Problem with 3Com 10/100 Ethernet card not being recognized

From ThinkWiki
Revision as of 09:23, 4 May 2005 by Wyrfel (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Information about the problem of non-recognized 3Com Ethernet card when using ACPI.

Problem description

The card is not recognized properly. In fact the kernel finds the card and tries to enable it but gives an error message in dmesg output. The problem only occurs when ACPI is used instead of APM.

Affected Models

Affected Operating Systems

  • all Linux flavours

Status

This is a problem of the ACPI subsystem interfering with the PCI resource management.

Solutions

Try one of the following kernel parameters (in that order):

  • nolapic (disables support for local apic)
  • acpi=nopci (disables PCI resource control of the ACPI subsystem)
  • acpi=off (completely disables ACPI, should always work)