Difference between revisions of "How to build your own UltraPort device"

From ThinkWiki
Jump to: navigation, search
(Pin Layout)
(Pin Layout comparison)
Line 5: Line 5:
 
==Pin Layout comparison==
 
==Pin Layout comparison==
 
The following UltraPort pin layout has been discovered through measuring the UltraPort of a ThinkPad {{X21}}. It is not very well tested, but worked well for the author of this information.
 
The following UltraPort pin layout has been discovered through measuring the UltraPort of a ThinkPad {{X21}}. It is not very well tested, but worked well for the author of this information.
 +
The information on the USB Type A connector pin layout has been copied from Wikipedia.
 
{| valign="top" style="vertical-align:top;"
 
{| valign="top" style="vertical-align:top;"
 
| style="vertical-align:top;width:50%;padding-right:40px;" |
 
| style="vertical-align:top;width:50%;padding-right:40px;" |

Revision as of 02:10, 7 February 2006

With the UltraPort connector being nothing else than a standard USB 1.1 interface with a proprietary connector, it should in theory be possible to transform any USB 1.1 device into an UltraPort device.

This idea is undermined by the fact that a mechanical adapter comes with every UltraPort device, that transforms the UltraPort connector into a standard USB connector.

Pin Layout comparison

The following UltraPort pin layout has been discovered through measuring the UltraPort of a ThinkPad X21. It is not very well tested, but worked well for the author of this information. The information on the USB Type A connector pin layout has been copied from Wikipedia.

UltraPort connector

1 2 3 4 5 6 7 8 9 10 11 12 13
GND 0 VCC VCC GND D+ D- GND .  ?  ?  ? 0 GND

Standard USB Type A connector

4 3 2 1
GND D+ D- VCC
Pin Name Description
1,5,8,13 GND Ground
2,12 0 probably not connected
3,4 VCC +5 V DC
6 D+ Data +
7 D- Data -
9,10,11 ? unidentified
. it is fastener not a pin
Pin Name Cable color Description
1 VCC red +5 V DC
2 D+ white Data +
3 D- green Data -
4 GND black Ground