Difference between revisions of "Extending battery life on X200"

From ThinkWiki
Jump to: navigation, search
Line 14: Line 14:
 
**I used Powertop from [[www.lesswatts.org]] for this task.
 
**I used Powertop from [[www.lesswatts.org]] for this task.
 
* '''Lowering the voltage supplied to the CPU.'''  
 
* '''Lowering the voltage supplied to the CPU.'''  
** Lowering the voltage supplied to the CPU has other positive side effects beside battery life: my system runs a lot cooler and ...
+
** Lowering CPU voltage does ''not'' impact performance since the clock frequency is unaffected
** Lowering CPU voltage does ''not'' affect performance since the clock runs at the same speeds (22700, 22600, 16000, or 800Mhz for the X200).
 
 
**I used phc patches and phctools available at [[www.linux-phc.org]] for this task.
 
**I used phc patches and phctools available at [[www.linux-phc.org]] for this task.
 
*'''Turning off radios you do not need'''
 
*'''Turning off radios you do not need'''
**The X200 has a button to turn off all radios, best way to reduce power supply when not using wireless
+
**My X200 has 3 wireless radios: Wifi, Blutooth, Broadband wireless
**
 
 
== Finding and removing high interrupt packages ==
 
== Finding and removing high interrupt packages ==
 
===Installing Powertop===
 
===Installing Powertop===

Revision as of 18:07, 3 March 2009

Overview

I own the beautiful Lenovo X200 and run Ubuntu Intrepid on the machine. Its battery life is significantly lower than that under Windows and many users have reported that it runs hotter than under Windows.

With the changes below and a 9 cell battery I get over 9 hours on an idle system with backlight on but at the lowest level and wireless radios off. Before the changes I was only getting 5 hours.

The system also runs a lot cooler and I do not need tpfan (sw fan control for the ThinkPad available here), the built-in hw controller falls back to the lower speeds shortly after a CPU load subsides.

Details

The changes fall into 3 categories:

  • Removing packages that create unnecessarily frequent wake up interrupts.
    • These interrupts wake up the CPU, preventing it from staying in its most energy efficient state.
    • I used Powertop from www.lesswatts.org for this task.
  • Lowering the voltage supplied to the CPU.
    • Lowering CPU voltage does not impact performance since the clock frequency is unaffected
    • I used phc patches and phctools available at www.linux-phc.org for this task.
  • Turning off radios you do not need
    • My X200 has 3 wireless radios: Wifi, Blutooth, Broadband wireless

Finding and removing high interrupt packages

Installing Powertop

Turning off DRI

Turning off Gnome Power Manager

Turning off SCIM

Reducing CPU voltage

Installing phc module patches

Intalling phctools

Experimenting with lower voltages

Making the voltages stick

Turning off the wireless radios