Difference between revisions of "1859-4AU"

From ThinkWiki
Jump to: navigation, search
(Installing Fedora 7)
Line 46: Line 46:
  
 
==== Installing Fedora 7 ====
 
==== Installing Fedora 7 ====
 +
* To avoid problems when the computer is turned on with external monitor connected:
 +
** BIOS setting: Configure Display: Startup on Internal LCD (not Both)
 +
 
* To get the native 1400x1050 internal LCD resolution:
 
* To get the native 1400x1050 internal LCD resolution:
 
** Install 915resolution
 
** Install 915resolution
Line 57: Line 60:
 
Intel 82801FB/FBM/FR/FW/FRW (ICH6 family) AC'97 Modem Controller
 
Intel 82801FB/FBM/FR/FW/FRW (ICH6 family) AC'97 Modem Controller
  
* Edit  xorg.conf to enable different desktop on external monitor.
+
* Edit  xorg.conf to enable different desktop on external monitor.
 +
 
  
 
Thinkpad Family: {{R52}}
 
Thinkpad Family: {{R52}}
 
[[Category:Models]]
 
[[Category:Models]]

Revision as of 02:06, 8 June 2007

Hardware Specifications of Thinkpad R52 Machine Type 1859-4AU

Thinkpad Hardware Maintenance Manual

Installing Fedora Core 5

  • Aside from the following PCM issue, the configuration challenges are the routine issues of deciding on your partitioning and deciding which packages to include.
  • After the first reboot, the installation process asks your choice for default PCM device. The two options are: Intel ICH - Intel ICH6 / Intel ICH - IEC958.

I have no idea which to choose, and don't know if the choice is one that can easily be changed later. There is no obvious external digital output, so I choose the first and hope for the best.

  • After the initial install, in order to get the system up to date, you will have to TWICE as root issue the command:

# yum update and then wait a long time for each update to complete, as there may be around 100 packages updated each time.

  • see 1400x1050 on Intel 915GM. Download and install 915resolution and add to /etc/rc.local the line: 915resolution 3c 1400 1050
  • Getting suspend and resume to work:
    • Check BIOS setting: Power On; Press F1 to enter BIOS settings. Check that the value for Config -> Power -> "Allow suspend mode on legacy OS" is: Enabled. On my system, this BIOS option did not affect FC4; however FC5 would not resume properly if the setting was Disabled.
    • To /boot/grub/grub.conf add to the relevant lines beginning "kernel" the following option: acpi_sleep=s3_bios
    • To /usr/sbin/pm-suspend, following the line echo -n "mem" > /sys/power/state, add the line: 915resolution 3c 1400 1050
  • Controlling cpuspeed: My preference is to edit /etc/cpuspeed.conf, commenting out -n and adding OPTS="$OPTS -s 0 -i 1 -r -p 45 50". My CPU use patterns are high spikes with low idles so this provides maximum responsiveness but generally keeps the CPU at (ambient temperature + 20 degrees Celsius).


Installing Fedora 7

  • To avoid problems when the computer is turned on with external monitor connected:
    • BIOS setting: Configure Display: Startup on Internal LCD (not Both)
  • To get the native 1400x1050 internal LCD resolution:
    • Install 915resolution
    • Edit /etc/sysconfig/915resolution to have the line

RESOLUTION="3c 1400 1050"

  • To get the internal display to resume properly after suspend (instead of the ghostly glow)
    • Make an executable file /etc/pm/config.d/r52.cfg with

DISPLAY_QUIRK_S3_BIOS=true

  • Not sure how to get the modem working; the installer identifies it as

Intel 82801FB/FBM/FR/FW/FRW (ICH6 family) AC'97 Modem Controller

  • Edit xorg.conf to enable different desktop on external monitor.


Thinkpad Family: R52