Installation instructions for the ThinkPad T41p

From ThinkWiki
Revision as of 01:35, 31 October 2004 by Wyrfel (Talk | contribs) (page created)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Graphics

Chip (internal, AGP): ATI Radeon FireGL T2

coming soon...

Chip (ATI Radeon 9000 in docks PCI): ATI Radeon 9000

You will have to enable ati drivers when you compile X. DRI support is present starting from XFree86 4.3.0. However, it segfaulted on my machine until i updated to 4.3.99.902, so 4.4.0 should work. OpenGL apps were still very slow until i set the R200_NO_TCL environment variable. It disables hardware TCL support, so i guess the driver is still buggy in this field. Now i'm getting framerates a bit below 600 fps with glxgears, which i think is quite ok for a PCI based card in a dock.

Drives

Harddisk: IBM Travelstar ...

coming soon...

DVD/CDRW Combo: Toshiba SD-R9012

coming soon...

Ultrabay 2000 ZIP Drive (in docks Ultrabay 2000)

coming soon...

Sound: ...

coming soon...

Networking

LAN: ...

coming soon...

Wireless LAN

coming soon...

Modem

coming soon...

PCMCIA

Just enable the PCMCIA support in the kernel configuration and with it the cardbus driver and the thing will work great. I tested a Xircom CardCaddy as well as some other CompactFlash adapter. Both worked.

USB

coming soon...

Specials

UltraBay

coming soon...

Thinklight

coming soon...

Function keys

coming soon...

Trackpoint

coming soon...

Touchpad

coming soon...

Docking Station (IBM ThinkPad Full Dock II)

The thing works great. PCMCIA and all the ports were recognised by default. The docks IDE interface is a CMD 648, so you should enable the according kernel option (building as module didn't work for me), if you want to use anything else than a floppy in the docks UltraBay. Note that the interface will most likely be ide2 and ide3 then, so the docks UltraBay drive will be hde.

Power Management

The T41p is APM and ACPI capable. more coming...