Install Classic Keyboard on xx30 Series ThinkPads
The Lenovo Thinkpad xx30 series (T430, X230, T530) was the first generation to use chiclet style keys. The keys generally feel the same in regards to actuation, but they use a new "chiclet" style shape, and the new 6-row layout is missing keys compared to the 7-row layout used on the T420. (Comparison: T430 | T420)
Many ThinkPad fans end up recommending the xx20 series (T420, X220, T520), because they were the last Thinkpads to feature the classic keyboard. However, the xx30 series uses Intel Ivy Bridge processors, with greater power savings and the vastly improved Intel HD Graphics 4000 GPU.
Since the xx20 classic keyboards fit into the xx30 chassis, you can have your cake, and eat it, too!
This guide will explain exactly how to replace your xx30's keyboard with an xx20 Classic keyboard. (Personally, I used a T410/T410p keyboard, but the T420/X220 keyboards share the same FRU and should work as well.)
Please experiment, and if you get it working, feel free to email me.
Contents
Required Components
A compatible ThinkPad
The disassembly process below is designed for the T430. The rest of the xx30 series (X230, T530, W530, etc.) use the same T410/T420 keyboard, but the disassembly process will differ, so check the Lenovo Hardware Maintenence Manual for those.
I will only help you with issues if you're using a T430, because that's all I have experience with.
The T440 is not supported, since the chassis, palmrest, touchpad and Trackpoint keys were completely redesigned. Thus, there is no room for the lip on the bottom of the T410/T430 keyboard that houses the TrackPoint's clickers.
A compatible keyboard
FRU | 45N2071 |
---|---|
approx. cost | $45 + $4.99 shipping (Amazon) |
suppliers | IBM/Laptop Parts Plus (USA) |
I used the T410/T420 U.S. English keyboard, model number 45N2071. Please be sure to look at the part numbers here in order to assure you buy the right region-specific keyboard.
Use the first model number listed - for example, the first model number for the Polish region is 45N2092, NOT 45N2162. If you use the second or third model numbers, you'll get the correct region keyboard, but it will be made by a different manufacturer, and will use different key switches.
The T400 keyboard won't work. It fits to a different footprint in the chassis, has different screw holes, and it's overlay keys (Mute, Power) lack LEDs. The additional power being sent to the power/mute keys in order to power the LED would go nowhere. The feedback might actually cause an error.
Warning
Key Functionality
Please note that the installation is not perfect. Since the BIOS interprets keypresses, some keys are not detected at all, others have different functions; and all Fn commands are the ones listed on the T430 keyboard.
- The T410's keyboard is printed to have Fn+PageUp activate the Thinklight.
- However, because this action is actually bound to Fn+Space on the T430 keyboard, you will need to press Fn+Space to activate the ThinkLight after installing the T410 keyboard.
- Fn+F8 does not toggle the TrackPoint/touchpad input, it actually dims the brightness.
- Fn+F4 makes the computer sleep, as that is the combo on both keyboards.
Possible BIOS Mod
It should be possible to modify the BIOS to enable these keys. The T430 Japanese keyboard has 5 extra keys, and Middleton made an Fn-Ctrl swap a standard feature of his custom BIOSes in past ThinkPads. Unfortunately, nobody has attempted to make such a modification; especially since a hardware BIOS flasher is required to modify the BIOS in Ivy Bridge motherboards.
Keymap Table
A full table of keys and their compatibility is listed below.
DNF means Does Not Function.
Key | Function after install | Notes | |
---|---|---|---|
A-Z | A-Z | ||
0-9 | 0-9 | ||
PrtScr/SysRq | DNF | The Menu Key functions as PrtScr | |
ScrLk/NumLk | DNF | ||
Pause/Break | DNF | ||
Insert | DNF | Can be rebound to a combo if needed | |
Delete | Home | Can be rebound to Delete using SharpKeys | |
Home | DNF | Can be rebound to a combo if needed | |
End | End | ||
PgUp | Delete | Can be rebound to PgUp using SharpKeys | |
PgDown | Insert | Can be rebound to PgDown using SharpKeys | |
F1-F9 | F1-F9 | ||
F10 | DNF | Can be rebound to a combo if needed, but will never work in the BIOS | |
F11-F12 | F11-F12 | ||
Esc | Esc | ||
Tilde | Tilde | ||
Tab | Tab | ||
CapsLk | CapsLk | The T410's LED indicator does not work - uses the T430's built-in onscreen indicator | |
R&L Shift | R&L Shift | ||
Fn | Fn | The BIOS LCtrl & Fn swap does work | |
R&L Ctrl | R&L Ctrl | The BIOS LCtrl & Fn swap does work | |
R&L Windows | R&L Windows | ||
R&L Alt | R&L Alt | ||
Space | Space | ||
Menu | PrtScr | This key is actually PrtScr on the T430 keyboard, and functions as such when the T410 keyboard is installed. Because of this, there is no Menu key. For me, it appears that this causes the Menu Key to turn on and off at will. Please see this section for more detail. | |
PgLeft | PgUp | Can be rebound to PgLeft using SharpKeys | |
PgRight | PgDown | Can be rebound to PgRight using SharpKeys | |
Enter | Enter | ||
Backspace | Backspace | ||
Punctuation | Punctuation | Too excessive to list, but all work normally | |
Power/Mute/MicMute/VolUp/VolDown/ThinkVantage | All work | All of the overlay keys work, as well as their LEDs | |
TrackPoint/left/middle/right | All work | The TrackPoint works perfectly on the X230. It should work on the T430, but wasn't tested; the original author's T430 had soda spilled on it, shorting out his TrackPoint socket. |
The replacement (T430)
Removing the old keyboard
Removing the old keyboard will require you to remove the memory module cover (RAM cover), after which you must unscrew two long screws above and below the mSATA slot. From there, you just need to push the keyboard up, and remove it from its place. You should follow the official instructions in order to do this.
Method 1: Replace the xx30 Palmrest with a xx20 Palmrest
The least invasive method is to replace the entire xx30 (T430/X230/W530) Palmrest with the xx20 (T420/X220/W520) Palmrest. The palmrest costs about $10-20 on eBay, search for these FRU numbers:
- T420 Palmrest
- No fingerprint reader - 04W1371, 04W1372
- X220 Palmrest
- No fingerprint reader - 04W1411
- With fingerprint reader - 04W1410
It's pretty simple:
- Remove and unplug the original palmrest.
- Install and plug in the xx20 palmrest.
- Then insert the keyboard; it should fit perfectly.
Method 2: Sand down the nubs to fit in the T430 Palmrest
If you're a cheapskate, you can modify the keyboard to fit your T430 palmrest instead.
Along the bottom edge of the T430 keyboard are four small nubs that fit into place along four idents in the chassis. These nubs help secure the keyboard into place, and make sure it is aligned correctly. The classic keyboard, however, has five nubs - and they're much thicker. Whereas the T430 nubs are only extensions of the metal plate covering the back of the keyboard, the classic nubs actually extend upwards and fit the entire thickness of the keyboard. The classic's fifth nub is located under the TrackPoint keys.
I was able to flatten these nubs enough that my classic keyboard slides into place, although it is a very ugly seam.
An alternative method is to clip off the nub near the TrackPoint key, and sand away the extra thickness off the other four nubs using a $20 Dremel. Then, use a black Sharpie to color the exposed metal.
Installing the new keyboard
After the nubs have been taken care of, the rest of the keyboard installation should be very simple. Just follow the instructions from the Lenovo official guide in reverse, being sure to bend the keyboard connector back the way it was done on the T430's, and NOT twisting it to match. You'll know your keyboard was installed correctly when you can actually install both screws completely.
Handling mismatched keys in software
Not all of the keys work correctly, as detailed in the Keymap Table. However, if a key performs an action, that action can be rebound on a system-wide level to any other action.
Linux
This can be done using udev keymap. I don't use Linux, and so I won't provide instructions for that here, but that page should give all the information you need to get it working, along with the Keymap Table's stock remaps. Note that keys that are labelled DNF will never work - this is a BIOS-level issue and no operating system tweaks will fix it.
Windows
On Windows, we can use a nifty program called SharpKeys to rebind keys. The program is creates a registry entry in order to remap. Despite the fact that it is portable and does not run upon starting the machine, I suggest you keep the application handy in case Windows overwrites the remap key - this has only happened a few times for me while tweaking things, but it's enough reason to keep the 500kb application installed.
Once you've installed SharpKeys, add four remaps corresponding to the ones on the right, and then click "Write to Registry". Log out of Windows, and when you log back in, your PgUp, Delete, and PgDown keys should be functioning as normal.
Menu Key
The last remap in SharpKeys, Unknown > Turn Key Off, corresponds to disabling the Menu key (key 0x0075). Without this entry, my keyboard was making all left clicks act as though the Menu key was being held down. You may not need this entry, but if you do, be sure to add it. I believe this stems from the fact that there is no Menu Key on the T430 keyboard, but I'm not sure why it was constantly signalling itself as on.
Conclusion
While some keys won't work, it is completely possible to transplant a T410/T420 keyboard into a T430 and use it almost as if nothing ever changed. Now you too can have an Ivy Bridge ThinkPad with a classic keyboard.
If this guide helped you at all, feel free to send me an email, and if you have any comments or criticism, be sure to send that, too! I'll try and keep this guide up to date as best I can in order to support users looking to make the switch.
Experiment: T430 Keyboard in a T420 with BIOS Mod
While it would require a hardware flash, many people would probably be willing to modify their T430 BIOS to use the old keyboard layout. There is no electronic IC in the keyboard, so all keylayouts are defined in the BIOS. The key is to figure out exactly how to change the keyboard layout.
The Japanese T430 keyboard has more keys than the typical T430 keyboard, yet is autodetected and works perfectly fine. Could it be possible to put in support for the T420's extra keys by registering it as a "new" keylayout? The FN and Ctrl keys could be swapped thanks to the Middleton BIOS, so it's perfectly plausible.
In order to work more freely (rather than struggle under a hardware BIOS flash), we can experiment the other way around: install a T430 Keyboard layout on the T420 BIOS.
Differences
There are a few differences and missing keys between the T430 Keyboard and the T420 keyboard when installed on the T420. For the most part, every single F1-F12, character, number, and symbol key is detected in the right place. However, all the function key combos will stay the same as on the T420, and there are only 4 keys representing the now missing 7th row, so here's their functions:
- Home - Delete key.
- End - End key. Still can be used as a function key to reduce the brightness.
- Insert - Page Down key.
- Delete - Page Up Key. Still works for ThinkLight function key combo.
- PrtSc - Context Menu key.
The missing keys are: PrtSc/SysRq, ScrLk/NmLk, Pause/Break, Insert, and Home.
In addition, for the T430 Japanese layout, as long as the keyboard layout is set to Japanese layout, every single F1-F12, character, number, and symbol key works. However, the three additional keys next to the space bar have not yet been tested.
Experimental X230 Embedded Controller Mod
It is now possible to modify the firmware on your Thinkpad x230 to correctly use the x220 keyboard. This (or a similar process) may work for other x*30 series thinkpads, but has only been tested on an x230. For more information, you can get a message to Hamish by adding a message to the thread on the thinkpads forum [1].
Recently, an enterprising X230 owner wanted to use an unauthorized battery in his laptop[2]. As part of this, he worked out how to update the firmware running on the laptop Embedded Controller. This is the micro-controller that scans the keyboard and sends keypress events to the rest of the system. So, now that we can update the firmware, we can locate and patch the keyboard tables.
Using the tools that zmatt wrote[3], a couple of people have been experimenting with patches for supporting the x220 keyboard (see [4] and [5])
Currently, the normal keyboard functions work perfectly. The capslock light is missing and the Fn+F2, Fn+F3, Fn+F12 and Fn+Space key combinations do not work, however it is perfectly usable like this.
Steps to patch your Firmware
To try this out yourself, follow these steps:
- get the latest EC firmware[6] and extract the G2ETA6WW/$01D3000.FL2 firmware file
- clone and compile the mec-tools[7]
- using the instructions in the mec-tools, extract the mec-decrypted.bin firmware (confirm your sha1sum matches mine d70f5434ef316a66a6195651d9e231e84a2464a1)
- patch the keysym and live_key tables using a hex editor with the patch details below
- using the instructions from the mec-tools repack the firmware and reembed into the BIOS update file (my sha1sum for my updated $01D3000.FL2 file is 56dadd1633b0a983b4d29f344864a27a2b6ebcde)
- boot to a DOS environment and use the flash tools from the firmware update to reflash the EC firmware:
dosflash /sd /ipf ec /file $01D3000.FL2
Patch details:
00021660 98 f4 01 00 b0 8e 01 00 b4 8e 01 00 c0 70 c0 71 |.............p.q| -00021670 c0 72 c7 73 e4 78 e5 77 c0 76 c0 00 c0 00 c0 97 |.r.s.x.w.v......| -00021680 c0 00 c8 00 c0 02 c0 03 00 00 c6 3d 00 00 00 00 |...........=....| -00021690 00 00 c0 00 c0 74 c0 75 00 00 00 00 00 00 00 00 |.....t.u........| +00021670 c0 72 c7 73 e4 50 e5 51 c0 76 c0 77 c0 78 c0 97 |.r.s.P.Q.v.w.x..| +00021680 c0 7a c8 00 c0 02 c0 03 00 00 c6 55 00 00 00 00 |.z.........U....| +00021690 00 00 c0 3d c0 74 c0 75 00 00 00 00 00 00 00 00 |...=.t.u........| 000216a0 c0 a0 00 00 08 00 00 00 4c 16 02 00 1b 00 00 00 |........L.......| 00021880 69 00 00 6c 00 00 00 00 00 00 00 00 63 00 68 6a |i..l........c.hj| -00021890 00 00 00 00 00 00 00 00 79 6d 00 7a 58 00 7b 6f |........ym.zX.{o| -000218a0 00 32 46 02 20 44 01 26 7d 00 1a 7e 00 00 00 00 |.2F. D.&}..~....| +00021890 00 00 00 00 00 00 00 00 7c 44 01 7d 5a 00 7e 46 |........|D.}Z.~F| +000218a0 02 4f 6d 00 53 6b 00 54 58 00 59 6f 00 00 00 00 |.Om.Sk.TX.Yo....| 000218b0 9e 9e 00 9f 9f 00 4a 4a 00 00 00 00 b2 00 00 00 |......JJ........| 00021950 00 00 00 00 00 00 00 00 78 79 0e 0f 1d 74 2b 3d |........xy...t+=| -00021960 00 00 00 00 00 00 00 00 00 7b 00 9b 00 00 00 59 |.........{.....Y| -00021970 00 00 00 00 00 00 00 00 50 7a 9a 99 98 97 a0 54 |........Pz.....T| -00021980 00 00 00 00 00 00 00 00 4c 4b 00 00 7c 00 55 56 |........LK..|.UV| -00021990 00 00 00 00 00 00 00 00 00 51 00 00 00 53 00 4f |.........Q...S.O| -000219a0 00 00 00 00 00 00 00 00 00 00 00 00 00 3c 00 3e |.............<.>| +00021960 00 00 00 00 00 00 00 00 4b 7b 00 9b 00 00 00 59 |........K{.....Y| +00021970 00 00 00 00 00 00 00 00 4c 7a 9a 99 98 97 a0 54 |........Lz.....T| +00021980 00 00 00 00 00 00 00 00 55 56 00 00 9c 00 89 8a |........UV......| +00021990 00 00 00 00 00 00 00 00 50 51 00 00 00 53 7e 4f |........PQ...S~O| +000219a0 00 00 00 00 00 00 00 00 00 7c 7d 00 00 3c 00 3e |.........|}..<.>| 000219b0 00 00 00 00 00 00 00 00 00 00 00 2c 00 00 39 00 |...........,..9.| 000219c0 00 00 00 00 00 00 00 00 3a 00 00 00 00 00 40 00 |........:.....@.| 000219d0 00 00 00 00 00 00 00 96 00 9d 00 9e 9f 4a 3a 9c |.............J:.| 000219e0 7d 7e 00 00 00 00 00 00 ff 00 7f 00 7f 00 ff 00 |}~..............| -000219f0 ff 00 ff 00 ff 00 ff 00 ff 00 8a 00 ff 00 d3 00 |................| -00021a00 a2 00 a0 00 48 00 41 80 fa 03 00 00 a0 97 00 00 |....H.A.........| +000219f0 ff 00 ff 00 ff 00 ff 00 ff 00 8b 00 ff 00 d3 00 |................| +00021a00 e3 00 a6 00 48 00 41 80 fa 03 00 00 a0 97 00 00 |....H.A.........| 00021a10 10 01 00 00 d8 18 02 00 e8 19 02 00 0c 1a 02 00 |................|
Future Work
I am continuing to search for the table that fixes the remaining four Fn-X key combinations, but all the low-hanging fruit has been taken, so I need to understand the embedded controller firmware by disassembling it. This is taking some time.