Difference between revisions of "1859-4AU"

From ThinkWiki
Jump to: navigation, search
(Installing Fedora 7: added nonideal xorg.conf)
(Hardware Specifications of Thinkpad {{R52}} Machine Type 1859-4AU)
 
(4 intermediate revisions by 3 users not shown)
Line 11: Line 11:
 
* [[UltraBay|UltraBay Enhanced]] with the following:
 
* [[UltraBay|UltraBay Enhanced]] with the following:
 
** CD-RW/DVD-ROM Combo drive : 24x24x24x/8x CD-RW/DVD
 
** CD-RW/DVD-ROM Combo drive : 24x24x24x/8x CD-RW/DVD
* [[Ethernet Controllers#Broadcom Gigabit (10/100/1000)|Broadcom 10/100/1000]] Ethernet
+
* [[Broadcom Gigabit Ethernet (10/100/1000)]]
 
* [[CDC slot]] with:
 
* [[CDC slot]] with:
 
** [[IBM Integrated 56K Modem (MDC-2)]]
 
** [[IBM Integrated 56K Modem (MDC-2)]]
Line 52: Line 52:
 
** Install 915resolution
 
** Install 915resolution
 
** Edit /etc/sysconfig/915resolution  to have the line
 
** Edit /etc/sysconfig/915resolution  to have the line
RESOLUTION="3c 1400 1050"
+
RESOLUTION="3c 1400 1050"
 
* To get the internal display to resume properly after suspend (instead of the ghostly glow)
 
* To get the internal display to resume properly after suspend (instead of the ghostly glow)
 
** Make an executable file  /etc/pm/config.d/r52.cfg with
 
** Make an executable file  /etc/pm/config.d/r52.cfg with
DISPLAY_QUIRK_S3_BIOS=true
 
  
* Edit xorg.conf to enable different desktop on external 1280x1024 monitor: to Section "Screen", Identifier "Screen0", add
+
  #!/bin/sh
**                Virtual 2680 1050
+
DISPLAY_QUIRK_S3_BIOS=true
** May need to add Monitor2 info
 
** script to run when in X:
 
  
#!/bin/sh
+
RichardHughes: '''Please DO NOT do this'''. Please see the [http://people.freedesktop.org/~hughsient/quirk/index.html quirks pages] for a better fix
xrandr --output VGA --right-of LVDS --off >/dev/null 2>&1 || :
 
xrandr  -s 1400x1050  >/dev/null 2>&1 || :
 
if xrandr | grep "VGA connected"; then
 
xrandr --output VGA --right-of LVDS --auto
 
fi
 
  
* Internal Modem identified as Intel 82801FB/FBM/FR/FW/FRW (ICH6 family) AC'97 Modem Controller
+
* Edit  xorg.conf to enable different desktop on external 1280x1024 monitor: to Section "Screen", Identifier "Screen0", Subsection "Display" add
** Driver available at http://www.linuxant.com/drivers/hsf/downloads-installer.php
+
Virtual 2680 1050
  
What follows is not perfect, but a guideline:
+
* script to run when in X:
# Xorg configuration created by pyxf86config
 
 
 
Section "ServerLayout"
 
        Identifier    "Default Layout"
 
        Screen      0  "Screen0" 0 0
 
        InputDevice    "Keyboard0" "CoreKeyboard"
 
        InputDevice    "Synaptics" "CorePointer"
 
        Screen      1  "Screen1" RightOf "Screen0"
 
        Option "Xinerama" "off"
 
EndSection
 
 
 
Section "InputDevice"
 
        Identifier  "Keyboard0"
 
        Driver      "kbd"
 
        Option      "XkbModel" "pc105"
 
        Option      "XkbLayout" "us"
 
EndSection
 
 
 
Section "InputDevice"
 
        Identifier  "Synaptics"
 
        Driver      "synaptics"
 
        Option      "Device" "/dev/input/mice"
 
        Option      "Protocol" "auto-dev"
 
        Option      "Emulate3Buttons" "yes"
 
EndSection
 
 
 
Section "Monitor"
 
### Comment all HorizSync and VertSync values to use DDC:
 
### Comment all HorizSync and VertSync values to use DDC:
 
        Identifier  "Monitor0"
 
        VendorName  "Monitor Vendor"
 
        ModelName    "LCD Panel 1400x1050"
 
### Comment all HorizSync and VertSync values to use DDC:
 
#      HorizSync    31.5 - 90.0
 
#      VertRefresh  59.0 - 75.0
 
        Option      "dpms"
 
EndSection
 
 
 
Section "Monitor"
 
        Identifier  "Monitor1"
 
        VendorName  "Monitor Vendor"
 
        ModelName    "Sony CPD-420GS/GST/19GS2"
 
### Comment all HorizSync and VertSync values to use DDC:
 
      HorizSync    30.0 - 96.0
 
      VertRefresh  40.0 - 151.0
 
        Option      "dpms"
 
EndSection
 
 
 
Section "Device"
 
        Identifier  "Videocard0"
 
        Driver      "intel"
 
EndSection
 
 
 
Section "Screen"
 
        Identifier "Screen1"
 
        Device    "Videocard0"
 
        DefaultDepth    24
 
        Monitor "Monitor1"
 
        SubSection "Display"
 
                Viewport  0 0
 
                Depth    24
 
                Modes "1280x1024" "1024x768"
 
        EndSubSection
 
EndSection
 
 
 
Section "Screen"
 
        Identifier "Screen0"
 
        Device    "Videocard0"
 
        DefaultDepth    24
 
        Monitor "Monitor0"
 
        SubSection "Display"
 
                Viewport  0 0
 
                Depth    24
 
                Virtual 2680 1050
 
                Modes "1400x1050" "1280x1024" "1024x768"
 
        EndSubSection
 
EndSection
 
  
 +
#!/bin/sh
 +
xrandr --output VGA --right-of LVDS --off >/dev/null 2>&1 || :
 +
xrandr  -s 1400x1050  >/dev/null 2>&1 || :
 +
if xrandr | grep "VGA connected"; then
 +
xrandr --output VGA --right-of LVDS --auto
 +
fi
  
 +
* Internal Modem identified as Intel 82801FB/FBM/FR/FW/FRW (ICH6 family) AC'97 Modem Controller
 +
** Driver available at http://www.linuxant.com/drivers/hsf/downloads-installer.php
  
 
Thinkpad Family: {{R52}}
 
Thinkpad Family: {{R52}}
[[Category:Models]]
 

Latest revision as of 14:30, 2 March 2010

Hardware Specifications of Thinkpad R52 Machine Type 1859-4AU

Thinkpad Hardware Maintenance Manual

Installing Fedora Core 5

  • Aside from the following PCM issue, the configuration challenges are the routine issues of deciding on your partitioning and deciding which packages to include.
  • After the first reboot, the installation process asks your choice for default PCM device. The two options are: Intel ICH - Intel ICH6 / Intel ICH - IEC958.

I have no idea which to choose, and don't know if the choice is one that can easily be changed later. There is no obvious external digital output, so I choose the first and hope for the best.

  • After the initial install, in order to get the system up to date, you will have to TWICE as root issue the command:

# yum update and then wait a long time for each update to complete, as there may be around 100 packages updated each time.

  • see 1400x1050 on Intel 915GM. Download and install 915resolution and add to /etc/rc.local the line: 915resolution 3c 1400 1050
  • Getting suspend and resume to work:
    • Check BIOS setting: Power On; Press F1 to enter BIOS settings. Check that the value for Config -> Power -> "Allow suspend mode on legacy OS" is: Enabled. On my system, this BIOS option did not affect FC4; however FC5 would not resume properly if the setting was Disabled.
    • To /boot/grub/grub.conf add to the relevant lines beginning "kernel" the following option: acpi_sleep=s3_bios
    • To /usr/sbin/pm-suspend, following the line echo -n "mem" > /sys/power/state, add the line: 915resolution 3c 1400 1050
  • Controlling cpuspeed: My preference is to edit /etc/cpuspeed.conf, commenting out -n and adding OPTS="$OPTS -s 0 -i 1 -r -p 45 50". My CPU use patterns are high spikes with low idles so this provides maximum responsiveness but generally keeps the CPU at (ambient temperature + 20 degrees Celsius).


Installing Fedora 7

  • To avoid problems when the computer is turned on with external monitor connected:
    • BIOS setting: Configure Display: Startup on Internal LCD (not Both)
  • To get the native 1400x1050 internal LCD resolution:
    • Install 915resolution
    • Edit /etc/sysconfig/915resolution to have the line
RESOLUTION="3c 1400 1050"
  • To get the internal display to resume properly after suspend (instead of the ghostly glow)
    • Make an executable file /etc/pm/config.d/r52.cfg with
#!/bin/sh
DISPLAY_QUIRK_S3_BIOS=true

RichardHughes: Please DO NOT do this. Please see the quirks pages for a better fix

  • Edit xorg.conf to enable different desktop on external 1280x1024 monitor: to Section "Screen", Identifier "Screen0", Subsection "Display" add
Virtual 2680 1050
  • script to run when in X:
#!/bin/sh
xrandr --output VGA --right-of LVDS --off >/dev/null 2>&1 || :
xrandr  -s 1400x1050  >/dev/null 2>&1 || :
if xrandr | grep "VGA connected"; then
xrandr --output VGA --right-of LVDS --auto
fi

Thinkpad Family: R52