Difference between revisions of "Installing Gentoo 2007.0 on a ThinkPad R61"

From ThinkWiki
Jump to: navigation, search
m (Integrated Fingerprint Reader)
(lots of updates: X11, nvidia driver, synaptics, ...)
 
(79 intermediate revisions by 5 users not shown)
Line 6: Line 6:
 
Please read the gentoo handbook for installation instructions
 
Please read the gentoo handbook for installation instructions
  
Working:  
+
====Working:====
  
- Keyboard, UltraNav input  
+
* Keyboard, UltraNav input (Touchpad and NavPoint)
 +
* Drives
 +
* X11 with nVidia including acceleration
 +
* Network, wireless network and bluetooth
 +
* Sound
 +
* Suspend to RAM
 +
* Suspend to Disk (Hibernate)
 +
* ThinkLight
 +
* PCMCIA
 +
* ACPI (Battery, CPU Frequency, Fan, Temperature, ...)
 +
* Fingerprint scanner (includes login and screen lock)
 +
* Fn Key combinations
 +
* Hot swapping of optical drive (UltraBay)
 +
* HDD Acceleration Meter (can be used as an input device) 
 +
* Harddisk protection (kernel patched with [http://www.fuchsnet.ch/files/hdaps-2.6.24.patch this])
  
- Drives
+
====Not tested:====
  
- X11 with nVidia including acceleration
+
* Firewire (should work as it is recognized, no devices for testing)
 +
* Express Card Slot (should work, no devices for testing)
 +
* Docking Station (should work according to several sources, no devices for testing)
  
- Network, wireless network and bluetooth
+
== Graphics: NVIDIA Quadro NVS 140M ==
  
- Sound
+
To install and configure the nVidia driver, just emerge nvidia-driver.
 +
Tested with nvidia-driver-100.14.19 up to 169.12, everything works fine, games run smooth.
  
- Suspend to RAM
+
Framebuffer works fine with vga=869 which will set the resolution to 1440x900.
 +
hwinfo --framebuffer  displays all supported resolutions. 
  
- ThinkLight
+
The brightness can be changed with newer nvidia drivers (>=169.04)
 +
Does not work with older drivers, only known workaround
 +
is to either use vesa / nv driver or to change the
 +
brightness on a vt.
  
- PCMCIA
 
  
- ACPI (Battery, CPU Frequency, Fan, Temperature, ...)
+
Performance of the card depends heavy on powermizer
 +
and some nvidia settings.  
  
- Fingerprint scanner (includes login and screen lock)
+
In recent nvidia drivers, powermizer can be configured via `nvidia-settings`
  
 +
<pre>
 +
#!/bin/sh
 +
if [ -z "$1" ]
 +
then
 +
        echo "Powermizer control script."
 +
        echo "2010 by Christian \"Fuchs\" Loosli."
 +
        echo ""
 +
        echo "usage: powermizer on | off"
  
 +
else
 +
        if [ $1 = "on" ]
 +
        then
 +
                nvidia-settings -a [gpu:0]/GPUPowerMizerMode=0
 +
        fi
 +
        if [ $1 = "off" ]
 +
        then
 +
                nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
 +
        fi
 +
fi
 +
exit 0
 +
</pre>
  
Partially working:
+
This script turns powermizer on or off. You can use it together with acpi events or your power management to turn powermizer off as soon as your notebook is powered via AC.  
 
 
- Fn Keys
 
 
 
 
 
 
 
Not tested:
 
 
 
- Firewire (should work as it is recognized, no devices for testing)
 
 
 
- Express Card Slot
 
 
 
- Harddisk protection (should work with patching)
 
 
 
- Docking Station (should work according to several sources)
 
 
 
== Graphics: NVIDIA Quadro NVS 140M ==
 
 
 
To install and configure the nVidia driver, just emerge nvidia-driver.
 
Tested with nvidia-driver-100.14.19, everything works fine, games run smooth.
 
 
 
Framebuffer works fine with vga=791, might work on higher resolutions as well,
 
hwinfo --framebufer  displays the supported resolutions. 
 
 
 
{{NOTE|The brightness cannot be changed while X is displayed. Press Ctrl-Alt-F1 to switch to the first virtual console. There, change the brightness by pressing Fn-Pos1 or Fn-End. Then, press Ctrl-Alt-F7 to return to X.}}
 
  
 
== Sound: AD1984 ==
 
== Sound: AD1984 ==
Line 61: Line 78:
  
 
The mute button is hardwired and works, the volume up and volume down buttons  
 
The mute button is hardwired and works, the volume up and volume down buttons  
work as well but you need to configure them first.  
+
work as well but you need to configure them first. You can use xmodmap to bind a key to them and then either bind a amixer command to them, or set them as hotkeys in your mixer application (kmix, gnome-mixer, ...)
 +
Please note that some mixer applications take the wrong mixer (the microphone) as the default, so you have to change the default / primary mixer in order to use things like kmilo.  
  
 
Note: After muting you have to press a volume up or down button to unmute,  
 
Note: After muting you have to press a volume up or down button to unmute,  
and the mute status is not displayed in any mixer application.  
+
and the mute status is not displayed in any mixer application.
 +
 
 +
 
 +
'''Note for Kernel 2.6.24:'''
 +
Due to changes in thinkpad acpi the mute button does not longer work out of the box,
 +
but it does generate a key event. So you have to bind it to a script which mutes
 +
the headphone and speaker via amixer toggle <mixer>.
 +
This is a known problem to the thinkpad-acpi developers and probably will
 +
be resolved in the near future.
 +
 
 +
I recommend using alsa-drivers 1.0.16, as there is a new master mixer,
 +
which has mute capabilities to mute headphones and speaker.
 +
So you can either bind the key in a mixer application or you only have
 +
to use one amixer command.
  
 
== Network: Intel E1000 NIC, IPW4965abgn WNIC, Bluetooth==  
 
== Network: Intel E1000 NIC, IPW4965abgn WNIC, Bluetooth==  
Line 77: Line 108:
  
 
Bluetooth works out of the box with blueZ.
 
Bluetooth works out of the box with blueZ.
 +
You can disable / enable bluetooth via proc,
 +
with a script similar to this one:
 +
 +
<bash>
 +
#!/bin/sh
 +
bluetooth=`head -n 1 /proc/acpi/ibm/bluetooth | awk '{print $2}'`
 +
case "$bluetooth" in
 +
    disabled)
 +
        echo "enable" > /proc/acpi/ibm/bluetooth
 +
;;
 +
    enabled)
 +
        echo "disable" > /proc/acpi/ibm/bluetooth
 +
        ;;
 +
esac
 +
exit 0
 +
</bash>
 +
 +
or directly with the proc interface. This script helps you
 +
to bind it to the Fn+F5 key combination.
 +
 +
Note that the hardware killswitch on the front works as well,
 +
but disables both bluetooth and WLAN
 +
 +
If you desperately want the wireless LED to work you can use
 +
[http://bughost.org/bugzilla/attachment.cgi?id=1263 this] patch for a 2.6.24 kernel.
 +
Make sure to enable LED Triggers and LED groups in your kernel configuration,
 +
then there is a new option in the iwlwifi submenu. Works here, however,
 +
it doesn't blink on activity as it would with windows.
  
 
== Ports: PCMCIA, USB, IEEE 1394 Firewire ==  
 
== Ports: PCMCIA, USB, IEEE 1394 Firewire ==  
Line 85: Line 144:
 
The left hand usb ports generate an IRQ nobody cared error from time to time,  
 
The left hand usb ports generate an IRQ nobody cared error from time to time,  
 
Try to boot with irqpoll in your kernel line as suggested.  
 
Try to boot with irqpoll in your kernel line as suggested.  
 +
 +
A BIOS Update might help as well, it is recommended to use the
 +
ThinkVantage Software Updater for windows for a BIOS Update.
 +
The error disappeared here and USB works fine.
  
 
Firewire is untested but should work, as the port is  
 
Firewire is untested but should work, as the port is  
Line 92: Line 155:
  
 
The optical drive and hard drive work out of the box,  
 
The optical drive and hard drive work out of the box,  
at least with AHCI disabled in the BIOS.  
+
with AHCI disabled or enabled in the BIOS.  
  
If you run a dualboot system with windows <= 5.1 (XP) you want to disable AHCI anyway.
+
If you run a dualboot system with windows <= 5.1 (XP) you probably want to disable AHCI anyway,
 +
at least until you have installed the ahci driver for Windows.
  
 
== Input ==
 
== Input ==
Line 100: Line 164:
 
=== TouchPad ===
 
=== TouchPad ===
 
Works out of the box here, with scrolling.  
 
Works out of the box here, with scrolling.  
Have a look at my Xorg.conf section at the end
+
 
 +
TouchPads are, as all the other input devices, not configured via xorg.conf anymore in xorg >= 1.6.
 +
You can either use hal policy files (deprecated as well), udev rules or synclient on a per user base.
 +
 
 +
I use
 +
 
 +
<pre>
 +
synclient HorizEdgeScroll=1 VertEdgeScroll=1 MinSpeed=0.25 MaxSpeed=0.42 AccelFactor=0.0010 VertTwoFingerScroll=1 HorizTwoFingerScroll=1 TapButton2=2 TapButton3=3 PalmDetect=1 PalmMinWidth=5 RTCornerButton=2 RBCornerButton=3
 +
</pre>
 +
 
 +
in my autostart, which activates two finger scrolling, multifinger tab and edge buttons.  
 +
 
 +
The touchpad can be disabled via synclient when using the synaptics driver,
 +
a possible solution is this script:
 +
 
 +
<bash>
 +
#!/bin/sh
 +
touchpad=`synclient -l | grep TouchpadOff | awk '{print $3}'`
 +
case "$touchpad" in
 +
    1)
 +
        synclient TouchpadOff=0;
 +
echo "Touchpad Enabled" | osd_cat -d 1 -c cyan --font="-*-times-bold-r-*--34-240-*-*-p-*-*-*" -A center -p bottom
 +
;;
 +
    0)
 +
        synclient TouchpadOff=1;
 +
echo "Touchpad Disabled" | osd_cat -d 1 -c cyan --font="-*-times-bold-r-*--34-240-*-*-p-*-*-*" -A center -p bottom
 +
    ;;
 +
esac
 +
exit 0
 +
</bash>
 +
 
 +
which needs xosd to display the current state. You can remove the "echo" line if you don't want the status being displayed or if you don't have xosd.
 +
You can make the script executable and map it to the fn+f8 button.
 +
 
 +
 
  
 
=== Trackpoint ===
 
=== Trackpoint ===
Line 111: Line 209:
 
Hardwired:  Mute, Thinklight, Brightness  
 
Hardwired:  Mute, Thinklight, Brightness  
  
Generates a keycode and can be configured: Volume Down, Volume Up, Fn+F2, Fn+F3, Fn+F4, Fn+F5, Fn+F7, Fn+Arrows
+
Generates a keycode and can be configured: Volume Down, Volume Up, Fn+F2, Fn+F3, Fn+F4, Fn+F5, Fn+F7, Fn+F8, Fn+Arrows
 +
 
 +
Does not generate a key event: Fn+F9, Fn+F12, Fn+Space
 +
Those keys do produce an acpi event, so you can modifiy your
 +
acpi configuration to bind them to commands.
 +
 
 +
It is also possible to translate the acpi events to keyevents, have a look at the following configuration file:
  
Does not generate a key event: Fn+F8, Fn+F9, Fn+F12, Fn+Space
+
[[Installing_Gentoo_2007.0_on_a_ThinkPad_R61#default.sh_.28acpid.29|My example default.sh file for the missing keys is here]]
 +
and there is a good, more complete howto
 +
here: [http://gentoo-wiki.com/HARDWARE_Lenovo_Thinkpad_T61#Usage_of_acpid Gentoo Wiki]
  
== Power Management ==
+
Try whether  echo "0xffffffff" > /proc/acpi/ibm/hotkey
 +
enables additional fn+fx keys to produce a key event
 +
instead of only an acpi event.
 +
Take a look at the ibm-acpi section as well to do this on module load.
 +
 
 +
== Suspend ==
 
Suspend to RAM worked out of the box here, echo 3 > /proc/acpi/sleep  
 
Suspend to RAM worked out of the box here, echo 3 > /proc/acpi/sleep  
 
puts the machine in suspend mode, opening it or pressing the power button wakes it up.  
 
puts the machine in suspend mode, opening it or pressing the power button wakes it up.  
Line 121: Line 232:
 
wlan might have disconnected, but by using networkmanager, wicd or a good configuration
 
wlan might have disconnected, but by using networkmanager, wicd or a good configuration
 
it should reconnect after waking up. Works here with wicd.  
 
it should reconnect after waking up. Works here with wicd.  
 +
 +
Suspend to Disk is more complicated.
 +
Emerge a tux on ice kernel and try the configuration file
 +
linked at the end of this page. Disable intel-agp in the kernel.
 +
Make sure to load the nvidia module with NVreg_NvAGP=1 option.
 +
 +
This is my /etc/hibernate/common.conf  file.
 +
Note that all options not mentioned here are commented (#)
 +
 +
<pre>
 +
 +
Verbosity 0
 +
LogFile /var/log/hibernate.log
 +
LogVerbosity 3
 +
HibernateVT 11
 +
Distribution gentoo
 +
# XDisplay :0
 +
 +
### clock
 +
SaveClock restore-only
 +
 +
### hardware_tweaks
 +
IbmAcpi yes
 +
FullSpeedCPU yes
 +
 +
### modules
 +
# UnloadBlacklistedModules yes
 +
LoadModules auto
 +
 +
### xhacks
 +
SwitchToTextMode yes
 +
UseDummyXServer yes
 +
# DummyXServerConfig xorg-dummy.conf
 +
 +
</pre>
 +
 +
Note that the extra_pages_allowance might be too low.
 +
In current TuxOnIce versions the option to raise this value
 +
did not work anymore, that's why I put
 +
 +
echo 1000 > /sys/power/tuxonice/extra_pages_allowance
 +
 +
in my local.startup.
 +
 +
You can get the correct value by trying to suspend
 +
without it and reading /var/log/hibernate.log afterwards.
 +
 +
The machine can now be suspended to disk with the hibernate command.
  
 
== Integrated Fingerprint Reader ==
 
== Integrated Fingerprint Reader ==
Line 135: Line 294:
 
Note: kdm has problems with thinkfinger auth and might crash.  
 
Note: kdm has problems with thinkfinger auth and might crash.  
 
There are patches, but I didn't test them yet. gdm works fine here.
 
There are patches, but I didn't test them yet. gdm works fine here.
 +
 +
 +
== Hard Drive Active Protection ==
 +
 +
The integrated harddrive active protection
 +
acceleration meter can be used as a joystick or
 +
to get information about movements of your thinkpad.
 +
 +
Emerge the hdapsd (which includes a kernel module
 +
you have to load) which will generate a joystick
 +
and an event device.
 +
 +
It can be used for protecting your harddisk as well.
 +
You first need to patch your kernel with [http://www.fuchsnet.ch/files/hdaps-2.6.24.patch this patch] and then rebuild it. Make sure to diable the kernel internal hdaps module, emerge hdapsd and tp_smapi with the hdaps flag enabled, rc-update add hdapsd boot and then reboot.
 +
 +
When shaking your notebook you should receive a message via dmesg that the hdd head has been parked.
 +
You can also use a frontend like khdaps.
 +
 +
Heads will only be parked with this method. However, in some situations and with some disk there will be a full spindown, which should be avoided as this might damage your harddisk when used too much.
 +
 +
On newer versions of xorg it might be possible that the accelerometer is seen as a mouse, which makes your pointer hop to the middle of the screen all the time. In order to solve this, you can create a udev rule:
 +
 +
/etc/udev/rules.d/99-hdaps.rules
 +
<pre>
 +
SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="ThinkPad HDAPS accelerometer data", ENV{x11_driver}=""
 +
SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="ThinkPad HDAPS joystick emulation", ENV{x11_driver}=""
 +
</pre>
 +
 +
which solves this problem.
 +
 +
== Thinklight ==
 +
 +
The thinklight works out of the box with the
 +
Fn+PgUp key, but it can be controlled as well via the proc interface.
 +
 +
So you can write a nice script, which you can bind to events,
 +
such as incoming emails, to let the light flash.
 +
 +
A possible solution is this small script:
 +
 +
<bash>
 +
#!/bin/sh
 +
 +
if [ -z "$1" ]
 +
then
 +
echo "IBM ThinkLight Control script."
 +
echo "2007 by Christian \"Fuchs\" Loosli."
 +
echo ""
 +
echo "usage: lightctl on | off | toggle | blink"
 +
echo "blink takes two arguments: times and time"
 +
echo "defaults (5 times, 0.5 seconds) are used if not specified"
 +
 +
else
 +
if [ $1 = "on" ]
 +
then
 +
          echo on > /proc/acpi/ibm/light
 +
fi
 +
if [ $1 = "off" ]
 +
then
 +
        echo off > /proc/acpi/ibm/light
 +
fi
 +
 +
        if [ $1 = "toggle" ]
 +
then
 +
status=`cat /proc/acpi/ibm/light | grep status | awk '{print $2}'`
 +
 +
if [ $status = "on" ]
 +
then
 +
echo off > /proc/acpi/ibm/light
 +
else
 +
echo on > /proc/acpi/ibm/light
 +
fi
 +
fi
 +
 +
if [ $1 = "blink" ]
 +
then
 +
 +
times=$2
 +
time=$3
 +
 +
if [ -z "$2" ]
 +
then
 +
times=4
 +
fi
 +
 +
if [ -z "$3" ]
 +
then
 +
time=0.5
 +
fi
 +
 +
            for i in `seq 1 $times`;
 +
            do
 +
            $0 toggle;
 +
                        sleep $time;
 +
                        $0 toggle;
 +
                        sleep $time
 +
            done   
 +
fi
 +
fi
 +
exit 0
 +
 +
</bash>
 +
which can be called to let the light blink or switch it off or on.
 +
The blink part is nice for setting to events such as incoming
 +
messages or emails.
 +
 +
There is a version slightly modified by a friend of mine
 +
[http://www.fuchsnet.ch/files/thinklight.sh here] which has a lockfile and is slightly optimized.
 +
 +
(note: the thinklight is a LED, so it should not care on
 +
how fast and often you let it blink. But I am not responsible
 +
if this script damages your thinklight. Use at own risk.
 +
 +
== Power saving ==
 +
 +
First of all, turn off all things you are not using,
 +
most of all bluetooth and W-LAN.
 +
You can use the killswitch on the front, it works out of the box.
 +
 +
You can use the application [http://www.lesswatts.org/projects/powertop/ powertop]
 +
by Intel to look for processes which prevent the CPU from longer sleep states.
 +
 +
It also gives you some recommendations on services to turn off. Do _not_ turn off the optical drive polling by HAL.
 +
 +
Dimming the display also saves lots of power.
 +
 +
 +
Since 2.6.24 [[dynticks]] are available for x86_64.
 +
 +
I managed to get powerconsumption down to:
 +
 +
* 20W running normal with compiz, wlan & bluetooth enabled
 +
 +
* 16.7W running a normal windowmanager
 +
 +
* 14.5W with bluetooth and wlan disabled (killswitch)
 +
 +
I had between 195 and 600 wakeups per second.
 +
 +
Also hda-intel and s-ata power consumption was reduced in 2.6.24
 +
 +
You can achieve about 2 - 3 hours of working time
 +
(no compiling or other heavy CPU / GPU usage applications)
 +
with the standard battery like this.
 +
 +
== ibm-acpi ==
 +
 +
I have ibm-acpi configured as a module in my kernel, as I load it with
 +
 +
options thinkpad_acpi hotkey=enable,0xffffffff brightness_enable=1 fan_control=1
 +
 +
to enable brightness controll via /proc/acpi/ibm on newer kernels and fan control.
 +
The hotkey=enable,<mask> option is used instead of writing to /proc/acpi/ibm/hotkey.
 +
 +
The default file permissions in /proc/acpi/ibm/* do not grant write access for users. I created the group "ibm", added my users to it and now I chown root:ibm and chmod 0774 the files in /proc/acpi/ibm/ on startup. If you don't want to do this you might use sudo sh -c "echo "foo" > /proc/acpi/ibm/whatever", but you need to install sudo and modify your sudoers file.
  
 
== Configuration Files ==
 
== Configuration Files ==
Line 141: Line 455:
 
Note that I use the XFont Server, you might have  
 
Note that I use the XFont Server, you might have  
 
to change the font path.  
 
to change the font path.  
 +
 +
You also might want to change the keyboard layout.
 +
 +
'
 +
Note: in this configuration here nvidia wont read out
 +
sane refresh and sync values out of your flat panel.
 +
 +
In this configuration the modes given don't affect
 +
the modes available and you will have all screen resolutions available,
 +
but it might fail on other display devices.
 +
 +
If you get a blank screen or strange refresh values, add # in front of the marked line to disable
 +
this behaviour, so the nvidia driver will still read out sane resolutions.
  
 
<pre>
 
<pre>
  
 +
##
 +
## Server layout for the built in monitor, an external mouse and the touchpad
 +
##
 
Section "ServerLayout"
 
Section "ServerLayout"
Identifier    "single head configuration"
+
    Identifier    "single head configuration"
Screen         0 "Screen0" 0 0
+
    Screen     0 "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
 
InputDevice    "Mouse0" "CorePointer"
 
        inputDevice    "Touchpad" "SendCoreEvents"
 
 
EndSection
 
EndSection
  
Section "Files"
+
##
FontPath    "unix/:-1"
+
##  Server Flags  (Don't zap false allows you to re-active CTRL+ALT+Backspace via xset)
EndSection
+
##             
 +
Section "ServerFlags"
 +
    Option "DontZap" "false"
 +
EndSection                 
 +
 
 +
##
 +
## FontPath for the x font server xfs
 +
##                                 
 +
Section "Files"                     
 +
    FontPath    "/usr/share/fonts/local"
 +
    FontPath    "/usr/share/fonts/misc"  
 +
    FontPath   "/usr/share/fonts/Type1"
 +
     FontPath    "/usr/share/fonts/TTF" 
 +
    FontPath    "/usr/share/fonts/75dpi"
 +
    FontPath    "/usr/share/fonts/100dpi"
 +
EndSection    
  
 +
##
 +
## Module Section, load default modues
 +
##
 
Section "Module"
 
Section "Module"
Load "dbe"
+
    Load           "dbe"
Load "extmod"
+
    Load           "extmod"
Load "fbdevhw"
+
    Load           "glx"
Load  "glx"
+
    Load           "freetype"
Load  "record"
+
    Load           "type1"
Load "freetype"
 
Load "type1"
 
 
EndSection
 
EndSection
  
Section "InputDevice"
+
 
Identifier "Keyboard0"
+
##
Driver      "kbd"
+
## Built in Monitor with power saving features enabled
Option     "XkbModel" "pc102"
+
## and manually specified frequencies as the EDID is a bit broken
Option     "XkbLayout" "ch"
+
##
 +
Section "Monitor"
 +
    Identifier     "Monitor0"
 +
    VendorName    "Lenovo"
 +
     ModelName      "LEN"
 +
    HorizSync      28.0 - 61.0
 +
    VertRefresh    43.0 - 62.0
 +
    Option         "DPMS"
 
EndSection
 
EndSection
  
Section "InputDevice"
+
##
     Identifier "Touchpad"
+
## Videocard section. Some of the following options are now default
     Driver "synaptics"
+
## and only kept for compatibility reasons with older drivers
     Option "Protocol" "auto-dev"
+
## Read the Appendix B of the nvidia README for explanations
     Option "Device" "/dev/input/mouse0"
+
##
     Option "Emulate3Buttons" "no"
+
Section "Device"
     Option "ZAxisMapping" "4 5"
+
     Identifier     "Videocard0"
     Option "LeftEdge" "1700"
+
     Driver         "nvidia"
     Option "RightEdge" "5300"
+
     VendorName    "NVIDIA Corporation"
     Option "TopEdge" "1700"
+
     BoardName      "Quadro NVS 140M"
     Option "BottomEdge" "4200"
+
 
    Option "FingerLow" "25"
+
     # bus options (disable agp and specify the bus ID (pci-e)
     Option "FingerHigh" "30"
+
     Option         "NvAGP" "0"
     Option "MaxTapTime" "180"
+
     BusID          "PCI:1:0:0"
     Option "MaxTapMove" "220"
+
      
     Option "VertScrollDelta" "100"
+
     # do not use the frequencies provided by the monitor edid
     Option "MinSpeed" "0.02"
+
     Option         "UseEdidFreqs" "false"
     Option "MaxSpeed" "0.28"
+
   
     Option "AccelFactor" "0.0010"
+
     # Allows the driver to enable VBlank interrupt generation only when it is required
     Option "SHMConfig" "on"
+
     # Saves power, as there are less wakeups
     Option "UseSHM" "true"
+
     Option         "OnDemandVBlankInterrupts" "true"
EndSection
+
      
 +
     # allow underclocking
 +
     Option         "Coolbits" "1"
 +
      
 +
     # enable the X Resize and Rotation extension
 +
     Option         "RandRRotation" "true"
  
  
Section "InputDevice"
+
    # speed up 2d by actiavting the RENDER extension (default by now) and using
Identifier  "Mouse0"
+
    # DAMAGE to only update regions of the screen which actually changed.
Driver      "mouse"
+
    # Also activating BackingStore which keeps pixel data for occluded window regions
Option     "Protocol" "ExplorerPS/2"
+
    # and activating TripleBuffer. ARGBGLXVisuals are now enabled by default
Option     "Device" "/dev/input/mice"
+
    Option        "RenderAccel" "true"
Option     "ZAxisMapping" "6 7"
+
    Option        "UseEvents" "false"
Option     "buttons" "7"
+
    Option         "TripleBuffer" "1"
Option     "Emulate3Buttons" "yes"
+
    Option         "DamageEvents" "1"
EndSection
+
    Option         "BackingStore" "1"
 +
    Option   "AllowIndirectPixmaps" "true"
 +
    Option   "AddARGBGLXVisuals" "True"
  
Section "Monitor"
+
    # If some applications (e.g. xchat) need SHM Pixmaps then remove this line
Identifier  "Monitor0"
+
    Option        "AllowSHMPixmaps" "False"
VendorName  "Monitor Vendor"
 
ModelName    "Flat Panel 1400x950"
 
Option     "DPMS"
 
 
EndSection
 
EndSection
  
Section "Device"
 
Identifier  "Videocard0"
 
Driver      "nvidia"
 
VendorName  "NVIDIA"
 
BoardName  "NVIDIA GeForce FX (generic)"
 
Option      "AllowGLXWithComposite" "true"
 
Option      "RenderAccel" "true"
 
Option     "Backingstore" "true"
 
EndSection
 
  
 +
##
 +
## Screen Section
 +
##
 
Section "Screen"
 
Section "Screen"
 
Identifier  "Screen0"
 
Identifier  "Screen0"
 
Device      "Videocard0"
 
Device      "Videocard0"
 
Monitor      "Monitor0"
 
Monitor      "Monitor0"
DefaultDepth 24
+
DefaultDepth 24
Option      "AddARGBGLXVisuals" "true"
+
Option      "AddARGBGLXVisuals" "true"
 +
Option     "UseCompositeWrapper" "true"
 
SubSection "Display"
 
SubSection "Display"
 
Viewport  0 0
 
Viewport  0 0
 
Depth    24
 
Depth    24
Modes   "1440x900" "1024x768" "800x600" "640x480"
+
Modes     "1440x900" "1024x768" "800x600"  
 
EndSubSection
 
EndSubSection
 
SubSection "Display"
 
SubSection "Display"
Viewport 0 0
+
Viewport 0 0
Depth 16
+
Depth     16
Modes "1440x900" "1024x768" "800x600" "640x480"
+
Modes   "1440x900" "1024x768" "800x600"  
 
EndSubSection
 
EndSubSection
 
        SubSection "Display"
 
        SubSection "Display"
        Viewport 0 0
+
        Viewport 0 0
Depth 8
+
Depth     8
Modes   "1440x900" "1024x768" "800x600" "640x480"
+
Modes     "1440x900" "1024x768" "800x600"  
EndSubSection
+
EndSubSection
 
EndSection
 
EndSection
  
 +
##
 +
## Extensions, load composite for compiz (should be default by now)
 +
##
 
Section "Extensions"
 
Section "Extensions"
     Option "Composite" "Enable"
+
     Option         "Composite" "Enable"
EndSection
 
 
 
Section "DRI"
 
Group        0
 
Mode        0666
 
 
EndSection
 
EndSection
  
 
</pre>
 
</pre>
 
  
 
=== xmodmap ===
 
=== xmodmap ===
Line 263: Line 609:
 
Note: you have to xmodmap /path/to/file  
 
Note: you have to xmodmap /path/to/file  
 
this file in your autostart. You might have different keycodes, use the application xev to display them.  
 
this file in your autostart. You might have different keycodes, use the application xev to display them.  
 +
It is highly recommended to use the XF86foobar buttons, as some applications will be preconfigured to them.
 +
If you want to map them by yourself use Fxx, while xx > 12.
  
 
<pre>
 
<pre>
  
# Fn + Fx Keys ,from F2 to F7
 
keycode 146 = F22
 
keycode 241 = F23
 
keycode 223 = F24
 
keycode 142 = F25
 
keycode 214 = F26
 
keycode 215 = F27
 
  
# Volume buttons
+
! additional Arrow keys
keycode 174 = F30
 
keycode 176 = F31
 
  
# Fn + Arrows
+
keycode 233 = XF86Forward
keycode 144 = F32
+
keycode 234 = XF86Back
keycode 162 = F33
 
keycode 153 = F34
 
keycode 164 = F35
 
  
 +
! Fn+arrow keys
 +
 +
keycode 144 = XF86AudioPrev
 +
keycode 162 = XF86AudioPlay
 +
keycode 153 = XF86AudioNext
 +
keycode 164 = XF86AudioStop
 +
 +
 +
! Fn+Fx keys  F2, F3, F4, F5, F7, F8, F9, F12  in this order
 +
 +
keycode 146 = XF86ScreenSaver
 +
keycode 241 = XF86Display
 +
keycode 223 = XF86Sleep
 +
keycode 243 = XF86Send
 +
keycode 214 = XF86Video
 +
keycode 196 = XF86iTouch
 +
keycode 197 = XF86Eject
 +
keycode 165 = XF86Standby
 +
 +
 +
! Space bar
 +
 +
keycode 148 = XF86ZoomIn
 +
 +
 +
! volume control (mute is hardwired)
 +
 +
keycode 174 = XF86AudioLowerVolume
 +
keycode 176 = XF86AudioRaiseVolume
  
  
 
</pre>
 
</pre>
 +
 +
=== default.sh (acpid) ===
 +
 +
This is my slightly modified default.sh file to handle ibm hotbutton events.
 +
Of course you can add the other buttons as well, however, as they produce key events there are easier ways for configuring the actions. However, an acpi solution is window manager / X independent.
 +
 +
You can read out the key events, as they might differ on your model,
 +
with the acpi_listen application.
 +
 +
<bash>
 +
#!/bin/sh
 +
# /etc/acpi/default.sh
 +
 +
set $*
 +
 +
group=${1%%/*}
 +
action=${1#*/}
 +
device=$2
 +
id=$3
 +
value=$4
 +
 +
if [ "$group" = "ibm" ]; then
 +
key="$2"\ "$3"\ "$4"
 +
fi
 +
 +
log_unhandled() {
 +
logger "ACPI event unhandled: $*"
 +
}
 +
 +
case "$group" in
 +
button)
 +
case "$action" in
 +
power)
 +
/sbin/init 0
 +
;;
 +
 +
*) log_unhandled $*
 +
                                ;;
 +
esac
 +
;;
 +
 +
ibm)
 +
case "$action" in
 +
hotkey)
 +
case "$key" in
 +
"HKEY 00000080 00001008")
 +
/usr/bin/acpi_fakekey 220
 +
;;
 +
"HKEY 00000080 00001009")
 +
/usr/bin/acpi_fakekey 221
 +
;;
 +
"HKEY 00000080 00001014")
 +
/usr/bin/acpi_fakekey 222
 +
;;
 +
*)
 +
logger "acpid: $group/$action $key is not defined"
 +
;;
 +
 +
esac
 +
;;
 +
*)
 +
                        ;;
 +
esac
 +
;;
 +
 +
*) log_unhandled $*
 +
                ;;
 +
esac
 +
</bash>
 +
 +
Note that I use acpi_fakekey to translate acpi to key events.
 +
 +
=== ACPI Fakekey ===
 +
 +
With this nice app you can translate acpi events into key codes.
 +
 +
I borrowed it from gentoos acpi-support, which borrowed it from Ubuntu people.
 +
 +
You can it out of the sunrise overlay, I recommend only getting the
 +
acpi-fakekey.c file and compile it.
 +
 +
For the lazy guys:
 +
 +
There is an explanation and the source code,
 +
which I wont copy and paste here, on this page:
 +
 +
[http://gentoo-wiki.com/HARDWARE_Asus_F3SV#ACPI_.26_Hotkeys Gentoo Wiki on Hotkeys]
 +
 +
I use this in the file above to generate keycodes for Fn+F8, Fn+F9 and Fn+Space.
 +
 +
=== Kernel configuration ===
 +
 +
[http://www.fuchsnet.ch/files/config 2.6.24 TOI Kernel config]
 +
 +
Please note: this configuration works for my setup,
 +
it might not for yours.
 +
 +
I use ext3 as my file system, make sure to compile in the support for the file system you are using, at least for the root partition.
 +
 +
I also use external ALSA drivers.
 +
But I use lots of stuff you probably will never use, such as several gamepads,
 +
acl support for ext3, some ipv4 / ipv6 filters ...
 +
You might want to remove those.
 +
 +
This is the configuration for a 2.6.24 Kernel, it differs a little bit from the configuration of earlier kernels.
 +
 +
== Unstable Kernels and updates ==
 +
 +
=== 2.6.27 ===
 +
 +
Recently, 2.6.27 gentoo hit portage.
 +
There are several imporant changes.
 +
 +
My kernel config is [http://www.fuchsnet.ch/files/tp/config-2.6.27-gentoo here], the hdaps patch is [http://www.fuchsnet.ch/files/tp/hdaps-2.6.27.patch here]. Please note that you need a recent hdpasd to work with this new version.
 +
 +
Intels Wifi module is now split up and named iwlagn and iwlcore.
 +
 +
Suspend and Hibernate work without Tux on Ice kernels. (Just be patient with hibernate, you'll get a black screen for a while before it comes back up)
 +
 +
You also need a recent nvidia driver to work with the new kernel.

Latest revision as of 13:32, 20 February 2010

Model

Lenovo Thinkpad R61 7743-Y1B

General

This installation instruction describes the steps after a Gentoo 2007.0 base installation. Please read the gentoo handbook for installation instructions

Working:

  • Keyboard, UltraNav input (Touchpad and NavPoint)
  • Drives
  • X11 with nVidia including acceleration
  • Network, wireless network and bluetooth
  • Sound
  • Suspend to RAM
  • Suspend to Disk (Hibernate)
  • ThinkLight
  • PCMCIA
  • ACPI (Battery, CPU Frequency, Fan, Temperature, ...)
  • Fingerprint scanner (includes login and screen lock)
  • Fn Key combinations
  • Hot swapping of optical drive (UltraBay)
  • HDD Acceleration Meter (can be used as an input device)
  • Harddisk protection (kernel patched with this)

Not tested:

  • Firewire (should work as it is recognized, no devices for testing)
  • Express Card Slot (should work, no devices for testing)
  • Docking Station (should work according to several sources, no devices for testing)

Graphics: NVIDIA Quadro NVS 140M

To install and configure the nVidia driver, just emerge nvidia-driver. Tested with nvidia-driver-100.14.19 up to 169.12, everything works fine, games run smooth.

Framebuffer works fine with vga=869 which will set the resolution to 1440x900. hwinfo --framebuffer displays all supported resolutions.

The brightness can be changed with newer nvidia drivers (>=169.04) Does not work with older drivers, only known workaround is to either use vesa / nv driver or to change the brightness on a vt.


Performance of the card depends heavy on powermizer and some nvidia settings.

In recent nvidia drivers, powermizer can be configured via `nvidia-settings`

#!/bin/sh
if [ -z "$1" ]
then
        echo "Powermizer control script."
        echo "2010 by Christian \"Fuchs\" Loosli."
        echo ""
        echo "usage: powermizer on | off"

else
        if [ $1 = "on" ]
        then
                nvidia-settings -a [gpu:0]/GPUPowerMizerMode=0
        fi
        if [ $1 = "off" ]
        then
                nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
        fi
fi
exit 0

This script turns powermizer on or off. You can use it together with acpi events or your power management to turn powermizer off as soon as your notebook is powered via AC.

Sound: AD1984

Did not work with older Versions of ALSA driver, works fine with ALSA 1.0.15 and should work with ALSA 1.0.14 as well. The in-kernel ALSA works since 2.6.23.

The mute button is hardwired and works, the volume up and volume down buttons work as well but you need to configure them first. You can use xmodmap to bind a key to them and then either bind a amixer command to them, or set them as hotkeys in your mixer application (kmix, gnome-mixer, ...) Please note that some mixer applications take the wrong mixer (the microphone) as the default, so you have to change the default / primary mixer in order to use things like kmilo.

Note: After muting you have to press a volume up or down button to unmute, and the mute status is not displayed in any mixer application.


Note for Kernel 2.6.24: Due to changes in thinkpad acpi the mute button does not longer work out of the box, but it does generate a key event. So you have to bind it to a script which mutes the headphone and speaker via amixer toggle <mixer>. This is a known problem to the thinkpad-acpi developers and probably will be resolved in the near future.

I recommend using alsa-drivers 1.0.16, as there is a new master mixer, which has mute capabilities to mute headphones and speaker. So you can either bind the key in a mixer application or you only have to use one amixer command.

Network: Intel E1000 NIC, IPW4965abgn WNIC, Bluetooth

The integrated e1000 LAN NIC works out of the box.

For wireless you have to unmask and emerge the iwlwifi package with the ipw4965 USEFlag enabled.

Don't forget that the interface (wlan0) has to be set as up (ifconfig wlan0 up) before scanning and associating works.

Bluetooth works out of the box with blueZ. You can disable / enable bluetooth via proc, with a script similar to this one:

<bash>

  1. !/bin/sh

bluetooth=`head -n 1 /proc/acpi/ibm/bluetooth | awk '{print $2}'` case "$bluetooth" in

   disabled)
       echo "enable" > /proc/acpi/ibm/bluetooth

;;

   enabled)
       echo "disable" > /proc/acpi/ibm/bluetooth
       ;;

esac exit 0 </bash>

or directly with the proc interface. This script helps you to bind it to the Fn+F5 key combination.

Note that the hardware killswitch on the front works as well, but disables both bluetooth and WLAN

If you desperately want the wireless LED to work you can use this patch for a 2.6.24 kernel. Make sure to enable LED Triggers and LED groups in your kernel configuration, then there is a new option in the iwlwifi submenu. Works here, however, it doesn't blink on activity as it would with windows.

Ports: PCMCIA, USB, IEEE 1394 Firewire

PCMCIA port works out of the box, tested with an audigy pcmcia. I have no express slot cards available for testing.

The left hand usb ports generate an IRQ nobody cared error from time to time, Try to boot with irqpoll in your kernel line as suggested.

A BIOS Update might help as well, it is recommended to use the ThinkVantage Software Updater for windows for a BIOS Update. The error disappeared here and USB works fine.

Firewire is untested but should work, as the port is recognized and the module loaded.

Drives

The optical drive and hard drive work out of the box, with AHCI disabled or enabled in the BIOS.

If you run a dualboot system with windows <= 5.1 (XP) you probably want to disable AHCI anyway, at least until you have installed the ahci driver for Windows.

Input

TouchPad

Works out of the box here, with scrolling.

TouchPads are, as all the other input devices, not configured via xorg.conf anymore in xorg >= 1.6. You can either use hal policy files (deprecated as well), udev rules or synclient on a per user base.

I use

synclient HorizEdgeScroll=1 VertEdgeScroll=1 MinSpeed=0.25 MaxSpeed=0.42 AccelFactor=0.0010 VertTwoFingerScroll=1 HorizTwoFingerScroll=1 TapButton2=2 TapButton3=3 PalmDetect=1 PalmMinWidth=5 RTCornerButton=2 RBCornerButton=3

in my autostart, which activates two finger scrolling, multifinger tab and edge buttons.

The touchpad can be disabled via synclient when using the synaptics driver, a possible solution is this script:

<bash>

  1. !/bin/sh

touchpad=`synclient -l | grep TouchpadOff | awk '{print $3}'` case "$touchpad" in

   1)
       synclient TouchpadOff=0;

echo "Touchpad Enabled" | osd_cat -d 1 -c cyan --font="-*-times-bold-r-*--34-240-*-*-p-*-*-*" -A center -p bottom ;;

   0)
       synclient TouchpadOff=1;

echo "Touchpad Disabled" | osd_cat -d 1 -c cyan --font="-*-times-bold-r-*--34-240-*-*-p-*-*-*" -A center -p bottom

   ;;

esac exit 0 </bash>

which needs xosd to display the current state. You can remove the "echo" line if you don't want the status being displayed or if you don't have xosd. You can make the script executable and map it to the fn+f8 button.


Trackpoint

Works out of the box as well, with no scrolling however. Can be configured via xorg.conf, I prefer using the middle button as mouse3.

Keyboard

Works out of the box, most of the Fn Keys work.

Hardwired: Mute, Thinklight, Brightness

Generates a keycode and can be configured: Volume Down, Volume Up, Fn+F2, Fn+F3, Fn+F4, Fn+F5, Fn+F7, Fn+F8, Fn+Arrows

Does not generate a key event: Fn+F9, Fn+F12, Fn+Space Those keys do produce an acpi event, so you can modifiy your acpi configuration to bind them to commands.

It is also possible to translate the acpi events to keyevents, have a look at the following configuration file:

My example default.sh file for the missing keys is here and there is a good, more complete howto here: Gentoo Wiki

Try whether echo "0xffffffff" > /proc/acpi/ibm/hotkey enables additional fn+fx keys to produce a key event instead of only an acpi event. Take a look at the ibm-acpi section as well to do this on module load.

Suspend

Suspend to RAM worked out of the box here, echo 3 > /proc/acpi/sleep puts the machine in suspend mode, opening it or pressing the power button wakes it up. Worked with nvidia driver and in X11. All devices came back without problems, wlan might have disconnected, but by using networkmanager, wicd or a good configuration it should reconnect after waking up. Works here with wicd.

Suspend to Disk is more complicated. Emerge a tux on ice kernel and try the configuration file linked at the end of this page. Disable intel-agp in the kernel. Make sure to load the nvidia module with NVreg_NvAGP=1 option.

This is my /etc/hibernate/common.conf file. Note that all options not mentioned here are commented (#)


Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 3
HibernateVT 11
Distribution gentoo
# XDisplay :0

### clock
SaveClock restore-only

### hardware_tweaks
IbmAcpi yes
FullSpeedCPU yes

### modules
# UnloadBlacklistedModules yes
LoadModules auto

### xhacks
SwitchToTextMode yes
UseDummyXServer yes
# DummyXServerConfig xorg-dummy.conf

Note that the extra_pages_allowance might be too low. In current TuxOnIce versions the option to raise this value did not work anymore, that's why I put

echo 1000 > /sys/power/tuxonice/extra_pages_allowance

in my local.startup.

You can get the correct value by trying to suspend without it and reading /var/log/hibernate.log afterwards.

The machine can now be suspended to disk with the hibernate command.

Integrated Fingerprint Reader

Emerge the thinkfinger package, add a user with the tf-tool. Then you have to edit the /etc/pam.d/system-auth file by adding

auth sufficient pam_thinkfinger.so

between pam.unix and pam.env.

Read the Gentoo-Wiki to use it with xscreensaver, there is a good solution over there

Note: kdm has problems with thinkfinger auth and might crash. There are patches, but I didn't test them yet. gdm works fine here.


Hard Drive Active Protection

The integrated harddrive active protection acceleration meter can be used as a joystick or to get information about movements of your thinkpad.

Emerge the hdapsd (which includes a kernel module you have to load) which will generate a joystick and an event device.

It can be used for protecting your harddisk as well. You first need to patch your kernel with this patch and then rebuild it. Make sure to diable the kernel internal hdaps module, emerge hdapsd and tp_smapi with the hdaps flag enabled, rc-update add hdapsd boot and then reboot.

When shaking your notebook you should receive a message via dmesg that the hdd head has been parked. You can also use a frontend like khdaps.

Heads will only be parked with this method. However, in some situations and with some disk there will be a full spindown, which should be avoided as this might damage your harddisk when used too much.

On newer versions of xorg it might be possible that the accelerometer is seen as a mouse, which makes your pointer hop to the middle of the screen all the time. In order to solve this, you can create a udev rule:

/etc/udev/rules.d/99-hdaps.rules

SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="ThinkPad HDAPS accelerometer data", ENV{x11_driver}=""
SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="ThinkPad HDAPS joystick emulation", ENV{x11_driver}=""

which solves this problem.

Thinklight

The thinklight works out of the box with the Fn+PgUp key, but it can be controlled as well via the proc interface.

So you can write a nice script, which you can bind to events, such as incoming emails, to let the light flash.

A possible solution is this small script:

<bash>

  1. !/bin/sh

if [ -z "$1" ] then echo "IBM ThinkLight Control script." echo "2007 by Christian \"Fuchs\" Loosli." echo "" echo "usage: lightctl on | off | toggle | blink" echo "blink takes two arguments: times and time" echo "defaults (5 times, 0.5 seconds) are used if not specified"

else if [ $1 = "on" ] then

   	       echo on > /proc/acpi/ibm/light

fi if [ $1 = "off" ] then

  	       echo off > /proc/acpi/ibm/light

fi

       if [ $1 = "toggle" ]

then status=`cat /proc/acpi/ibm/light | grep status | awk '{print $2}'`

if [ $status = "on" ] then echo off > /proc/acpi/ibm/light else echo on > /proc/acpi/ibm/light fi fi

if [ $1 = "blink" ] then

times=$2 time=$3

if [ -z "$2" ] then times=4 fi

if [ -z "$3" ] then time=0.5 fi

   	        for i in `seq 1 $times`;
   	        do
   		        $0 toggle;
                       sleep $time;
                       $0 toggle;
                       sleep $time
   	        done    

fi fi exit 0

</bash> which can be called to let the light blink or switch it off or on. The blink part is nice for setting to events such as incoming messages or emails.

There is a version slightly modified by a friend of mine here which has a lockfile and is slightly optimized.

(note: the thinklight is a LED, so it should not care on how fast and often you let it blink. But I am not responsible if this script damages your thinklight. Use at own risk.

Power saving

First of all, turn off all things you are not using, most of all bluetooth and W-LAN. You can use the killswitch on the front, it works out of the box.

You can use the application powertop by Intel to look for processes which prevent the CPU from longer sleep states.

It also gives you some recommendations on services to turn off. Do _not_ turn off the optical drive polling by HAL.

Dimming the display also saves lots of power.


Since 2.6.24 dynticks are available for x86_64.

I managed to get powerconsumption down to:

  • 20W running normal with compiz, wlan & bluetooth enabled
  • 16.7W running a normal windowmanager
  • 14.5W with bluetooth and wlan disabled (killswitch)

I had between 195 and 600 wakeups per second.

Also hda-intel and s-ata power consumption was reduced in 2.6.24

You can achieve about 2 - 3 hours of working time (no compiling or other heavy CPU / GPU usage applications) with the standard battery like this.

ibm-acpi

I have ibm-acpi configured as a module in my kernel, as I load it with

options thinkpad_acpi hotkey=enable,0xffffffff brightness_enable=1 fan_control=1

to enable brightness controll via /proc/acpi/ibm on newer kernels and fan control. The hotkey=enable,<mask> option is used instead of writing to /proc/acpi/ibm/hotkey.

The default file permissions in /proc/acpi/ibm/* do not grant write access for users. I created the group "ibm", added my users to it and now I chown root:ibm and chmod 0774 the files in /proc/acpi/ibm/ on startup. If you don't want to do this you might use sudo sh -c "echo "foo" > /proc/acpi/ibm/whatever", but you need to install sudo and modify your sudoers file.

Configuration Files

xorg.conf

Note that I use the XFont Server, you might have to change the font path.

You also might want to change the keyboard layout.

' Note: in this configuration here nvidia wont read out sane refresh and sync values out of your flat panel.

In this configuration the modes given don't affect the modes available and you will have all screen resolutions available, but it might fail on other display devices.

If you get a blank screen or strange refresh values, add # in front of the marked line to disable this behaviour, so the nvidia driver will still read out sane resolutions.


##
## Server layout for the built in monitor, an external mouse and the touchpad
##
Section "ServerLayout"
    Identifier     "single head configuration"
    Screen      0  "Screen0" 0 0
EndSection

##
##  Server Flags  (Don't zap false allows you to re-active CTRL+ALT+Backspace via xset) 
##              
Section "ServerFlags"
    Option "DontZap" "false"
EndSection                  

##
## FontPath for the x font server xfs
##                                   
Section "Files"                      
    FontPath    "/usr/share/fonts/local"
    FontPath    "/usr/share/fonts/misc" 
    FontPath    "/usr/share/fonts/Type1"
    FontPath    "/usr/share/fonts/TTF"  
    FontPath    "/usr/share/fonts/75dpi"
    FontPath    "/usr/share/fonts/100dpi"
EndSection      

##
## Module Section, load default modues
##
Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "glx"
    Load           "freetype"
    Load           "type1"
EndSection


##
## Built in Monitor with power saving features enabled 
## and manually specified frequencies as the EDID is a bit broken
##
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Lenovo"
    ModelName      "LEN"
    HorizSync       28.0 - 61.0
    VertRefresh     43.0 - 62.0
    Option         "DPMS"
EndSection

##
## Videocard section. Some of the following options are now default
## and only kept for compatibility reasons with older drivers
## Read the Appendix B of the nvidia README for explanations 
##
Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 140M"

    # bus options (disable agp and specify the bus ID (pci-e)
    Option         "NvAGP" "0"
    BusID          "PCI:1:0:0"
    
    # do not use the frequencies provided by the monitor edid 
    Option         "UseEdidFreqs" "false"
     
    # Allows the driver to enable VBlank interrupt generation only when it is required
    # Saves power, as there are less wakeups
    Option         "OnDemandVBlankInterrupts" "true"
    
    # allow underclocking
    Option         "Coolbits" "1"
    
    # enable the X Resize and Rotation extension
    Option         "RandRRotation" "true"


    # speed up 2d by actiavting the RENDER extension (default by now) and using
    # DAMAGE to only update regions of the screen which actually changed. 
    # Also activating BackingStore which keeps pixel data for occluded window regions
    # and activating TripleBuffer. ARGBGLXVisuals are now enabled by default 
    Option         "RenderAccel" "true"
    Option         "UseEvents" "false"
    Option         "TripleBuffer" "1"
    Option         "DamageEvents" "1"
    Option         "BackingStore" "1"
    Option	   "AllowIndirectPixmaps" "true"
    Option	   "AddARGBGLXVisuals" "True"

    # If some applications (e.g. xchat) need SHM Pixmaps then remove this line
    Option         "AllowSHMPixmaps" "False"
EndSection


##
## Screen Section
##
Section "Screen"
	Identifier   "Screen0"
	Device       "Videocard0"
	Monitor      "Monitor0"
	DefaultDepth  24
	Option       "AddARGBGLXVisuals" "true"
	Option	     "UseCompositeWrapper" "true"
	SubSection "Display"
		Viewport  0 0
		Depth     24
		Modes     "1440x900" "1024x768" "800x600" 
	EndSubSection
	SubSection "Display"
		Viewport  0 0
		Depth     16
		Modes	  "1440x900" "1024x768" "800x600" 
	EndSubSection
	        SubSection "Display"
	        Viewport  0 0
		Depth     8
		Modes     "1440x900" "1024x768" "800x600" 
	EndSubSection
EndSection

##
## Extensions, load composite for compiz (should be default by now) 
##
Section "Extensions"
    Option         "Composite" "Enable"
EndSection

xmodmap

Note: you have to xmodmap /path/to/file this file in your autostart. You might have different keycodes, use the application xev to display them. It is highly recommended to use the XF86foobar buttons, as some applications will be preconfigured to them. If you want to map them by yourself use Fxx, while xx > 12.



! additional Arrow keys

keycode 233 = XF86Forward
keycode 234 = XF86Back

! Fn+arrow keys

keycode 144 = XF86AudioPrev
keycode 162 = XF86AudioPlay
keycode 153 = XF86AudioNext
keycode 164 = XF86AudioStop


! Fn+Fx keys  F2, F3, F4, F5, F7, F8, F9, F12  in this order

keycode 146 = XF86ScreenSaver
keycode 241 = XF86Display
keycode 223 = XF86Sleep
keycode 243 = XF86Send
keycode 214 = XF86Video
keycode 196 = XF86iTouch
keycode 197 = XF86Eject
keycode 165 = XF86Standby


! Space bar

keycode 148 = XF86ZoomIn

 
! volume control (mute is hardwired)

keycode 174 = XF86AudioLowerVolume
keycode 176 = XF86AudioRaiseVolume


default.sh (acpid)

This is my slightly modified default.sh file to handle ibm hotbutton events. Of course you can add the other buttons as well, however, as they produce key events there are easier ways for configuring the actions. However, an acpi solution is window manager / X independent.

You can read out the key events, as they might differ on your model, with the acpi_listen application.

<bash>

  1. !/bin/sh
  2. /etc/acpi/default.sh

set $*

group=${1%%/*} action=${1#*/} device=$2 id=$3 value=$4

if [ "$group" = "ibm" ]; then key="$2"\ "$3"\ "$4" fi

log_unhandled() { logger "ACPI event unhandled: $*" }

case "$group" in button) case "$action" in power) /sbin/init 0 ;;

*) log_unhandled $*

                               ;;

esac ;;

ibm) case "$action" in hotkey) case "$key" in "HKEY 00000080 00001008") /usr/bin/acpi_fakekey 220 ;; "HKEY 00000080 00001009") /usr/bin/acpi_fakekey 221 ;; "HKEY 00000080 00001014") /usr/bin/acpi_fakekey 222 ;; *) logger "acpid: $group/$action $key is not defined" ;;

esac ;; *)

                       ;;	

esac ;;

*) log_unhandled $*

               ;;

esac </bash>

Note that I use acpi_fakekey to translate acpi to key events.

ACPI Fakekey

With this nice app you can translate acpi events into key codes.

I borrowed it from gentoos acpi-support, which borrowed it from Ubuntu people.

You can it out of the sunrise overlay, I recommend only getting the acpi-fakekey.c file and compile it.

For the lazy guys:

There is an explanation and the source code, which I wont copy and paste here, on this page:

Gentoo Wiki on Hotkeys

I use this in the file above to generate keycodes for Fn+F8, Fn+F9 and Fn+Space.

Kernel configuration

2.6.24 TOI Kernel config

Please note: this configuration works for my setup, it might not for yours.

I use ext3 as my file system, make sure to compile in the support for the file system you are using, at least for the root partition.

I also use external ALSA drivers. But I use lots of stuff you probably will never use, such as several gamepads, acl support for ext3, some ipv4 / ipv6 filters ... You might want to remove those.

This is the configuration for a 2.6.24 Kernel, it differs a little bit from the configuration of earlier kernels.

Unstable Kernels and updates

2.6.27

Recently, 2.6.27 gentoo hit portage. There are several imporant changes.

My kernel config is here, the hdaps patch is here. Please note that you need a recent hdpasd to work with this new version.

Intels Wifi module is now split up and named iwlagn and iwlcore.

Suspend and Hibernate work without Tux on Ice kernels. (Just be patient with hibernate, you'll get a black screen for a while before it comes back up)

You also need a recent nvidia driver to work with the new kernel.