Difference between revisions of "Installing SuSE 10.0 on Thinkpad T40p"

From ThinkWiki
Jump to: navigation, search
m (Introduction)
m (The beginning)
Line 15: Line 15:
 
I'm trying to make a machine with good performance and power consumption; luckily, with Pentium-M we can get both. The machine would have both Windows and Linux on it.
 
I'm trying to make a machine with good performance and power consumption; luckily, with Pentium-M we can get both. The machine would have both Windows and Linux on it.
  
==The beginning==
+
==First steps==
 
+
===Hardware setup===
The original 40Gb drive was replaced with 100Gb
+
The original 40Gb drive was replaced with 100Gb. I didn't care much about recovery partition - with recently introduced [http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4ZKMCT Software Installer] IBM-specific Windows drivers and tools could be installed automagcally.
  
 
==Part 2==
 
==Part 2==
 
==Part 3==
 
==Part 3==

Revision as of 01:40, 17 February 2006

ATTENTION!
This is work in progress. Do not consider it as a guide - in fact, it really is a page draft filled with notes from running project

Introduction

For many years, I was pretty happy with my 600E; it is a excellent laptop, which performs very well running MS Windows OS as well as any UNIX-like I put on it (there were three FreeBSD versions and several Linuxes). However, during my recent trip to Florida I discovered that this platform is not good for long travel:

  • it doesn't play DVDs very well
  • it eats batteries - two hours is not enough for the four-hour flight from Denver to Ft.Lauderdale
  • modern image editing applications such as Canon Digital Photo Professional take too long to execute

Immediately after returning home I started looking around and after careful considerations bought this T40p. There is not much difference between machines in T40-T42 range, especially if you are good with screwdriver; however, T40s are substantially cheaper on eBay.

I'm trying to make a machine with good performance and power consumption; luckily, with Pentium-M we can get both. The machine would have both Windows and Linux on it.

First steps

Hardware setup

The original 40Gb drive was replaced with 100Gb. I didn't care much about recovery partition - with recently introduced Software Installer IBM-specific Windows drivers and tools could be installed automagcally.

Part 2

Part 3