Difference between revisions of "Installing SuSE 10.1 on a ThinkPad T60"
| Line 1: | Line 1: | ||
Installation of Suse 10.1 on a T60. | Installation of Suse 10.1 on a T60. | ||
| + | == System == | ||
| + | ''T60 (2007-49G)'' | ||
| + | * Processor: Intel Core Duo Prozessor T2400 mit 1,83 GHz, 2 MB L2 Cache | ||
| + | * Ram: 512 MB 667 MHz DDR2 | ||
| + | * HD: 60 GB SATA w Active Protection System; 5400 U/min | ||
| + | * CD/DVD: DVD/CD-RW Combodrive V | ||
| + | * Display: 14,1' (35,8 cm); TFT Display; 1400x1050 (SXGA+) | ||
| + | * Graphics: ATI Mobility RADEON X1300; 64 MB DDR2 SDRAM | ||
| + | * Communication: 10/100/1000 LAN, Intel Mini PCI PRO/Wireless 3945ABG Lan, Infrarot, 56K Int. Modem | ||
== Summary == | == Summary == | ||
| + | Most of the installation went very smoothly. Many components were recognized and configured correctly. | ||
| + | {{NOTE|To keep the "ThinkVantage" Button functionality, create a primary boot partition and let grup be installed there | ||
| + | LEAVE THE MBR ALONE}} | ||
| + | |||
| + | |||
=== What works out of the box === | === What works out of the box === | ||
| Line 10: | Line 24: | ||
* Volume control keys and the function key for the locked screensaver. | * Volume control keys and the function key for the locked screensaver. | ||
* Always working without any OS support: keyboard light and screen brightness control | * Always working without any OS support: keyboard light and screen brightness control | ||
| + | * Wireless (actually worked even though it looked different at first, but then worked flawless after reboot) | ||
| + | * Suspend to disc and suspend to RAM (wow!) | ||
=== What needs to be fixed post-install === | === What needs to be fixed post-install === | ||
| − | * Graphics card (ati drivers available via ati homepage) | + | * Graphics card (ati drivers available via [http://www.ati.com ati] homepage) |
| + | |||
| + | To enable 3D acceleration, generate own rpm's from the ati package which can then be installed | ||
| + | either via yast or simply with rpm. | ||
| + | You should include the kernel sources in your installation since the ati script needs it to | ||
| + | generate the Suse specific package which in terms is needed to properly enable 3D acceleration | ||
| + | |||
| + | * OSD for sound, thinklight, brightness | ||
| + | |||
| + | {{HINT|Install the tpb package and enable the nvram kernel module (is available but not loaded by default) | ||
| + | change the rights on the /dev/nvram from 600 to 666 and include a small script like e.g. | ||
| + | #!/bin/sh | ||
| + | # | ||
| + | # start Thinkpad button support daemon | ||
| + | tpb -d -c /etc/tpbrc | ||
| + | in the <tt>~/.kde/Autostart</tt> Directory. | ||
| + | There are also other suggestions on the web about creating a 'nvram' group and adding the users to this group, but I did not do this at the moment. | ||
| + | }} | ||
=== Not tested === | === Not tested === | ||
| − | * | + | * IR Interface |
| + | * Modem (but I think it was not recognized in the installation process) | ||
Revision as of 00:44, 10 July 2006
Installation of Suse 10.1 on a T60.
Contents
System
T60 (2007-49G)
- Processor: Intel Core Duo Prozessor T2400 mit 1,83 GHz, 2 MB L2 Cache
- Ram: 512 MB 667 MHz DDR2
- HD: 60 GB SATA w Active Protection System; 5400 U/min
- CD/DVD: DVD/CD-RW Combodrive V
- Display: 14,1' (35,8 cm); TFT Display; 1400x1050 (SXGA+)
- Graphics: ATI Mobility RADEON X1300; 64 MB DDR2 SDRAM
- Communication: 10/100/1000 LAN, Intel Mini PCI PRO/Wireless 3945ABG Lan, Infrarot, 56K Int. Modem
Summary
Most of the installation went very smoothly. Many components were recognized and configured correctly.
NOTE!
To keep the "ThinkVantage" Button functionality, create a primary boot partition and let grup be installed there
LEAVE THE MBR ALONE
What works out of the box
- Intel Duo processor (dual-core)
- Network card
- Sound
- Volume control keys and the function key for the locked screensaver.
- Always working without any OS support: keyboard light and screen brightness control
- Wireless (actually worked even though it looked different at first, but then worked flawless after reboot)
- Suspend to disc and suspend to RAM (wow!)
What needs to be fixed post-install
- Graphics card (ati drivers available via ati homepage)
To enable 3D acceleration, generate own rpm's from the ati package which can then be installed either via yast or simply with rpm. You should include the kernel sources in your installation since the ati script needs it to generate the Suse specific package which in terms is needed to properly enable 3D acceleration
- OSD for sound, thinklight, brightness
Hint:
Install the tpb package and enable the nvram kernel module (is available but not loaded by default)
change the rights on the /dev/nvram from 600 to 666 and include a small script like e.g.
#!/bin/sh # # start Thinkpad button support daemon tpb -d -c /etc/tpbrc
in the ~/.kde/Autostart Directory. There are also other suggestions on the web about creating a 'nvram' group and adding the users to this group, but I did not do this at the moment.
Not tested
- IR Interface
- Modem (but I think it was not recognized in the installation process)
