [ -n "$LAPTOP_STATE" ]; then STATE=$(( STATE + 1 )); fi
 +
    if [ -n "$VGA_CONN" ]; then
 +
        [ -n "$VGA_STATE" ] && STATE=$(( STATE + 2 ))
 +
        [ -n "$SVIDEO_STATE" ] && STATE=$(( STATE + 4 ))
 +
    else
 +
        # If VGA is not connected, TV will overtake its bit
 +
        [ -n "$SVIDEO_STATE" ] && STATE=$(( STATE + 2 ))
 +
    fi
 +
 
 +
    # Go to next state
 +
    STATE=$(( (STATE+1) % (CONNMASK+1) ))
 +
 +
    # Forbidden states are TV and VGA at the same time, regardless of internal state
 +
    STATE=$(( STATE % 6 ))
 +
 +
    # If no screen is listed as connected, probably xrandr failed - do nothing.
 +
    if [ $CONNMASK -ne 0 ]; then
 +
        OSDTEXT=
 +
 +
        if [ -n "$VGA_CONN" ]; then
 +
            # Turn on or off external VGA
 +
            if [ $(( (STATE >> 1) % 2 )) -ne 0 ]; then
 +
                OSDTEXT="$OSDTEXT $VGA"
 +
                su $user -c "$XRANDR --output $VGA $VGA_POSITION --auto"
 +
            else
 +
                su $user -c "$XRANDR --output $VGA --off"
 +
            fi
 +
 +
            # Turn on or off S-Video output
 +
            if [ $(( (STATE >> 2) % 2 )) -ne 0 ]; then
 +
                OSDTEXT="$OSDTEXT $SVIDEO"
 +
                su $user -c "$XRANDR --output $SVIDEO $SVIDEO_POSITION --auto"
 +
            else
 +
                [ -n "$SVIDEO_CONN" ] && su $user -c "$XRANDR --output $SVIDEO --off"
 +
            fi
 +
        else
 +
            # If VGA is not connected, TV will overtake its bit
 +
 +
            # Turn on or off S-Video output
 +
            if [ $(( (STATE >> 1) % 2 )) -ne 0 ]; then
 +
                OSDTEXT="$OSDTEXT $SVIDEO"
 +
                su $user -c "$XRANDR --output $SVIDEO $SVIDEO_POSITION --auto"
 +
            else
 +
                [ -n "$SVIDEO_CONN" ] && su $user -c "$XRANDR --output $SVIDEO --off"
 +
            fi
 +
        fi
 +
 +
        # Never turn on or off internal screen - only turn on or off backlight.
 +
        # Do this after the xrandr calls above, during which the backlight
 +
        # might go on.
 +
        if [ $(( STATE % 2 )) -ne 0 ]; then
 +
            if pidof xscreensaver >/dev/null; then
 +
                su $user -c "xscreensaver-command -unthrottle"
 +
            fi 
 +
            if [ x$RADEON_LIGHT = xtrue ]; then
 +
                [ -x /usr/sbin/radeontool ] && radeontool light on
 +
            fi 
 +
            if pidof xscreensaver >/dev/null; then
 +
                su $user -c "xscreensaver-command -deactivate"
 +
            fi 
 +
            su $user -c "xset dpms force on"
 +
            OSDTEXT="$OSDTEXT $LAPTOP"
 +
        else
 +
            if [ `pidof xscreensaver` ]; then
 +
                su $user -c "(xscreensaver-command -throttle)"
 +
            fi
 +
            # Not calling xset to turn off dpms prohibits key presses from
 +
            # turning the backlight back on all the time. Do make sure to have
 +
            # RADEON_LIGHT enabled though. The rest of the script works even
 +
            # though RADEON_LIGHT left disabled, the only effect is that the
 +
            # laptop panel will always be considered "on".
 +
            #su $user -c "xset dpms force off"
 +
            if [ x$RADEON_LIGHT = xtrue ]; then
 +
                [ -x /usr/sbin/radeontool ] && radeontool light off
 +
            fi
 +
        fi
 +
 +
        $LOGGER Currently active GPU outputs: $OSDTEXT
 +
 +
        # Wait a little for the hardware to reach the new state
 +
        #sleep $WAITING_TIME
 +
 +
        # Figure out current state again, to put the OSD on the right places.
 +
        XRANDR_STATUS=`su $user -c "$XRANDR -q"`
 +
 +
        VGA_CONN=`echo "$XRANDR_STATUS" | grep ^$VGA | grep " connected"`
 +
        SVIDEO_CONN=`echo "$XRANDR_STATUS" | grep ^$SVIDEO | grep " connected"`
 +
 +
        VGA_STATE=`echo $VGA_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
 +
        SVIDEO_STATE=`echo $SVIDEO_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
 +
 +
        VGA_HOFFSET=$(( `echo $VGA_STATE | sed 's/[0-9x]*\([+-][0-9]*\).*/\1/'` + OSD_HOFFSET ))
 +
        VGA_VOFFSET=$(( `echo $VGA_STATE | sed 's/[0-9x]*[+-][0-9]*\([+-][0-9]*\)/\1/'` + OSD_VOFFSET ))
 +
        SVIDEO_HOFFSET=$(( `echo $SVIDEO_STATE | sed 's/[0-9x]*\([+-][0-9]*\).*/\1/'` + OSD_HOFFSET ))
 +
        SVIDEO_VOFFSET=$(( `echo $SVIDEO_STATE | sed 's/[0-9x]*[+-][0-9]*\([+-][0-9]*\)/\1/'` + OSD_VOFFSET ))
 +
 +
        # On screen display.
 +
        if [ -n "$OSD_CAT" ] ; then
 +
            su $user -c "echo $OSDTEXT | $OSD_CAT $OSD_GENERICARGS --offset=$OSD_HOFFSET --indent=$OSD_VOFFSET - &"
 +
            [ -n "$VGA_CONN" ] && su $user -c "echo $OSDTEXT | $OSD_CAT $OSD_GENERICARGS --offset=$VGA_VOFFSET --indent=$VGA_HOFFSET - &"
 +
            [ -n "$SVIDEO_CONN" ] && su $user -c "echo $OSDTEXT | $OSD_CAT $OSD_GENERICARGS --offset=$SVIDEO_HOFFSET --indent=$SVIDEO_VOFFSET - &"
 +
        fi
 +
    fi
 +
}
 +
 +
# Snippet borrowed from /etc/acpi/lid.sh
 +
for x in /tmp/.X11-unix/*; do
 +
  displaynum=`echo $x | sed s#/tmp/.X11-unix/X##`
 +
  getXuser;
 +
  if [ x"$XAUTHORITY" != x"" ]; then
 +
      export DISPLAY=":$displaynum"
 +
      screen_toggle
 +
  fi
 +
done
 +
</bash>
 +
 +
If neither VGA nor S-video are connected, the script will only flip on and off the backlight. If one output is connected, be it VGA or S-video, the sequence will be 1) Internal, 2) VGA/S-video (backlight off), 3) Internal+VGA/S-video, 0) all off. If both a monitor and a TV are connected, the sequence will be 1) Internal, 2) VGA (backlight off), 3) Internal+VGA, 4) S-video (backlight off), 5) Internal+S-video, 0) all off.
  
 
== A Python Toggle script ==
 
== A Python Toggle script ==

Revision as of 10:14, 19 February 2010

This guide will help you configure Fn-F7 key combination to toggle between internal, mirror, external, or both screens. This was tested on ThinkPad X60s running Fedora 8, please comment if it works or does not work for you.

Works like a charm on X61s with Xubuntu 7.10. Working with R60e with some modifications noted below.

The script does not work when using fglrx or a version of XRandR < 1.2, because there is no dynamic display switching support then. When fglrx is used, aticonfig can be used for the switching in this Script for Dynamic Display Management with fglrx.

configuring the virtual screen size

Add a "Virtual" statement to your /etc/X11/xorg.conf, the total resolution should be large enough to fit all your screens in the configuration you want, for example if you have 1600x1200 monitor to the left of your internal 1024x768 monitor, your total max resolution is 2624x1200 (See Xorg RandR 1.2 for more details):

Section "Screen"
       Identifier "Screen0"
       Device     "Videocard0"
       DefaultDepth     24
        SubSection "Display"
               Viewport   0 0
               Depth     24
               Virtual   2624 1200
       EndSubSection
EndSection

Restart X server at this point (i.e. logout and login).

configuring acpi

Create /etc/acpi/events/thinkpad.conf:

<bash> event=ibm/hotkey HKEY 00000080 00001007 action=/usr/local/sbin/thinkpad-fn-f7 </bash>

or you may (eg Ubuntu 7.10) already have /etc/acpi/events/ibm-videobtn <bash>

  1. /etc/acpi/events/ibm-videobtn
  2. This is called when the user presses the video button. It is currently
  3. a placeholder.

event=ibm/hotkey HKEY 00000080 00001007 action=/bin/true </bash> in which case modify the line 'action=/bin/true' to run the script as above.

It may also be necessary to enable acpi events as per How to get special keys to work with (in root terminal) # echo enable,0x084e > /proc/acpi/ibm/hotkey Note this command isn't persistent. so you will also need to add the line to /etc/rc.local to enable hotkeys at boot, and to re-enable the hotkeys after suspend to disk or RAM, create the file /etc/acpi/resume.d/91-ibm-hotkey-enable.sh consisting of

<bash>

  1. !/bin/bash
  2. enable ibm-hotkeys (specifically Fn2, Fn7)
  3. 12 bit mask, little end is F1 default 0x080c = F12+F4+F3

echo enable,0x084e > /proc/acpi/ibm/hotkey </bash>

ref: [frosch.org.uk] and [ibm-acpi.sourceforge]

identify output devices

Note the names of your output devices as you will have to change EXTERNAL_OUTPUT and INTERNAL_OUTPUT to what xrandr shows, for example VGA and LVDS in this case:

$ xrandr -q
VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis) 432mm x 324mm
...
LVDS connected (normal left inverted right x axis y axis)

The bash script

Create /usr/local/sbin/thinkpad-fn-f7, you can set EXTERNAL_LOCATION to one of: left, right, above, or below. <bash>

  1. !/bin/bash
  1. External output may be "VGA" or "VGA-0" or "DVI-0" or "TMDS-1"

EXTERNAL_OUTPUT="VGA" INTERNAL_OUTPUT="LVDS" EXTERNAL_LOCATION="left"

  1. Figure out which user and X11 display to work on
  2. TODO there has to be a better way to do this?

X_USER=$(w -h -s | grep ":[0-9]\W" | head -1 | awk '{print $1}') export DISPLAY=$(w -h -s | grep ":[0-9]\W" | head -1 | awk '{print $3}')

  1. Switch to X user if necessary

if [ "$X_USER" != "$USER" ]; then

      SU="su $X_USER -c"

else

      SU="sh -c"

fi

case "$EXTERNAL_LOCATION" in

      left|LEFT)
              EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
              ;;
      right|RIGHT)
              EXTERNAL_LOCATION="--right-of $INTERNAL_OUTPUT"
              ;;
      top|TOP|above|ABOVE)
              EXTERNAL_LOCATION="--above $INTERNAL_OUTPUT"
              ;;
      bottom|BOTTOM|below|BELOW)
              EXTERNAL_LOCATION="--below $INTERNAL_OUTPUT"
              ;;
      *)
              EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
              ;;

esac

  1. Figure out current state

INTERNAL_STATE=$($SU xrandr | grep ^$INTERNAL_OUTPUT | grep " con" | sed "s/.*connected//" | sed "s/ //" | sed "s/ .*//g") EXTERNAL_STATE=$($SU xrandr | grep ^$EXTERNAL_OUTPUT | grep " con" | sed "s/.*connected//" | sed "s/ //" | sed "s/ .*//g")

  1. I recommend to replace these prior two statements, since otherwise with xrandr 1.2 it produces wrong results:
  2. a textportion "(normal" otherwise still remains when a screen is connected, but switched off (by e.g. toggling!)
  3. (comment out the prior two lines, and uncomment the following two lines:)
  4. INTERNAL_STATE=$($SU xrandr | grep ^$INTERNAL_OUTPUT | grep " con" | sed "s/.*connected//" | sed "s/ //" | sed "s/ .*//g"| sed "s/(normal//g" )
  5. EXTERNAL_STATE=$($SU xrandr | grep ^$EXTERNAL_OUTPUT | grep " con" | sed "s/.*connected//" | sed "s/ //" | sed "s/ .*//g"| sed "s/(normal//g" )


if [ -z "$INTERNAL_STATE" ]; then

      STATE="external"

elif [ -z "$EXTERNAL_STATE" ]; then

      STATE="internal"

else

      INTERNAL_STATE=$(echo $INTERNAL_STATE | sed "s/[0-9]*x[0-9]*//")
      EXTERNAL_STATE=$(echo $EXTERNAL_STATE | sed "s/[0-9]*x[0-9]*//")
      if [ "$INTERNAL_STATE" = "$EXTERNAL_STATE" ]; then
              STATE="mirror"
      else
              STATE="both"
      fi

fi

function screen_external(){

  1. recommend exchange the order, since otherwise doesn't work
  2. with my ati adapter (please uncomment if needed, and
  3. comment out the other two):
  4. $SU "xrandr --output $EXTERNAL_OUTPUT --auto"
  5. $SU "xrandr --output $INTERNAL_OUTPUT --off"
      $SU "xrandr --output $INTERNAL_OUTPUT --off"
      $SU "xrandr --output $EXTERNAL_OUTPUT --auto"

}

function screen_internal(){

      $SU "xrandr --output $EXTERNAL_OUTPUT --off"
      $SU "xrandr --output $INTERNAL_OUTPUT --auto"

}

function screen_mirror(){

      $SU "xrandr --output $INTERNAL_OUTPUT --auto"
      $SU "xrandr --output $EXTERNAL_OUTPUT --auto --same-as $INTERNAL_OUTPUT"

}

function screen_both(){

      $SU "xrandr --output $INTERNAL_OUTPUT --auto"
      $SU "xrandr --output $EXTERNAL_OUTPUT --auto $EXTERNAL_LOCATION"

}

function screen_toggle(){

      case "$STATE" in
              internal)
                      screen_mirror
                      ;;
              mirror)
                      screen_external
                      ;;
              external)
                      screen_both
                      ;;
              both)
                      screen_internal
                      ;;
              *)
                      screen_internal
                      ;;
      esac

}

  1. What should we do?

DO="$1" if [ -z "$DO" ]; then

      if [ $(basename $0) = "thinkpad-fn-f7" ]; then
              DO="toggle"
      fi

fi

case "$DO" in

      toggle)
              screen_toggle
              ;;
      internal)
              screen_internal
              ;;
      external)
              screen_external
              ;;
      mirror)
              screen_mirror
              ;;
      both)
              screen_both
              ;;
      status)
              echo "Current Fn-F7 state is: $STATE"
              echo
              echo "Attached monitors:"
              $SU xrandr | grep "\Wconnected" | sed "s/^/ /"
              ;;
      *)
              echo "usage: $0 <command>" >&2
              echo >&2
              echo "  commands:" >&2
              echo "          status" >&2
              echo "          internal" >&2
              echo "          external" >&2
              echo "          mirror" >&2
              echo "          both" >&2
              echo "          toggle" >&2
              echo >&2
              ;;

esac </bash>

set permissions and restart acpi

As root, or using sudo run the following commands,

$ sudo chmod 755 /usr/local/sbin/thinkpad-fn-f7
$ sudo service acpid restart
OR
$ sudo /etc/init.d/acpid restart

You should be ready to go, just press Fn-F7 to try.

Alternative script using .Xauthority rather than su

On systems where the previous script has trouble with the "su" command (I was getting "Can't open display -" errors in /var/log/acpid on Ubuntu 8.04), you can try getting the magic cookie out of the .Xauthority file.

Each user has an ~/.Xauthority file with one line for each X display containing a 'magic cookie' (Run $ xauth list to see the contents). The Xserver reads the record in ~/.Xauthority matching its display. When an X client application starts it also looks for that record and passes the magic cookie to the server. If it matches, the connection to the Xserver is allowed. Use the following script as an alternative

action=/usr/local/sbin/toggle-display.sh

for /etc/acpi/events/ibm-videobtn

<bash>

  1. !/bin/bash
  2. From: http://www.thinkwiki.org/wiki/Sample_Fn-F7_script
  3. External output may be "VGA" or "VGA-0" or "DVI-0" or "TMDS-1"

EXTERNAL_OUTPUT="VGA" INTERNAL_OUTPUT="LVDS"

  1. EXTERNAL_LOCATION may be one of: left, right, above, or below

EXTERNAL_LOCATION="right"

case "$EXTERNAL_LOCATION" in

      left|LEFT)
              EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
              ;;
      right|RIGHT)
              EXTERNAL_LOCATION="--right-of $INTERNAL_OUTPUT"
              ;;
      top|TOP|above|ABOVE)
              EXTERNAL_LOCATION="--above $INTERNAL_OUTPUT"
              ;;
      bottom|BOTTOM|below|BELOW)
              EXTERNAL_LOCATION="--below $INTERNAL_OUTPUT"
              ;;
      *)
              EXTERNAL_LOCATION="--left-of $INTERNAL_OUTPUT"
              ;;

esac

function screen_external(){

      xrandr --output $INTERNAL_OUTPUT --off
      xrandr --output $EXTERNAL_OUTPUT --auto

}

function screen_internal(){

      xrandr --output $EXTERNAL_OUTPUT --off
      xrandr --output $INTERNAL_OUTPUT --auto

}

function screen_mirror(){

      xrandr --output $INTERNAL_OUTPUT --auto
      xrandr --output $EXTERNAL_OUTPUT --auto --same-as $INTERNAL_OUTPUT

}

function screen_both(){

      xrandr --output $INTERNAL_OUTPUT --auto
      xrandr --output $EXTERNAL_OUTPUT --auto $EXTERNAL_LOCATION

}

function screen_toggle(){

      # Figure out current state
      INTERNAL_STATE=$(xrandr | grep ^$INTERNAL_OUTPUT | grep con | sed "s/.*connected //" | sed "s/(.*//")
      EXTERNAL_STATE=$(xrandr | grep ^$EXTERNAL_OUTPUT | grep con | sed "s/.*connected //" | sed "s/(.*//")
      if [ -z "$INTERNAL_STATE" ]; then
        STATE="external"
      elif [ -z "$EXTERNAL_STATE" ]; then
        STATE="internal"
      else
        INTERNAL_STATE=$(echo $INTERNAL_STATE | sed "s/[0-9]*x[0-9]*//")
        EXTERNAL_STATE=$(echo $EXTERNAL_STATE | sed "s/[0-9]*x[0-9]*//")
        if [ "$INTERNAL_STATE" = "$EXTERNAL_STATE" ]; then
          STATE="mirror"
        else
          STATE="both"
        fi
      fi
      case "$STATE" in
              internal)
                      screen_mirror
                      ;;
              mirror)
                      screen_external
                      ;;
              external)
                      screen_both
                      ;;
              both)
                      screen_internal
                      ;;
              *)
                      screen_internal
                      ;;
      esac

}

  1. based on /etc/acpi/screenblank.sh (Ubuntu 7.10)
  2. . /usr/share/acpi-support/power-funcs # for getXuser

getXuser() {

      user=`finger| grep -m1 ":$displaynum " | awk '{print $1}'`
      if [ x"$user" = x"" ]; then
              user=`finger| grep -m1 ":$displaynum" | awk '{print $1}'`
      fi
      if [ x"$user" != x"" ]; then
              userhome=`getent passwd $user | cut -d: -f6`
              export XAUTHORITY=$userhome/.Xauthority
      else
              export XAUTHORITY=""
      fi

}

  1. end of getXuser from /usr/share/acpi-support/power-funcs

for x in /tmp/.X11-unix/*; do

  displaynum=`echo $x | sed s#/tmp/.X11-unix/X##`
  getXuser;
  if [ x"$XAUTHORITY" != x"" ]; then
      export DISPLAY=":$displaynum"
     screen_toggle
  fi

done </bash>

Script to switch between Internal, VGA and S-video

This highly overdone script allows to switch between all combinations of Internal, VGA and S-video out. VGA and and S-video at the same time are not allowed on my hardware (I have a T41 with Radeon 7500), so I masked these combinations out. Instead of disabling the internal display with xrandr, I turn off the backlight. One of the allowed combinations is all displays off, and xorg crashes if turning off all displays with xrandr. The script depends on the debian package acpi-support, which is also found in ubuntu and crunchbang (which is what I am using). The dependency can easily be broken out though. Can easily be modified to fulfill other needs, i.e. if you turn off your backlight with something else than radeontool. There is also an OSD displayed in the upper left corner of all active displays.

<bash>

  1. /bin/sh

. /usr/share/acpi-support/power-funcs # for getXuser . /etc/default/acpi-support # for RADEON_LIGHT

  1. First prevent concurrent execution

LOCK_FILE=/tmp/swapscreenslock WAITING_TIME=1 LOGGER="`which logger 2>/dev/null` -i" if (set -C; : > $LOCK_FILE) 2>/dev/null; then : ; else

   # Lock file exists - wait as long as theoretically is needed for the other script to finish and retry
   sleep $WAITING_TIME
   if (set -C; : > $LOCK_FILE) 2>/dev/null; then : ; else
       # Lock file still exists - we should never end up here! Consider removing the lock file.
       $LOGGER "Lock file exists - earlier call to script stalled? Consider removing lock file \"$LOCK_FILE\". Exiting."
       exit 1
   fi

fi trap 'rm $LOCK_FILE' EXIT

  1. External output may be "VGA-0" or "S-video"

XRANDR=`which xrandr 2>/dev/null` OSD_CAT=`which osd_cat 2>/dev/null` LAPTOP="LVDS" VGA="VGA-0" SVIDEO="S-video" VGA_POSITION="--right-of $LAPTOP"

  1. VGA_POSITION="--same-as $LAPTOP" # Mirror

SVIDEO_POSITION="--right-of $LAPTOP"

OSD_GENERICARGS="--delay=3 --age=0 --font=-adobe-helvetica-bold-r-normal-*-*-180-*-*-p-*-*-* --colour=green --shadow=1" OSD_HOFFSET=25 OSD_VOFFSET=25

function screen_toggle {

   # Figure out current state
   XRANDR_STATUS=`su $user -c "$XRANDR -q"`
   # Laptop is of course always connected, however I'll leave the script this
   # way for making it easier to make the script a little more generic.
   LAPTOP_CONN=`echo "$XRANDR_STATUS" | grep ^$LAPTOP | grep " connected"`
   VGA_CONN=`echo "$XRANDR_STATUS" | grep ^$VGA | grep " connected"`
   SVIDEO_CONN=`echo "$XRANDR_STATUS" | grep ^$SVIDEO | grep " connected"`
   LAPTOP_STATE=`radeontool light | grep 'looks on'`
   VGA_STATE=`echo $VGA_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
   SVIDEO_STATE=`echo $SVIDEO_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
   CONNMASK=0
   [ -n "$LAPTOP_CONN" ] && CONNMASK=$(( CONNMASK + 1 ))
   if [ -n "$VGA_CONN" ]; then 
       CONNMASK=$(( CONNMASK + 2 ))
       [ -n "$SVIDEO_CONN" ] && CONNMASK=$(( CONNMASK + 4 ))
   else
       # If VGA is not connected, TV will overtake its bit
       [ -n "$SVIDEO_CONN" ] && CONNMASK=$(( CONNMASK + 2 ))
   fi
   STATE=0
   if [ -n "$LAPTOP_STATE" ]; then STATE=$(( STATE + 1 )); fi
   if [ -n "$VGA_CONN" ]; then 
       [ -n "$VGA_STATE" ] && STATE=$(( STATE + 2 ))
       [ -n "$SVIDEO_STATE" ] && STATE=$(( STATE + 4 ))
   else
       # If VGA is not connected, TV will overtake its bit
       [ -n "$SVIDEO_STATE" ] && STATE=$(( STATE + 2 ))
   fi
 
   # Go to next state
   STATE=$(( (STATE+1) % (CONNMASK+1) ))
   # Forbidden states are TV and VGA at the same time, regardless of internal state
   STATE=$(( STATE % 6 ))
   # If no screen is listed as connected, probably xrandr failed - do nothing.
   if [ $CONNMASK -ne 0 ]; then
       OSDTEXT=
       if [ -n "$VGA_CONN" ]; then 
           # Turn on or off external VGA
           if [ $(( (STATE >> 1) % 2 )) -ne 0 ]; then 
               OSDTEXT="$OSDTEXT $VGA"
               su $user -c "$XRANDR --output $VGA $VGA_POSITION --auto"
           else
               su $user -c "$XRANDR --output $VGA --off"
           fi
           # Turn on or off S-Video output
           if [ $(( (STATE >> 2) % 2 )) -ne 0 ]; then 
               OSDTEXT="$OSDTEXT $SVIDEO"
               su $user -c "$XRANDR --output $SVIDEO $SVIDEO_POSITION --auto"
           else
               [ -n "$SVIDEO_CONN" ] && su $user -c "$XRANDR --output $SVIDEO --off"
           fi
       else
           # If VGA is not connected, TV will overtake its bit
           # Turn on or off S-Video output
           if [ $(( (STATE >> 1) % 2 )) -ne 0 ]; then 
               OSDTEXT="$OSDTEXT $SVIDEO"
               su $user -c "$XRANDR --output $SVIDEO $SVIDEO_POSITION --auto"
           else
               [ -n "$SVIDEO_CONN" ] && su $user -c "$XRANDR --output $SVIDEO --off"
           fi
       fi
       # Never turn on or off internal screen - only turn on or off backlight.
       # Do this after the xrandr calls above, during which the backlight
       # might go on.
       if [ $(( STATE % 2 )) -ne 0 ]; then
           if pidof xscreensaver >/dev/null; then 
               su $user -c "xscreensaver-command -unthrottle"
           fi  
           if [ x$RADEON_LIGHT = xtrue ]; then
               [ -x /usr/sbin/radeontool ] && radeontool light on
           fi  
           if pidof xscreensaver >/dev/null; then
               su $user -c "xscreensaver-command -deactivate"
           fi  
           su $user -c "xset dpms force on"
           OSDTEXT="$OSDTEXT $LAPTOP"
       else
           if [ `pidof xscreensaver` ]; then
               su $user -c "(xscreensaver-command -throttle)"
           fi
           # Not calling xset to turn off dpms prohibits key presses from
           # turning the backlight back on all the time. Do make sure to have
           # RADEON_LIGHT enabled though. The rest of the script works even
           # though RADEON_LIGHT left disabled, the only effect is that the
           # laptop panel will always be considered "on".
           #su $user -c "xset dpms force off"
           if [ x$RADEON_LIGHT = xtrue ]; then
               [ -x /usr/sbin/radeontool ] && radeontool light off
           fi
       fi
       $LOGGER Currently active GPU outputs: $OSDTEXT
       # Wait a little for the hardware to reach the new state
       #sleep $WAITING_TIME
       # Figure out current state again, to put the OSD on the right places.
       XRANDR_STATUS=`su $user -c "$XRANDR -q"`
       VGA_CONN=`echo "$XRANDR_STATUS" | grep ^$VGA | grep " connected"`
       SVIDEO_CONN=`echo "$XRANDR_STATUS" | grep ^$SVIDEO | grep " connected"`
       VGA_STATE=`echo $VGA_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
       SVIDEO_STATE=`echo $SVIDEO_CONN | sed 's/.*connected\s\([0-9x+-]*\).*/\1/'`
       VGA_HOFFSET=$(( `echo $VGA_STATE | sed 's/[0-9x]*\([+-][0-9]*\).*/\1/'` + OSD_HOFFSET ))
       VGA_VOFFSET=$(( `echo $VGA_STATE | sed 's/[0-9x]*[+-][0-9]*\([+-][0-9]*\)/\1/'` + OSD_VOFFSET ))
       SVIDEO_HOFFSET=$(( `echo $SVIDEO_STATE | sed 's/[0-9x]*\([+-][0-9]*\).*/\1/'` + OSD_HOFFSET ))
       SVIDEO_VOFFSET=$(( `echo $SVIDEO_STATE | sed 's/[0-9x]*[+-][0-9]*\([+-][0-9]*\)/\1/'` + OSD_VOFFSET ))
       # On screen display. 
       if [ -n "$OSD_CAT" ] ; then 
           su $user -c "echo $OSDTEXT | $OSD_CAT $OSD_GENERICARGS --offset=$OSD_HOFFSET --indent=$OSD_VOFFSET - &"
           [ -n "$VGA_CONN" ] && su $user -c "echo $OSDTEXT | $OSD_CAT $OSD_GENERICARGS --offset=$VGA_VOFFSET --indent=$VGA_HOFFSET - &"
           [ -n "$SVIDEO_CONN" ] && su $user -c "echo $OSDTEXT | $OSD_CAT $OSD_GENERICARGS --offset=$SVIDEO_HOFFSET --indent=$SVIDEO_VOFFSET - &"
       fi
   fi

}

  1. Snippet borrowed from /etc/acpi/lid.sh

for x in /tmp/.X11-unix/*; do

  displaynum=`echo $x | sed s#/tmp/.X11-unix/X##`
  getXuser;
  if [ x"$XAUTHORITY" != x"" ]; then
      export DISPLAY=":$displaynum"
     screen_toggle
  fi

done </bash>

If neither VGA nor S-video are connected, the script will only flip on and off the backlight. If one output is connected, be it VGA or S-video, the sequence will be 1) Internal, 2) VGA/S-video (backlight off), 3) Internal+VGA/S-video, 0) all off. If both a monitor and a TV are connected, the sequence will be 1) Internal, 2) VGA (backlight off), 3) Internal+VGA, 4) S-video (backlight off), 5) Internal+S-video, 0) all off.

A Python Toggle script

This is a somewhat over-elaborate script which could be cut down when run by the /usr/local/sbin/toggle-display.sh script above. It was written to explore all the possibilities rather than economy of execution. The functions 'toggle_full', 'position', 'toggle_limited' and the OptionParser in 'main' may be omitted with suitable changes to function7. The appropriate outputs can be specified on the command line and it is not necessary to call it via acpi. eg you can run it as $ /usr/local/bin/toggle.py --help

<python>

#! /usr/bin/python
# -*- coding: utf-8 -*-
#
# stinkpad(a)blueyonder.co.uk	2007-11-26
"""Toggle internal and external displays (equivalent to ThinkPad Fn7)
Simple; cloned: on+off, on+on, off+on. 
Full; as simple plus xinerama: right, below,  left, above. 
Limited; as full but display will overlap if virtual screen is too small. 
Use 'xrandr -q' to determine output names. 
Further information: http://www.thinkwiki.org/wiki/Xorg_RandR_1.2 
"""
__usage__ = "usage: %prog [--help]|[[-i internal][-e external][-d displays]]"
__version__ = "toggle [djclark.eu 2007-11-26]"
#
# Output names; Intel: LVDS VGA TV TMDS-1 TMDS-2
#               ATI:   LVDS VGA-0 S-video DVI-0
LAPTOP = 'LVDS' 
MONITOR = 'VGA'
SEQUENCE = 'simple'
#
import sys
import os
import re
# "LVDS connected 1024x768+0+0 (normal left inverted right) 304mm x 228mm"
REGEX_OUTPUT = re.compile(r"""
	(?x)					# ignore whitespace
	^					# start of string
	(?P<output>[A-Za-z0-9\-]*)[ ] 		# LVDS VGA etc
	(?P<connect>(dis)?connected)[ ]		# dis/connected
	((					# a group
 	(?P<width>\d+)x 			# either 1024x768+0+0
	(?P<height>\d+)[+]  
 	(?P<horizontal>\d+)[+]
	(?P<vertical>\d+)
	)|[\D])					# or not a digit
	.*					# ignore rest of line
	""")

# "Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2624 x 1968"
REGEX_SCREEN = re.compile(r"""
	(?x) 				# ignore whitespace
	^				# start of string
	Screen[ ]			
	(?P<screen>\d)[: ]+
	minimum[ ]
	(?P<minWidth>\d+)[ x]+
	(?P<minHeight>\d+)[, ]+
	current[ ]+
	(?P<curWidth>\d+)[ x]+
	(?P<curHeight>\d+)[, ]+
	maximum[ ]+
	(?P<maxWidth>\d+)[ x]+
	(?P<maxHeight>\d+)
	""")	
def toggle_simple(d0, d1):
   """Toggle display states: on+off, on+on, off+on"""
   if d1['connect'] == 'disconnected': 	# external unplugged
       return ('auto','off',"") 		#     switch off external
   if d1['width'] is 0: 			# external off
       return ('auto','auto',"") 		#     both on
   if d0['width'] is 0: 			# laptop off
       return ('auto','off',"") 		#    laptop on
   return ('off','auto',"") 			# both on, laptop off
def toggle_full(d0, d1):
   """Toggle display states: 1+0, 1+1, 0+1, 1+E, 1+S, 1+W, 1+N""" 
   if d1['connect'] == 'disconnected': 	# external unplugged
       return ('auto','off',"") 		#     switch off external
   place = '--%s ' + d0['output']
   if d1['width'] == 0: 			# external off
       return ('auto','auto',place%'same-as') 	#     external on
   if d0['width'] == 0: 			# laptop off
       return ('auto','off',"") 		#    laptop on
   if d1['horizontal'] > 0: 			# external to right
       return ('auto','auto',place%'below') 	#     make below
   if d1['vertical'] > 0: 			# external below
       return ('auto','auto',place%'left-of') 	#     make left
   if d0['horizontal'] > 0: 			# external left
       return ('auto','auto',place%'above') 	#     make above
   if d0['vertical'] > 0: 			# external above
       return ('off','auto',"")  		#     laptop off
   return ('auto','auto',place%'right-of') 	# is same, make right
def position(orientation, da, db, screen):
   """Calculate offset position of second display"""
   p = 'auto --pos %sx%s'
   if orientation == 'V':
       if (da['height'] + db['height']) <= screen['maxHeight']:
           return p%(0, da['height'])
       return p%(0, screen['maxHeight'] - db['height'])
   else:
       if (da['width'] + db['width']) <= screen['maxWidth']:
           return p%(da['width'],0)
       return p%(screen['maxWidth'] - db['width'],0)
def toggle_limited(d0, d1, sz):
   """Toggle display states (overlapped): 1+0,1+1,0+1,1+E,1+S,1+W,1+N"""
   if d1['connect'] == 'disconnected': 	# external unplugged
       return ('auto','off') 			#     switch off external
   if d1['width'] == 0: 				# external off
       return ('auto --pos 0x0','auto --pos 0x0') 	#     both on
   if d0['width'] == 0: 				# laptop off
       return ('auto --pos 0x0','off') 		#     laptop on
   if d1['horizontal'] > 0: 				# external to right
       return ('auto --pos 0x0',position('V',d0,d1,sz)) #     put *below
   if d1['vertical'] > 0: 				# external below
       return (position('H',d1,d0,sz),'auto --pos 0x0') #     put *left
   if d0['horizontal'] > 0: 				# external left
       return (position('V',d1,d0,sz),'auto --pos 0x0') #     put *above
   if d0['vertical'] > 0: 				# external above
       return ('off','auto --pos 0x0')  		#     laptop off
   return ('auto --pos 0x0',position('H',d0,d1,sz)) 	# both, put*right
class DisplayNameError(UnboundLocalError):
   """Internal or External Display Name not found by xrandr -q """
def function7(disp0=LAPTOP, disp1=MONITOR, seq=SEQUENCE):
   """Use xrandr to read current display state and change state"""
   for line in os.popen('xrandr -q').read().splitlines():
       if line.startswith(disp0,0) :
           d0_state = REGEX_OUTPUT.match(line).groupdict()
       elif line.startswith(disp1,0):
           d1_state = REGEX_OUTPUT.match(line).groupdict()
       elif line.startswith('Screen',0):
           screen_size = REGEX_SCREEN.match(line).groupdict()
       else:
           pass
   for i in ('width','height','horizontal','vertical'):
       try:
           d0_state[i] = int(d0_state[i])
       except TypeError:
           d0_state[i] = 0
       except UnboundLocalError:
           raise DisplayNameError, 'Internal Display: %s not found'% disp0
       try:
           d1_state[i] = int(d1_state[i])
       except TypeError:
           d1_state[i] = 0
       except UnboundLocalError:
           raise DisplayNameError, 'External Display: %s not found'% disp1
   for i in screen_size.keys():
       try:
           screen_size[i] = int(screen_size[i])
       except TypeError:
           screen_size[i] = 0
   #
   toggle = toggle_simple
   xrandr ='xrandr --output '+disp0+' --%s --output '+disp1+' --%s %s'
   if seq == 'full':
       toggle = toggle_full
   if seq == 'limited':
       toggle = toggle_limited
       xrandr ='xrandr --output '+disp0+' --%s --output '+disp1+' --%s'
       os.popen(xrandr % toggle(d0_state, d1_state, screen_size))
   else:
       os.popen(xrandr % toggle(d0_state, d1_state))
def main():
   """ Command line options """
   global LAPTOP,MONITOR,SEQUENCE
   from optparse import OptionParser
   p = OptionParser(usage=__usage__, version=__version__, description=__doc__)  
   p.set_defaults(internal=LAPTOP, external=MONITOR, displays=SEQUENCE)
   p.add_option('-i','--internal', dest="internal", metavar=LAPTOP,
	help="internal display")
   p.add_option('-e','--external', dest="external", metavar=MONITOR,
 	help="external display")
   p.add_option('-d','--displays', dest="displays", action="store",
	choices=('simple', 'limited', 'full'), metavar=SEQUENCE,
	help='simple/limited/full')
   (opt, args) = p.parse_args()
   try:
       function7(opt.internal, opt.external, opt.displays)
   except DisplayNameError, err:
       print '\n'+str(err)+'\n'
       print os.popen('xrandr -q').read()
#
if __name__ == '__main__': 	#only when run from cmd line
   main()

</python>

This modified thinkpad-fn-f7 calls the toggle python script:

<bash>

#!/bin/bash
# usr/local/sbin/toggle-display.sh 
# based on /etc/acpi/screenblank.sh (Ubuntu 7.10)
#
# . /usr/share/acpi-support/power-funcs         # for getXuser
umask 022;
PATH="$PATH:/usr/bin/X11"
getXuser() {
       user=`finger| grep -m1 ":$displaynum " | awk '{print $1}'`
       if [ x"$user" = x"" ]; then
               user=`finger| grep -m1 ":$displaynum" | awk '{print $1}'`
       fi
       if [ x"$user" != x"" ]; then
               userhome=`getent passwd $user | cut -d: -f6`
               export XAUTHORITY=$userhome/.Xauthority
       else
               export XAUTHORITY=""
       fi
}
# end of getXuser from /usr/share/acpi-support/power-funcs
#
for x in /tmp/.X11-unix/*; do
   displaynum=`echo $x | sed s#/tmp/.X11-unix/X##`
   getXuser;
   if [ x"$XAUTHORITY" != x"" ]; then
       export DISPLAY=":$displaynum"
##     . /usr/share/acpi-support/screenblank.sh
       /usr/local/bin/toggle.py
   fi
done

</bash>

Python XRandR

[Python XRandR] is a set of python bindings to xrandr. The code is currently in development and the following code though much simpler than the python code above may not work reliably.

 from xrandr import xrandr
 def toggle_simple():
   """Toggle display states: on+off, off+on, on+on off+off"""
   screen = xrandr.get_current_screen()
   outputs = screen.get_outputs()
   for o in outputs:
       if o.is_connected():
           if o.is_active():
               o.disable()
               print 'disable %s'% o.name
           else:
               o.set_to_preferred_mode()
               print 'set to preferred mode %s'% o.name
               break
   screen.apply_output_config()

Having Fn-F7 run a RandR GUI

Instead of using it to toggle various screen(s) configurations, one may want to have it run a RandR GUI, such as grandr.

The following Debian wishlist bugs against the acpi-support package have patches attached that implement this behaviour using acpid; these patches are not Debian-specific, and actually provide example configuration for anyone interested into this:

References

[grandr] graphical interface to xrandr using GTK+ libraries.

[python-xrandr] Python bindings to xrandr which should enable a less clunky version of the python script above. Under development.