Installing Gentoo on a ThinkPad T410
Contents
- 1 Model
- 2 General
- 3 Graphics: NVIDIA Quadro NVS 3100M (GT218)
- 4 Sound: AD1984
- 5 Network: Intel E1000 NIC, WiFi Link 6000 Series WNIC, Bluetooth
- 6 Ports: USB, HDMI, IEEE 1394 Firewire
- 7 Drives
- 8 Input
- 9 Suspend
- 10 Integrated Fingerprint Reader
- 11 Integrated Webcam
- 12 Integrated Card reader
- 13 Thinklight
- 14 Power saving
- 15 ibm-acpi
- 16 Configuration Files
- 17 Kernel 2.6.36
- 18 Links
Model
Lenovo Thinkpad T410
General
This installation instruction describes the steps after a Gentoo base installation. Please read the gentoo handbook for installation instructions
Working:
- Keyboard, UltraNav input (Touchpad and NavPoint)
- Drives
- X11 with nVidia including acceleration
- Network, wireless network and bluetooth
- Sound
- Suspend to RAM
- Suspend to Disk (Hibernate)
- ThinkLight
- ACPI (Battery, CPU Frequency, Fan, Temperature, ...)
- Webcam
- Fn Key combinations
- Hot swapping of optical drive (UltraBay)
- HDD Acceleration Meter (can be used as an input device)
- Harddisk protection
- Card reader: SD Card
Not tested:
- Firewire (should work as it is recognized, no devices for testing)
- E-Sata (should work, no devices for testing)
- Express Card Slot (should work, no devices for testing)
- Docking Station (should work according to several sources, no devices for testing)
- Card Reader: Memory Stick
Graphics: NVIDIA Quadro NVS 3100M (GT218)
To install and configure the nVidia driver, just emerge nvidia-drivers. You might be interested in the ~arch masked drivers.
Framebuffer works fine with vga=0x361. hwinfo --framebuffer displays all supported resolutions.
The brightness control needs a workaround. Add
Option "RegistryDwords" "EnableBrightnessControl=1"
to your xorg.conf
Performance of the card depends heavy on powermizer and some nvidia settings.
In recent nvidia drivers, powermizer can be configured via `nvidia-settings`
<bash>
- !/bin/sh
if [ -z "$1" ] then
echo "Powermizer control script." echo "2010 by Christian \"Fuchs\" Loosli." echo "" echo "usage: powermizer on | off"
else
if [ $1 = "on" ] then nvidia-settings -a [gpu:0]/GPUPowerMizerMode=0 fi if [ $1 = "off" ] then nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1 fi
fi exit 0 </bash>
This script turns powermizer on or off. You can use it together with acpi events or your power management to turn powermizer off as soon as your notebook is powered via AC.
Sound: AD1984
Works out of the box. The microphone might has to be unmuted via alsamixer. If you are using pulse audio, check pavucontrol as well.
The mute button and the volume up and volume down buttons work as well but you need to configure them first. You can use xmodmap to bind a key to them and then either bind a amixer command to them, or set them as hotkeys in your mixer application (kmix, gnome-mixer, ...) Please note that some mixer applications take the wrong mixer (the hdmi output) as the default, so you have to change the default / primary mixer.
Network: Intel E1000 NIC, WiFi Link 6000 Series WNIC, Bluetooth
The integrated e1000 LAN NIC works out of the box.
For wireless you have to emerge the net-wireless/iwl6000-ucode package. You have to enable iwlwifi / iwlagn in your kernel configuration.
Don't forget that the interface (wlan0) has to be set as up (ifconfig wlan0 up) before scanning and associating works.
Bluetooth works out of the box with blueZ. You can disable / enable bluetooth via proc, with a script similar to this one:
<bash>
- !/bin/sh
bluetooth=`head -n 1 /proc/acpi/ibm/bluetooth | awk '{print $2}'` case "$bluetooth" in
disabled) echo "enable" > /proc/acpi/ibm/bluetooth
;;
enabled) echo "disable" > /proc/acpi/ibm/bluetooth ;;
esac exit 0 </bash>
or directly with the proc interface. This script helps you to bind it to a key combination.
Note that the hardware killswitch on the front works as well, but disables both bluetooth and WLAN
Ports: USB, HDMI, IEEE 1394 Firewire
USB works out of the box.
Firewire is untested but should work, as the port is recognized and the module loaded.
HDMI is untested, but as it is recognized (including the alsa audio device) it should work.
Drives
The optical drive and hard drive work out of the box, with AHCI disabled or enabled in the BIOS.
If you run a dualboot system with windows <= 5.1 (XP) you might want to disable AHCI anyway, at least until you have installed the ahci driver for Windows.
Hard Drive Active Protection
The integrated harddrive active protection acceleration meter can be used as a joystick or to get information about movements of your thinkpad.
Emerge the hdapsd and app-laptop/tp_smapi with the hdaps USE-Flag enabled, which will generate a joystick and an event device.
It can be used for protecting your harddisk as well. Make sure to diable the kernel internal hdaps module, emerge hdapsd and tp_smapi with the hdaps flag enabled, rc-update add hdapsd boot and then reboot.
Heads will only be parked with this method. However, in some situations and with some disk there will be a full spindown, which should be avoided as this might damage your harddisk when used too much.
On newer versions of xorg it might be possible that the accelerometer is seen as a mouse, which makes your pointer hop to the middle of the screen all the time. In order to solve this, you can create a udev rule:
/etc/udev/rules.d/99-hdaps.rules
SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="ThinkPad HDAPS accelerometer data", ENV{x11_driver}="" SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="ThinkPad HDAPS joystick emulation", ENV{x11_driver}=""
which solves this problem.
Input
TouchPad
Works out of the box here, with scrolling.
TouchPads are, as all the other input devices, not configured via xorg.conf anymore in xorg >= 1.6. You can either use the xorg.conf.d directory, udev rules or synclient on a per user base.
I use
synclient HorizEdgeScroll=1 VertEdgeScroll=1 MinSpeed=0.25 MaxSpeed=0.42 AccelFactor=0.0010 VertTwoFingerScroll=1 HorizTwoFingerScroll=1 TapButton2=2 TapButton3=3 PalmDetect=1 PalmMinWidth=5 RTCornerButton=2 RBCornerButton=3
in my autostart, which activates two finger scrolling, multifinger tab and edge buttons.
The touchpad can be disabled via synclient when using the synaptics driver, a possible solution is this script:
<bash>
- !/bin/sh
touchpad=`synclient -l | grep TouchpadOff | awk '{print $3}'` case "$touchpad" in
1) synclient TouchpadOff=0;
echo "Touchpad Enabled" | osd_cat -d 1 -c cyan --font="-*-times-bold-r-*--34-240-*-*-p-*-*-*" -A center -p bottom ;;
0) synclient TouchpadOff=1;
echo "Touchpad Disabled" | osd_cat -d 1 -c cyan --font="-*-times-bold-r-*--34-240-*-*-p-*-*-*" -A center -p bottom
;;
esac exit 0 </bash>
which needs xosd to display the current state. You can remove the "echo" line if you don't want the status being displayed or if you don't have xosd. You can make the script executable and map it to the fn+f8 button.
Trackpoint
Works out of the box as well, with no scrolling however. Can be configured via xorg.conf, I prefer using the middle button as mouse3.
Keyboard
Works out of the box, most of the Fn Keys work.
Hardwired: Thinklight, Brightness
Generates a keycode and can be configured: Volume Down, Volume Up, Fn+F2, Fn+F3, Fn+F4, Fn+F5, Fn+F7, Fn+F8, Fn+Arrows
Does not generate a key event: Fn+Space Those keys do produce an acpi event, so you can modifiy your acpi configuration to bind them to commands.
It is also possible to translate the acpi events to keyevents, have a look at the following configuration file:
My example default.sh file for the missing keys is here and there is a good, more complete howto here: Gentoo Wiki
Suspend
Suspend to RAM worked out of the box here, echo 3 > /proc/acpi/sleep puts the machine in suspend mode, opening it or pressing the power button wakes it up. Worked with nvidia driver and in X11. All devices came back without problems, wlan might have disconnected, but by using networkmanager, wicd or a good configuration it should reconnect after waking up. Works here with wicd.
Suspend to Disk works out of the box as well.
Integrated Fingerprint Reader
Not tested yet
Integrated Webcam
The Camera seems to be a Chicony Electronics Co., Ltd. device, with
Vendor ID: 0x17ef Product ID: 0x480f
You have to enable: Video capture adapters ---> V4L USB devices ---> USB Video Class (UVC) in the kernel, then the camera will work out of the box (tested with Kopete)
Integrated Card reader
The card reader is a
SD Host controller: Ricoh Co Ltd Device e822 (rev 01)
You can enable the sd/sdhci drivers in the Kernel in order to get it to work.
Thinklight
The thinklight works out of the box with the Fn+PgUp key, but it can be controlled as well via the proc interface.
So you can write a nice script, which you can bind to events, such as incoming emails, to let the light flash.
A possible solution is this small script:
<bash>
- !/bin/sh
if [ -z "$1" ] then echo "IBM ThinkLight Control script." echo "2007 by Christian \"Fuchs\" Loosli." echo "" echo "usage: lightctl on | off | toggle | blink" echo "blink takes two arguments: times and time" echo "defaults (5 times, 0.5 seconds) are used if not specified"
else if [ $1 = "on" ] then
echo on > /proc/acpi/ibm/light
fi if [ $1 = "off" ] then
echo off > /proc/acpi/ibm/light
fi
if [ $1 = "toggle" ]
then status=`cat /proc/acpi/ibm/light | grep status | awk '{print $2}'`
if [ $status = "on" ] then echo off > /proc/acpi/ibm/light else echo on > /proc/acpi/ibm/light fi fi
if [ $1 = "blink" ] then
times=$2 time=$3
if [ -z "$2" ] then times=4 fi
if [ -z "$3" ] then time=0.5 fi
for i in `seq 1 $times`; do $0 toggle; sleep $time; $0 toggle; sleep $time done
fi fi exit 0
</bash> which can be called to let the light blink or switch it off or on. The blink part is nice for setting to events such as incoming messages or emails.
(note: the thinklight is a LED, so it should not care on how fast and often you let it blink. But I am not responsible if this script damages your thinklight. Use at own risk.
Power saving
First of all, turn off all things you are not using, most of all bluetooth and W-LAN. You can use the killswitch on the front, it works out of the box.
You can use the application powertop by Intel to look for processes which prevent the CPU from longer sleep states.
It also gives you some recommendations on services to turn off. Do _not_ turn off the optical drive polling by HAL.
Dimming the display also saves lots of power.
You can achieve about 4 - 6 hours of working time (no compiling or other heavy CPU / GPU usage applications) with the standard battery like this.
ibm-acpi
I have ibm-acpi configured as a module in my kernel, as I load it with
options thinkpad_acpi brightness_enable=1 fan_control=1
to enable brightness controll via /proc/acpi/ibm on newer kernels and fan control. The hotkey=enable,<mask> option is used instead of writing to /proc/acpi/ibm/hotkey.
The default file permissions in /proc/acpi/ibm/* do not grant write access for users. I created the group "ibm", added my users to it and now I chown root:ibm and chmod 0774 the files in /proc/acpi/ibm/ on startup. If you don't want to do this you might use sudo sh -c "echo "foo" > /proc/acpi/ibm/whatever", but you need to install sudo and modify your sudoers file.
Configuration Files
xorg.conf
## ## Server layout for the built in monitor, an external mouse and the touchpad ## Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 EndSection ## ## Server Flags ## Section "ServerFlags" EndSection ## ## FontPath for the x font server xfs ## Section "Files" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" EndSection ## ## Module Section, load default modues ## Section "Module" Load "dbe" Load "extmod" Load "glx" Load "freetype" Load "type1" EndSection ## ## Built in Monitor ## Section "Monitor" Identifier "Monitor0" VendorName "Lenovo" ModelName "LEN" EndSection ## ## Videocard section. Some of the following options are now default ## and only kept for compatibility reasons with older drivers ## Read the Appendix B of the nvidia README for explanations ## Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 3100M" # power savings Option "OnDemandVBlankInterrupts" "true" # allow underclocking Option "Coolbits" "1" # enable the X Resize and Rotation extension Option "RandRRotation" "true" # backlight fix Option "RegistryDwords" "EnableBrightnessControl=1" EndSection ## ## Screen Section ## Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1440x900" "1024x768" "800x600" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1440x900" "1024x768" "800x600" EndSubSection SubSection "Display" Viewport 0 0 Depth 8 Modes "1440x900" "1024x768" "800x600" EndSubSection EndSection ## ## Extensions, load compisite for compiz ## Section "Extensions" Option "Composite" "Enable" EndSection
xmodmap
Note: you have to xmodmap /path/to/file this file in your autostart. You might have different keycodes, use the application xev to display them. It is highly recommended to use the XF86foobar buttons, as some applications will be preconfigured to them. If you want to map them by yourself use Fxx, while xx > 12.
!arrow keys keycode 167 = XF86Forward keycode 166 = XF86Back !Fn+Fx keycode 160 = F22 keycode 244 = F23 keycode 150 = F24 keycode 235 = F27 keycode 200 = F28 keycode 213 = F29 !Brightnes keycode 101 = SunVideoRaiseBrightness keycode 212 = SunVideoLowerBrightness !Media keycode 173 = XF86AudioPrev keycode 172 = XF86AudioPlay keycode 171 = XF86AudioNext keycode 174 = XF86AudioStop !Volume keycode 121 = XF86AudioMute keycode 122 = XF86AudioLowerVolume keycode 123 = XF86AudioRaiseVolume
Kernel configuration
Kernel 2.6.36
Links
* HowTo -- Install Gentoo on Thinkpad T410 (german)